Hi All,
Can anyone fill me in with the location of the holes on each fender to secure the air deflectors to, I have the Jeep Draw drawings for both but neither show the Slat holes - I need the distance from the hole centres to the fender front edge?
On the same subject, what type of fitting was used to secure the air deflectors to the fenders, hex bolt? domed bolt? pan head bolt? or something completely different??
Thanks,
Peter
AIR DEFLECTOR HOLES AND BOLTS
-
- G-Master Sergeant
- Posts: 105
- Joined: Sun Apr 29, 2007 1:25 pm
- Location: Yorkshire, England.
- Bangle 99
- Underwater Explosive Recovery Specialist
- Posts: 1484
- Joined: Fri Jan 19, 2007 9:28 am
- Location: Edmond, Oklahoma
- Contact:
Re: AIR DEFLECTOR HOLES AND BOLTS
Have you tried jeepdraw.com? His plans at $2 USD per are to perfect scale.
James Teel
Retired Police Sergeant/Bomb Tech
SFC OKARNG
Edmond, Oklahoma
MVPA 30889
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
James Teel
Retired Police Sergeant/Bomb Tech
SFC OKARNG
Edmond, Oklahoma
MVPA 30889
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
James Teel
Police Sergeant/Bomb Tech-Ret.
SFC OKARNG-Ret.
Edmond, Oklahoma
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
Police Sergeant/Bomb Tech-Ret.
SFC OKARNG-Ret.
Edmond, Oklahoma
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
-
- G-Master Sergeant
- Posts: 105
- Joined: Sun Apr 29, 2007 1:25 pm
- Location: Yorkshire, England.
Re: AIR DEFLECTOR HOLES AND BOLTS
Thanks James,
I did mention that I had the jeep Draw fender drawings but, as I said, they do not show the air deflector holes - unless I have missed another drawing on Jeep Draw.
Peter
I did mention that I had the jeep Draw fender drawings but, as I said, they do not show the air deflector holes - unless I have missed another drawing on Jeep Draw.
Peter
- Bangle 99
- Underwater Explosive Recovery Specialist
- Posts: 1484
- Joined: Fri Jan 19, 2007 9:28 am
- Location: Edmond, Oklahoma
- Contact:
Re: AIR DEFLECTOR HOLES AND BOLTS
You sure did. I missed that. Maybe contact Jon directly and see if he can help you with that. He’s very helpful.
James Teel
Retired Police Sergeant/Bomb Tech
SFC OKARNG
Edmond, Oklahoma
MVPA 30889
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
James Teel
Retired Police Sergeant/Bomb Tech
SFC OKARNG
Edmond, Oklahoma
MVPA 30889
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
James Teel
Police Sergeant/Bomb Tech-Ret.
SFC OKARNG-Ret.
Edmond, Oklahoma
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
Police Sergeant/Bomb Tech-Ret.
SFC OKARNG-Ret.
Edmond, Oklahoma
'43 Willys MB/ITM jeep
‘42 SS Cars lightweight trailer
<><
-
- G-Lieutenant General
- Posts: 4526
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: AIR DEFLECTOR HOLES AND BOLTS
can you measure off the part itself? If it isnt buried under the snow I will measure this one.
Adam
Adam
- Hobo
- G-Lieutenant General
- Posts: 4929
- Joined: Sat Aug 09, 2003 8:55 am
- Location: Dithmarschen, "G" - ermany
Re: AIR DEFLECTOR HOLES AND BOLTS
Hey Peter!
They used slotted pen head bolts, as can be seen in the previous picture posted by Adam. As far as measurements, I hope that these pics help:
They used slotted pen head bolts, as can be seen in the previous picture posted by Adam. As far as measurements, I hope that these pics help:
Lars-Uwe Rudek
GPW 213313 (HOBO) DoD 7-26-44
GPW 261254 (SUSIE BLUE) DoD 3-26-45 (est.)
MB 177547 (JONSEY) DoD 9-28-42
MB 290875 (HOBBES) DoD 12-21-43
GPW 213313 (HOBO) DoD 7-26-44
GPW 261254 (SUSIE BLUE) DoD 3-26-45 (est.)
MB 177547 (JONSEY) DoD 9-28-42
MB 290875 (HOBBES) DoD 12-21-43
Who is online
Users browsing this forum: No registered users and 46 guests