GPW inner frame channel needed

[matt506]

Many years ago I restored my GPW and it had frame issues. The inner fram on the drivers side was rotted so a place made it useing 1/4 steel. As I’m collecting parts I’d like to replace this section with a thinner origin ie e. And rusted or bad frames out there. I’m in Wisconsin if that helps. Thanks Matt.

[Weaseler]

I have a couple gpw frames pm me with a pic of wat u need

[matt506]

Ok will do tomorrow when the sun is up. Thank you sir.

[matt506]

Ok well here are a few weird pics. If these don’t work I’ll shoot from the passenger side over but you can see how crude the holes are. It would be the inner from the rear MG mount crossmember up to the break master cylinder mount. I’ll have to PM them to you as it’s says they are to big. Matt

[Weaseler]

I emailed u pics of the frame

[Eddie Holland]

Matt I have a drivers side rail as I sold the Passenger side.

[Ron E.]

Matt. If you are still looking for a frame, check my post of 28 July, # 226238. If interested , will send you pics by E mail. Make me an offer.Ron E.