Wingnutt's Flea Market Frenzy - Version 2019

Manufacturers, configurations, Shovels, Axe, Wrenches, Oiler, F/E etc.
Post Reply
User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Fri Jan 04, 2019 1:30 pm

Assuming that seller knows his stuff. I wish I knew how he was dating them to c.1915. If the serial numbers are sequential, as one would expect, mine is almost 1,000 units older than his.
TEMPORARY DUTY

User avatar
Silly's MB
G-Colonel
G-Colonel
Posts: 1959
Joined: Wed Sep 01, 2010 1:53 am
Location: North East Hampshire, UK

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Silly's MB » Sat Jan 05, 2019 3:46 am

I have some W.Watson Bino’s from 1916, I will upload some pictures later. Very silmilar markings so yours look to be early.
Limited access.
1942 August Willys MB
Complete MVMTS 100% sourced in the ETO

Empty vessels make the most noise .......

User avatar
Silly's MB
G-Colonel
G-Colonel
Posts: 1959
Joined: Wed Sep 01, 2010 1:53 am
Location: North East Hampshire, UK

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Silly's MB » Sat Jan 05, 2019 1:51 pm

Here are mine, unfortunately a different model so I suspect the serial numbers will have a different sequence.
These are named to a Lieutenant R.A. Lusty of the 12th Battalion, Royal Sussex Regiment .( My Grandfather was in the 13th Batt. Royal Sussex Regiment. Taken prisoner at 3rd Battle of Ypres)
IMG_4513.JPG
IMG_4513.JPG (136.6 KiB) Viewed 541 times
IMG_4514.JPG
IMG_4514.JPG (202.03 KiB) Viewed 541 times
IMG_4517.JPG
IMG_4517.JPG (193.05 KiB) Viewed 541 times
IMG_4518.JPG
IMG_4518.JPG (162.8 KiB) Viewed 541 times
IMG_4519.JPG
IMG_4519.JPG (108.51 KiB) Viewed 541 times
IMG_4520.JPG
IMG_4520.JPG (107.33 KiB) Viewed 541 times
IMG_4521.JPG
IMG_4521.JPG (244.03 KiB) Viewed 541 times
IMG_4522.JPG
IMG_4522.JPG (253 KiB) Viewed 541 times
Limited access.
1942 August Willys MB
Complete MVMTS 100% sourced in the ETO

Empty vessels make the most noise .......

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Sat Jan 05, 2019 6:50 pm

Thanks, Rog. Those are sweet! And spittin' image except for the markings. No date on mine, and no broad arrows.
TEMPORARY DUTY

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Thu Jan 17, 2019 10:21 am

I found a 1942 (brass label, General Detroit, not General Fire Truck) S-O-S Fire Guard fire extinguisher at the flea market this morning and a dozen or so issues of Stars and Stripes, all from WWII. The FE has a few small dings and is slightly tarnished, but overall in excellent condition, and most of the original finish is intact, the original brass label is totally legible, and it will clean up nicely.

20190117_093103_resized.jpg
20190117_093103_resized.jpg (180.95 KiB) Viewed 501 times
20190117_093121_resized.jpg
20190117_093121_resized.jpg (99.42 KiB) Viewed 501 times
20190117_093127_resized.jpg
20190117_093127_resized.jpg (201.03 KiB) Viewed 501 times
TEMPORARY DUTY


User avatar
Fred Coldwell
G-Brigadier General
G-Brigadier General
Posts: 2233
Joined: Sat Dec 14, 2002 7:12 am
Location: Denver, Colorado, USA

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Fred Coldwell » Thu Jan 17, 2019 10:27 am

Wing:

Congratulations on acquiring that beautiful General Detroit S-O-S fire extinguisher! That's a real score in my book. And the Stars and Stripes will provide some delightful wintertime fireside reading. Happy New Year!
Happy Jeep Trails,

Fred Coldwell
1944 CJ2-09 - X33
1945 CJ2-26 - X50
1944 Dodge T233 CC
1945 Dodge T233 Utility
MVPA #283C

AZ Jeff
G-Lieutenant General
G-Lieutenant General
Posts: 6040
Joined: Fri Dec 13, 2002 7:05 pm
Location: Patagonia, AZ EIEIO

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by AZ Jeff » Thu Jan 17, 2019 11:11 am

Not only do our (SE AZ) flea markets -- aka "Swap Meets" -- suck as a rule, but they're never on a Thursday... I'm envious Mr. Nutt. :wink:

/s/Saving Money Every Weekend (caus' there's nothing to buy at our flea markets)
AZ

