m1151A1w/B1
Moderator: Kurt Lesser
-
- G-Private First Class
- Posts: 9
- Joined: Thu Aug 08, 2013 6:01 am
- Location:
m1151A1w/B1
Hello !
I have an M1151A with the B1 kit...
production was July 2009
NSN 01-540-2038
I need a complete body. I found an NSN of 01-610-0474 using fedlog but the end item on that part is 01-544-9638 which isn't exactly the same...
Does anyone have a database of nsn's for the body? I am looking to rebuild this with little modifications etc. I have a slant back, tons or armor and the turret to put back in, I just want to be sure before I make a huge mistake.
Thank you!
I have an M1151A with the B1 kit...
production was July 2009
NSN 01-540-2038
I need a complete body. I found an NSN of 01-610-0474 using fedlog but the end item on that part is 01-544-9638 which isn't exactly the same...
Does anyone have a database of nsn's for the body? I am looking to rebuild this with little modifications etc. I have a slant back, tons or armor and the turret to put back in, I just want to be sure before I make a huge mistake.
Thank you!
- Ted Gates
- G-Major General
- Posts: 2667
- Joined: Sun Dec 15, 2002 12:13 pm
- Location: Eaton Rapids, MI
Re: m1151A1w/B1
Differences in body are:
Rear fender condensers cut outs on both sides.
Floor penetrations for rear AC evap unit.
Right side inner cowl penetration for AC lines to front evap unit.
Tub is pre-drilled for armor mounting and sponsons.
Lots of nutsert additions for mounting things.
So, there may be a new/used tub like that laying around or if you can still order them from the factory, then that's about it. Else, you will have to convert a standard tub for fitment.
Rear fender condensers cut outs on both sides.
Floor penetrations for rear AC evap unit.
Right side inner cowl penetration for AC lines to front evap unit.
Tub is pre-drilled for armor mounting and sponsons.
Lots of nutsert additions for mounting things.
So, there may be a new/used tub like that laying around or if you can still order them from the factory, then that's about it. Else, you will have to convert a standard tub for fitment.
-
- G-Private First Class
- Posts: 9
- Joined: Thu Aug 08, 2013 6:01 am
- Location:
Re: m1151A1w/B1
Ahhh, that stinks...
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
Re: m1151A1w/B1
Do you just have a chassis, or get one that was crushed?
Jason
Jason
-
- G-Captain
- Posts: 716
- Joined: Wed Nov 24, 2004 6:48 am
- Location: Sharon Center, Ohio
Re: m1151A1w/B1
I have an NOS pred-drilled for armor m1151a1w/b1 body still on the factory pallet and a relatively new one that they cut the rear clip off of and you would have to put the fenders, d-pillar etc. back on. Obviously the second would be much cheaper. PM me if you are interested.
I picked up every body there after that.
I picked up every body there after that.
Last edited by ragman on Tue Oct 16, 2018 6:29 am, edited 3 times in total.
-
- Sergeant Major of the Gee
- Posts: 452
- Joined: Sun Dec 23, 2012 8:42 am
- Location: S.E. Wisconsin
Re: m1151A1w/B1
The AM General part number for the M1151a1 w/b1 body is 5717501.
-
- G-Private First Class
- Posts: 9
- Joined: Thu Aug 08, 2013 6:01 am
- Location:
Re: m1151A1w/B1
I have a truck that was involved in an accident.
I need a frame rail and some front end components.
I need a frame rail and some front end components.
-
- G-Captain
- Posts: 716
- Joined: Wed Nov 24, 2004 6:48 am
- Location: Sharon Center, Ohio
Re: m1151A1w/B1
Which side - I have multiple sets of REV rails with the right side being something I can get my hands on easier than the left. Where are you located? If you buy a body from AMG you better plan on picking it up in South Bend - they don't crate it and trucking companies cannot be trusted to take any special care - I know from experience.
I picked up every new body after that.
I picked up every new body after that.
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: m1151A1w/B1
I have the front end parts when you need them.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
Who is online
Users browsing this forum: No registered users and 65 guests