WTB: Ammo Can turret mount
Moderator: Kurt Lesser
-
- G-Master Sergeant
- Posts: 115
- Joined: Thu Jan 25, 2007 4:49 pm
- Location: Tx
WTB: Ammo Can turret mount
I am looking for the mount that holds the 3 bay ammo can to the turret. Looks like the one below.
HMMWV. Always looking for an APC.
-
- G-Staff Sergeant
- Posts: 71
- Joined: Sun Jun 10, 2018 6:24 am
- Location:
Re: WTB: Ammo Can turret mount
You are not the only one brother, I been looking for one also, for along time now
-
- G-Captain
- Posts: 799
- Joined: Sat Feb 11, 2006 11:37 am
- Location: So.Cal
Re: WTB: Ammo Can turret mount
Try 86 humv.
I sold him all my stuff awhile ago.
Not sure if he still has any of it.
I sold him all my stuff awhile ago.
Not sure if he still has any of it.
-
- G-Master Sergeant
- Posts: 115
- Joined: Thu Jan 25, 2007 4:49 pm
- Location: Tx
Re: WTB: Ammo Can turret mount
Already checked with him, he was my first person to ask. He has the can holder, just no mounts/bracket.
HMMWV. Always looking for an APC.
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: WTB: Ammo Can turret mount
That thing went fast.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTB: Ammo Can turret mount
I've got Ted's coming on Thurs, I'll examine it to see what needs to happen to make copies. You can make low volume stamp dies from hard wood like Oak or walnut with careful planning and patience. The Arc piece either needs to be done on a slip roller machine or water jet cut from bar stock. Then bushings for the quick release clevis pins.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Staff Sergeant
- Posts: 71
- Joined: Sun Jun 10, 2018 6:24 am
- Location:
Re: WTB: Ammo Can turret mount
If you decide to make some please contact me I am very interested in obtaining one. Thanks
-
- G-Master Sergeant
- Posts: 119
- Joined: Mon Jan 18, 2016 9:00 am
- Location: NY
Re: WTB: Ammo Can turret mount
I can get you a brand new one for $1k through Military Systems Group. I have done in the past.
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTB: Ammo Can turret mount
Its here and not a stamping. Its a 46lb weldment, main piece is 2" x 6" x 1/4" steel tubing, some 3/8", 1/2", and 3/4" thick flat stock pieces welded together. The turret bearing Arc piece is two pcs welded together, it and the major 3/4" thick flat stock piece need to have CAD drawing made for the shop to water/garnet flow jet cut from plate.
I think the hardest part to source is the black bristle brush trim piece that keeps brass from fouling the turret bearing.
I think the hardest part to source is the black bristle brush trim piece that keeps brass from fouling the turret bearing.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Staff Sergeant
- Posts: 71
- Joined: Sun Jun 10, 2018 6:24 am
- Location:
Re: WTB: Ammo Can turret mount
Not a chance army sergeant.ArmySergeant wrote: ↑Wed Oct 24, 2018 12:33 pmI can get you a brand new one for $1k through Military Systems Group. I have done in the past.
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTB: Ammo Can turret mount
I found somebody nearby to make the CAD dwgs for me so I can get some parts estimates. One of the main parts is a skeletonized triangular piece cut from 3/4" thick plate, just no way to make it clean except CNC plasma or CNC flo-jet cutting. Can somebody send me a pic of the 3 can rack underside where the pins in this mount pass thru the rack? Yeah, I have the support/mount but not the 3 can rack
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: WTB: Ammo Can turret mount
I got the 3 bay can holder copied in the past...have 1 ea. available.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: WTB: Ammo Can turret mount
Btw, there are two different Bracket, Mounting:
CLINN N0 001 M70-336 for M1113
CLINN NO 002 M70-337 for M1025
I have the M1025 version.
https://www.google.com/imgres?imgurl=x- ... t=c&ictx=1
CLINN N0 001 M70-336 for M1113
CLINN NO 002 M70-337 for M1025
I have the M1025 version.
https://www.google.com/imgres?imgurl=x- ... t=c&ictx=1
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Staff Sergeant
- Posts: 71
- Joined: Sun Jun 10, 2018 6:24 am
- Location:
Re: WTB: Ammo Can turret mount
Can you take a tape measure and measure the distance from between the slots where the top 3 bay ammo can holder goes down into the ammo can holder bracket. , Inner edges of slot holes.
-
- G-Staff Sergeant
- Posts: 71
- Joined: Sun Jun 10, 2018 6:24 am
- Location:
Re: WTB: Ammo Can turret mount
I need to check the ammo can holder to see which mounting bracket I need
Last edited by Sof2 on Sat Oct 27, 2018 7:03 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 41 guests