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Thu Jan 17, 2019 12:22 pm

Fred Coldwell wrote:
Thu Jan 17, 2019 10:27 am
Congratulations on acquiring that beautiful General Detroit S-O-S fire extinguisher! That's a real score in my book. And the Stars and Stripes will provide some delightful wintertime fireside reading. Happy New Year!
Thanks, Fred! Good to see you checking in now and again. And Happy New Year to you, too, sir!
AZ Jeff wrote:
Thu Jan 17, 2019 11:11 am
Not only do our (SE AZ) flea markets -- aka "Swap Meets" -- suck as a rule, but they're never on a Thursday... I'm envious Mr. Nutt. :wink:
/s/Saving Money Every Weekend (caus' there's nothing to buy at our flea markets)
AZ
I am lucky. I have three regular spots, all more or less on my way to work. This one is known for Thursdays. Go there on a Sunday and it will be a ghost town. I also have a Wednesday spot, which is also my second stop on a Friday, but that one is closed until spring. My first Friday spot is open year round, and it is also good on Sundays. I am usually too busy to get out on Saturdays, and Saturday, Monday and Tuesday are really the only days I am not walking around a flea market. Believe it or not, as I inch up on permanent empty nest retirement status, leaving my flea markets is a little entry on the "Con" side of the mental ledger in my head! :)
TEMPORARY DUTY

phantomfixer
G-First Sergeant
G-First Sergeant
Posts: 143
Joined: Fri Jul 12, 2013 6:15 pm
Location: Dover DE

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by phantomfixer » Thu Jan 17, 2019 2:46 pm

pretty nice stars and stripes...agree it will be good reading...grandfather was in Anzio with the 36th....
USAF retired
M-367
1946 2A

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Thu Jan 17, 2019 4:53 pm

phantomfixer wrote:
Thu Jan 17, 2019 2:46 pm
...agree it will be good reading...
They make great Living History Display accents on a cot, a field desk, a jeep back seat, or tucked inside a toolbox too! 8)
TEMPORARY DUTY

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Sat Jan 26, 2019 3:06 pm

Half of my two-item haul today - the little critter at the bottom - is all Don's fault! :shock: :D

20190126_103126.jpg
20190126_103126.jpg (221.19 KiB) Viewed 418 times

It is a PEXTO #2 rivet set and header. Or, in official upper-echelon ORD 6 SNL G-27 stockage-speak...

41-S-2323 | SET and HEADER, rivet, coppersmiths', tinsmiths', and saddlers', size No. 2, length 5 in.

20190125_181143.jpg
20190125_181143.jpg (174.37 KiB) Viewed 418 times
20190125_181207.jpg
20190125_181207.jpg (124.05 KiB) Viewed 418 times
I have seen these from time to time, usually in onesy-twosies, and usually unmarked (rivet sets and headers are a fairly common shop-made tool), and I have not had much interest. But now that Don planted the eyeworm, I guess I will be bringing some home. :evil: :lol:

Unfortunately, someone with the initials "A.S." really liked this PEXTO jobbie apparently, and he may not have liked the litle hole that some of them have through the body, as he appears to have filled it with brazing. It also needs to be groomed on the striking end. I will add it to the list of small winter projects. :)

The socket set is neither wartime or military.
TEMPORARY DUTY

henry501
G-First Lieutenant
G-First Lieutenant
Posts: 623
Joined: Thu Jun 06, 2013 1:53 am

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by henry501 » Sun Jan 27, 2019 2:10 am

Greg,

Nice Pexto rivet set. Are they also part of the trimmer’s set? Also, if you don’t decide to go into the saddlery business you can always use it to set the copper rivers in your jeans but for the fact that a #2 setter may be too large for that job. So, you might have to get more of these. :D

Thank you,
Henry

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Sun Jan 27, 2019 11:41 am

Today's take...

20190127_090400.jpg
20190127_090400.jpg (201 KiB) Viewed 377 times

That 25-foot length of vintage manila rope will be spliced into a bumper tow rope right quick. That brass canister with the threaded lid with the ears for opening and closing is not wartime or military, I don't think, but the swabees out there may appreciate it. It's off a ship. Those sticks inside it are old signal flares.

20190127_090507.jpg
20190127_090507.jpg (151.36 KiB) Viewed 377 times
20190127_101356.jpg
20190127_101356.jpg (195.16 KiB) Viewed 377 times
20190127_101408.jpg
20190127_101408.jpg (178.25 KiB) Viewed 377 times
20190127_101517.jpg
20190127_101517.jpg (113.96 KiB) Viewed 377 times
TEMPORARY DUTY

User avatar
mudbox
G-Colonel
G-Colonel
Posts: 1366
Joined: Wed Oct 27, 2010 4:09 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by mudbox » Sun Feb 10, 2019 11:18 am

You're having a stellar year of finds already Wingnutt! I'm going to have to try and play catchup. I finally made it to the flea for the first time this year.
I managed to bring home a few wartime items. Chrome plated Plomb WF-85, Vlchek and OTC combos, and an Androck slotted driver. Oh, and this heavy steel case containing a Brown and Sharpe dial indicator, but with a Starrett gauge.

Image

Image

Also, it feels a bit brittle, but I thought you may be interested in this K-D battery strap?

Image

-Jason

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 4628
Joined: Mon Oct 24, 2011 2:17 pm

Re: Wingnutt's Flea Market Frenzy - Version 2019

Post by Wingnutt » Sun Feb 10, 2019 8:48 pm

mudbox wrote:
Sun Feb 10, 2019 11:18 am
Also, it feels a bit brittle, but I thought you may be interested in this K-D battery strap?
Already got one, Mud. But thanks for thinking of me.
TEMPORARY DUTY

Post Reply

Return to “G503 Tools & Equipment ( Vehicle & Pioneer)”

Who is online

Users browsing this forum: parker007 and 5 guests