M1151 Rear dividers
Moderator: Kurt Lesser
-
- G-Corporal
- Posts: 24
- Joined: Sun Aug 04, 2013 4:00 pm
- Location:
M1151 Rear dividers
New rear dividers only have 6 left. Can bring to Aberdeen show or ship Fastenal. 800.00 plus shipping. These are Kevlar and steel,very heavy. You must supply your own mounting hardware.
-
- G-Command Sergeant Major
- Posts: 221
- Joined: Fri Apr 15, 2016 7:15 am
- Location: Baltimore
Re: M1151 Rear dividers
Pics?
1994 HMMWV M998A1
1995 HMMWV M1025A2 GMV
2002 HMMWV M1024A2 GMV
2001 HMMWV M1043A2
2001 HMMWV M1123
2000 JD M-Gator
2001 Kawasaki M1030B1 (650)
2000 Kawasaki M1030M1
1995 HMMWV M1025A2 GMV
2002 HMMWV M1024A2 GMV
2001 HMMWV M1043A2
2001 HMMWV M1123
2000 JD M-Gator
2001 Kawasaki M1030B1 (650)
2000 Kawasaki M1030M1
-
- G-Corporal
- Posts: 24
- Joined: Sun Aug 04, 2013 4:00 pm
- Location:
-
- G-Sergeant First Class
- Posts: 79
- Joined: Mon May 11, 2015 4:17 pm
- Location: Provo, Utah
Re: M1151 Rear dividers
Does anyone know if these install under/within the rear lip of the roof on an older style HMMWV? Or are they designed to fit after the roof, within/under the sponsons? The reason I ask, is I would like to possibly install one on a GMV.
-
- G-Corporal
- Posts: 24
- Joined: Sun Aug 04, 2013 4:00 pm
- Location:
Re: M1151 Rear dividers
On the new trucks these attach to the rear sponsons after the lip on the roof,and are positioned at a slight angle. I dont know about the older trucks. in my opinion I think you would be able to use c channel to fab some kind of bracket as they use for the small divider walls in some hmmwvs also they might have to be trimmed also.
-
- G-Private
- Posts: 6
- Joined: Fri Oct 14, 2022 6:26 pm
- Location: Indiana
Re: M1151 Rear dividers
I know this is old, but anyone know where I can get one of these, or the hardware so I can make one? It looks like the two doors just slide in a channel? I don't see any rollers. Are the vertical pins on the handles spring loaded? If anyone has some good pics that would be very appreciated, or I'm happy to buy the setup if someone has it.
-
- G-Sergeant
- Posts: 45
- Joined: Tue Dec 14, 2021 7:36 pm
- Location: FLORIDA
Re: M1151 Rear dividers
If you check FB forum Bobby Schaffer in Florida has just the wall partitions for sale.
Yes the handles are spring loaded.
The wall partitions have an upper and lower rail. Each door has the same shape channel on the top and bottom edge which allows the door to slide into the channel.
Hardware is tuff, but out there...if you need pics pm me.
Yes the handles are spring loaded.
The wall partitions have an upper and lower rail. Each door has the same shape channel on the top and bottom edge which allows the door to slide into the channel.
Hardware is tuff, but out there...if you need pics pm me.
-
- G-Corporal
- Posts: 19
- Joined: Sun Feb 21, 2021 10:20 pm
- Location: G503
Re: M1151 Rear dividers
PM sent
-
- G-Sergeant
- Posts: 45
- Joined: Tue Dec 14, 2021 7:36 pm
- Location: FLORIDA
Re: M1151 Rear dividers
No pm received...
-
- G-Corporal
- Posts: 19
- Joined: Sun Feb 21, 2021 10:20 pm
- Location: G503
Re: M1151 Rear dividers
Still available?
-
- G-Sergeant
- Posts: 45
- Joined: Tue Dec 14, 2021 7:36 pm
- Location: FLORIDA
Re: M1151 Rear dividers
Yes sir , kr120@msn.com try that
- Retired War Horses
- G-Brigadier General
- Posts: 2445
- Joined: Sun Jan 11, 2004 9:45 am
- Location: Northern Calif
- Contact:
Re: M1151 Rear dividers
This listing is years old…the OP hasn’t replied.
Retired War Horses Restoration
Call us for all your HMMWV parts, service, upgrades and conversion needs.
Call us for all your HMMWV parts, service, upgrades and conversion needs.
-
- G-Sergeant
- Posts: 41
- Joined: Sun Jun 21, 2020 9:13 pm
- Location:
Re: M1151 Rear dividers
If these are still available please call me 3607027944 I’ll take one or all of them
-
- G-Corporal
- Posts: 24
- Joined: Sun Aug 04, 2013 4:00 pm
- Location:
Re: M1151 Rear dividers
These dividers have been so many years ago.sorry about the post being left up. There is no more left except for what is on the Internet being sold by other people
-
- G-Private
- Posts: 6
- Joined: Fri Oct 14, 2022 6:26 pm
- Location: Indiana
Re: M1151 Rear dividers
Thank you all for the responses. I think I might start making these if there is much demand. It appears there is some. Can find me on FB Josh Orahood. I build some other parts too.998 humvee wrote: ↑Tue May 30, 2023 9:01 pmIf you check FB forum Bobby Schaffer in Florida has just the wall partitions for sale.
Yes the handles are spring loaded.
The wall partitions have an upper and lower rail. Each door has the same shape channel on the top and bottom edge which allows the door to slide into the channel.
Hardware is tuff, but out there...if you need pics pm me.
Who is online
Users browsing this forum: No registered users and 53 guests