IBES TEK Bumper Mounting Kits

1985 - Present, Vehicles, NO EBAY or COMMERCIAL SALES.

Moderator: Kurt Lesser

Post Reply
ragman
G-Captain
G-Captain
Posts: 716
Joined: Wed Nov 24, 2004 6:48 am
Location: Sharon Center, Ohio

IBES TEK Bumper Mounting Kits

Post by ragman » Fri Jan 18, 2019 1:12 pm

The M998 mounting kits will be done next week and the M1114 kits (hopefully) the following week. The M1114 and M998 share several common parts the only thing left to be made are the inner plates that are mounted between the winch plate and the bumper. My plan is to not add the steel tubing that is welded to the plate, nor would I supply the d-ring and hardware. The reason is that it would make these two piece about $100 more.

That being said I know I like things original so if enough of the M1114/51 buyers want them with the steel tubing welded on I will have that done and supply a source for the other parts.

I will price the bolts tomorrow and post the price for the M998 Mounting kit.
Attachments
M1114IbisTeckMount.jpg
M1114IbisTeckMount.jpg (49.49 KiB) Viewed 791 times


STL Zombiehunter
G-Private First Class
G-Private First Class
Posts: 11
Joined: Sun Dec 30, 2018 5:11 am
Location: St. Louis, MO

Re: IBES TEK Bumper Mounting Kits

Post by STL Zombiehunter » Fri Jan 18, 2019 6:26 pm

Are all of your bumpers allotted for / presold already?
1985 M923 on 53's
1987 M1038 82nd Airborne converted to M1114 ECV w/ 6.5T
1991 M989A1 HEMAT Ammo Trailer

ragman
G-Captain
G-Captain
Posts: 716
Joined: Wed Nov 24, 2004 6:48 am
Location: Sharon Center, Ohio

Re: IBES TEK Bumper Mounting Kits

Post by ragman » Sat Jan 19, 2019 2:09 pm

There are a few left so let me know if you are interested once I have the kits in.

User avatar
Falldownjaeger
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 347
Joined: Fri Dec 18, 2009 1:19 pm
Location: FL, USA

Re: IBES TEK Bumper Mounting Kits

Post by Falldownjaeger » Sat Jan 19, 2019 7:41 pm

K, I'll need a set of M998 hardware for my bumper. And I'll get with you about the MSG Assault Side Cargo Rails.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"

jake-cutter
G-Master Sergeant
G-Master Sergeant
Posts: 115
Joined: Thu Jan 25, 2007 4:49 pm
Location: Tx

Re: IBES TEK Bumper Mounting Kits

Post by jake-cutter » Tue Jan 22, 2019 4:48 am

Just wanted to confirm that the M998 kit will work with the narrow winch plate on the M1026 or is the other kit needed?
HMMWV. Always looking for an APC.

ragman
G-Captain
G-Captain
Posts: 716
Joined: Wed Nov 24, 2004 6:48 am
Location: Sharon Center, Ohio

Re: IBES TEK Bumper Mounting Kits

Post by ragman » Thu Jan 24, 2019 3:58 am

If you are running a winch plate then you should use the M1114 bracket. I don't know if they changed the hole pattern from one winch plate to another but all you really need is a 3/8" piece of A36 steel that you can drill the holes in. They just sandwich the aluminum bumper between metal plates at the attachment points to shore up the mounting point.


Post Reply

Return to “Humvee For Sale”

Who is online

Users browsing this forum: No registered users and 21 guests