WTB 6.5 NA not derated HMMWV engine

[ida34]

I have a 1997 M1097A2 that needs an engine. I am not looking for the derated engine that replaced the 6.2 in the earlier HMMWVs. I want the non-turbo 6.5. I just need a good long block. I have all the accessories including a good injection pump, so the engine does not need to have an injection pump. I will be going to Redball on Saturday and can pick up there if we make a deal. I will also be at Portland Indiana show. Let me know.

Thanks
Chuck

[dilvoy]

The derating of the HMMWV 6.5's was done in the injection pump. They have the same bottom end as the turbo engines with oil cooled pistons.

[ida34]

The derating of the HMMWV 6.5's was done in the injection pump. They have the same bottom end as the turbo engines with oil cooled pistons.

That is what I thought but was not sure. Since my pump is working just fine that makes any 6.5 work for me. I do have a 6.2 in a can but I will only use it as a last resort.

[parker007]

Im not a expert but on my 6.2 chevy i had to have the pump recalibrated when going to a 6.5 to make it run good.

[ida34]

Last call for anyone with one to sell going to either Linden MI show this Friday or Portland Indiana show on Saturday. Let me know.

[ida34]

Still looking bump.

[Falldownjaeger]

I have a 6.5L Turbo long block, a 4L80E TCM, and most of the parts needed to convert the doghouse opening, in the FL panhandle about 2.5hrs from NOLA. If you just want the 6.5l I can separate from the 4L80E.

Also have new oil pan.
New Turbo engine harness
New LH and RH Exhaust Manifolds
New Fan Blade
New cold start/advance sensor

[rhodesniper]

Is the 6.5 turbo and non turbo using the same pistons?

[Action]

Have you checked local junk yards?

Jason