Has anyone used the Joes Motor Pool GP Fuel lines?
Moderator: DavidA
-
- G-Command Sergeant Major
- Posts: 234
- Joined: Sat May 05, 2007 12:07 pm
- Location:
Has anyone used the Joes Motor Pool GP Fuel lines?
I'm plumbing the fuel lines on my 2nd series GP and the JMP soft fuel lines are confusing to say the least. From looking at the valve on the fuel tank and the unions on the filter I'm guessing the soft lines should have an inverted flared fitting but they are just a flat ended. Not to mention the line is too small for the tank valve. Does anyone have experience with these lines from JMP?
-
- G-First Sergeant
- Posts: 141
- Joined: Sat Oct 27, 2007 2:20 pm
- Location:
Re: Has anyone used the Joes Motor Pool GP Fuel lines?
sorry ,but we dont make GP fuel lines, only oil lines.
Thanks
Dean
Thanks
Dean
DUKW
4 x GPA
1 x BRC
1 x MA
3 x GP 4WS
1 x XA
A few slats and scripts
Joes Motor Pool
4 x GPA
1 x BRC
1 x MA
3 x GP 4WS
1 x XA
A few slats and scripts
Joes Motor Pool
-
- G-Command Sergeant Major
- Posts: 234
- Joined: Sat May 05, 2007 12:07 pm
- Location:
Re: Has anyone used the Joes Motor Pool GP Fuel lines?
Thanks for the reply Dean. I'm really confused now.....
https://www.joesmotorpool.com/fuel-syst ... l-line-set
https://www.joesmotorpool.com/fuel-syst ... l-line-set
-
- G-First Sergeant
- Posts: 141
- Joined: Sat Oct 27, 2007 2:20 pm
- Location:
Re: Has anyone used the Joes Motor Pool GP Fuel lines?
Oh , those fuel lines..... sorry forgot we made them.
There is a steel fuel line that connects between the fuel tank cock and into one of these flexi pipes. it then goes on the to the fuel filter and comes off the fuel filter with the other flexible line in the picture.
If that make sense.
i have a drawing of the pipe layout and sizes if you need it. Even better if you can read dwg/dxf files.
Thanks
Dean
There is a steel fuel line that connects between the fuel tank cock and into one of these flexi pipes. it then goes on the to the fuel filter and comes off the fuel filter with the other flexible line in the picture.
If that make sense.
i have a drawing of the pipe layout and sizes if you need it. Even better if you can read dwg/dxf files.
Thanks
Dean
DUKW
4 x GPA
1 x BRC
1 x MA
3 x GP 4WS
1 x XA
A few slats and scripts
Joes Motor Pool
4 x GPA
1 x BRC
1 x MA
3 x GP 4WS
1 x XA
A few slats and scripts
Joes Motor Pool
Who is online
Users browsing this forum: No registered users and 18 guests