Converto dump trailer landing leg
-
- G-Master Sergeant
- Posts: 113
- Joined: Sun Sep 25, 2011 9:32 pm
- Location:
Converto dump trailer landing leg
Can anyone give me measurements and dimensions etc for the Converto landing leg ? I need the info so I can fabricate one as I’m missing mine and they are impossible to find ;( someone here reproduced them for a bit but I think that opportunity has passed . Thank you in advance for any help Casey
-
- G-Corporal
- Posts: 28
- Joined: Mon Sep 01, 2003 6:23 pm
- Location: Anderson, Indiana
Re: Converto dump trailer landing leg
I'm also looking for a pattern for the landing leg for the Converto, especially the curved part with two holes in it that is welded to the leg itself.
-
- G-Master Sergeant
- Posts: 113
- Joined: Sun Sep 25, 2011 9:32 pm
- Location:
Re: Converto dump trailer landing leg
Thank goodness it’s not just me !!;)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Converto dump trailer landing leg
And me too.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Corporal
- Posts: 28
- Joined: Mon Sep 01, 2003 6:23 pm
- Location: Anderson, Indiana
Re: Converto dump trailer landing leg
Anybody out there who would be willing to trace out the curved part of the landing leg with the two holes in it that I could use for a pattern? We are fabricating a landing leg using a stock landing leg and welding the square stock with a the hole in it and the curved piece to it. Also, does anyone know the outside diameter of the round stock that holds the lunette? We will be machining that as well.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Converto dump trailer landing leg
Please post if you plan on doing a run of them. I would love to secure an order to help defray costs of set up.dhartzell wrote: ↑Wed Jun 26, 2019 1:56 pmAnybody out there who would be willing to trace out the curved part of the landing leg with the two holes in it that I could use for a pattern? We are fabricating a landing leg using a stock landing leg and welding the square stock with a the hole in it and the curved piece to it. Also, does anyone know the outside diameter of the round stock that holds the lunette? We will be machining that as well.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Master Sergeant
- Posts: 113
- Joined: Sun Sep 25, 2011 9:32 pm
- Location:
Re: Converto dump trailer landing leg
I would also order anything you’re going to make
-
- G-Corporal
- Posts: 28
- Joined: Mon Sep 01, 2003 6:23 pm
- Location: Anderson, Indiana
Re: Converto dump trailer landing leg
I got some great drawings from jeep draw for the lunette socket and the landing leg, so I no longer need the patterns. I do need some information on the size of the springs for the tailgate lock. Dimensions would be great.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Converto dump trailer landing leg
Nice!
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Master Sergeant
- Posts: 113
- Joined: Sun Sep 25, 2011 9:32 pm
- Location:
Re: Converto dump trailer landing leg
Cool I will get the drawings there as well
Who is online
Users browsing this forum: No registered users and 36 guests