Mutt lift kit
- MrMVS
- G-Staff Sergeant
- Posts: 52
- Joined: Wed Aug 08, 2012 9:37 am
- Location:
Re: Mutt lift kit
the easy way to "lift the front" is to install the rear coil out of the A1 in the front ..its a couple coils longer and will "level"out the mutt,you will need to re shim the lower control arms to get the caster/camber adjusted...hope this helps
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Mutt lift kit
Putting stronger springs on an A1 is just setting yourself up for a rollover! If you really need to raise the front just shim the entire front suspension assembly down. Four bolts. What you are proposing will put a strain on the ball joints and axle joints.
Rick
Rick
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Who is online
Users browsing this forum: No registered users and 1 guest