The M998 mounting kits will be done next week and the M1114 kits (hopefully) the following week. The M1114 and M998 share several common parts the only thing left to be made are the inner plates that are mounted between the winch plate and the bumper. My plan is to not add the steel tubing that is welded to the plate, nor would I supply the d-ring and hardware. The reason is that it would make these two piece about $100 more.
That being said I know I like things original so if enough of the M1114/51 buyers want them with the steel tubing welded on I will have that done and supply a source for the other parts.
I will price the bolts tomorrow and post the price for the M998 Mounting kit.
IBES TEK Bumper Mounting Kits
Moderator: Kurt Lesser
-
- G-Captain
- Posts: 716
- Joined: Wed Nov 24, 2004 6:48 am
- Location: Sharon Center, Ohio
IBES TEK Bumper Mounting Kits
- Attachments
-
- M1114IbisTeckMount.jpg (49.49 KiB) Viewed 790 times
-
- G-Private First Class
- Posts: 11
- Joined: Sun Dec 30, 2018 5:11 am
- Location: St. Louis, MO
Re: IBES TEK Bumper Mounting Kits
Are all of your bumpers allotted for / presold already?
1985 M923 on 53's
1987 M1038 82nd Airborne converted to M1114 ECV w/ 6.5T
1991 M989A1 HEMAT Ammo Trailer
1987 M1038 82nd Airborne converted to M1114 ECV w/ 6.5T
1991 M989A1 HEMAT Ammo Trailer
-
- G-Captain
- Posts: 716
- Joined: Wed Nov 24, 2004 6:48 am
- Location: Sharon Center, Ohio
Re: IBES TEK Bumper Mounting Kits
There are a few left so let me know if you are interested once I have the kits in.
- Falldownjaeger
- Sergeant Major of the Gee
- Posts: 347
- Joined: Fri Dec 18, 2009 1:19 pm
- Location: FL, USA
Re: IBES TEK Bumper Mounting Kits
K, I'll need a set of M998 hardware for my bumper. And I'll get with you about the MSG Assault Side Cargo Rails.
1995 M1025A2 Orig 5SFG GMV ODA525 "Hammerhead"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
1995 M1025A2 Orig 1st SFC GMV 5 Commanders In Extremis Force GMV
1984 Chenowth Interim Fast Attack Vehicle 061 'Horny Toad"
-
- G-Master Sergeant
- Posts: 115
- Joined: Thu Jan 25, 2007 4:49 pm
- Location: Tx
Re: IBES TEK Bumper Mounting Kits
Just wanted to confirm that the M998 kit will work with the narrow winch plate on the M1026 or is the other kit needed?
HMMWV. Always looking for an APC.
-
- G-Captain
- Posts: 716
- Joined: Wed Nov 24, 2004 6:48 am
- Location: Sharon Center, Ohio
Re: IBES TEK Bumper Mounting Kits
If you are running a winch plate then you should use the M1114 bracket. I don't know if they changed the hole pattern from one winch plate to another but all you really need is a 3/8" piece of A36 steel that you can drill the holes in. They just sandwich the aluminum bumper between metal plates at the attachment points to shore up the mounting point.
Who is online
Users browsing this forum: No registered users and 12 guests