m1151A1w/B1

1985 - Present, Questions, discussions, regarding anything related to the Humvee. (NO AUCTION or EBAY)

Moderator: Kurt Lesser

Post Reply
shaner
G-Private First Class
G-Private First Class
Posts: 7
Joined: Thu Aug 08, 2013 7:01 am

m1151A1w/B1

Post by shaner » Mon Oct 15, 2018 6:06 am

Hello !

I have an M1151A with the B1 kit...

production was July 2009

NSN 01-540-2038

I need a complete body. I found an NSN of 01-610-0474 using fedlog but the end item on that part is 01-544-9638 which isn't exactly the same...

Does anyone have a database of nsn's for the body? I am looking to rebuild this with little modifications etc. I have a slant back, tons or armor and the turret to put back in, I just want to be sure before I make a huge mistake.

Thank you!

User avatar
Ted Gates
G-Brigadier General
G-Brigadier General
Posts: 2325
Joined: Sun Dec 15, 2002 2:13 pm
Location: Eaton Rapids, MI

Re: m1151A1w/B1

Post by Ted Gates » Mon Oct 15, 2018 7:58 am

Differences in body are:
Rear fender condensers cut outs on both sides.
Floor penetrations for rear AC evap unit.
Right side inner cowl penetration for AC lines to front evap unit.
Tub is pre-drilled for armor mounting and sponsons.
Lots of nutsert additions for mounting things.

So, there may be a new/used tub like that laying around or if you can still order them from the factory, then that's about it. Else, you will have to convert a standard tub for fitment.

shaner
G-Private First Class
G-Private First Class
Posts: 7
Joined: Thu Aug 08, 2013 7:01 am

Re: m1151A1w/B1

Post by shaner » Mon Oct 15, 2018 8:57 am

Ahhh, that stinks...

Action
G-Lieutenant General
G-Lieutenant General
Posts: 4444
Joined: Mon Feb 06, 2006 5:19 pm
Location: SW Florida
Contact:

Re: m1151A1w/B1

Post by Action » Mon Oct 15, 2018 9:02 am

Do you just have a chassis, or get one that was crushed?

Jason

ragman
G-First Lieutenant
G-First Lieutenant
Posts: 692
Joined: Wed Nov 24, 2004 8:48 am
Location: Sharon Center, Ohio

Re: m1151A1w/B1

Post by ragman » Mon Oct 15, 2018 10:47 am

I have an NOS pred-drilled for armor m1151a1w/b1 body still on the factory pallet and a relatively new one that they cut the rear clip off of and you would have to put the fenders, d-pillar etc. back on. Obviously the second would be much cheaper. PM me if you are interested.

I picked up every body there after that.
Last edited by ragman on Tue Oct 16, 2018 7:29 am, edited 3 times in total.


metalman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 409
Joined: Sun Dec 23, 2012 10:42 am
Location: S.E. Wisconsin

Re: m1151A1w/B1

Post by metalman » Mon Oct 15, 2018 6:51 pm

The AM General part number for the M1151a1 w/b1 body is 5717501.

shaner
G-Private First Class
G-Private First Class
Posts: 7
Joined: Thu Aug 08, 2013 7:01 am

Re: m1151A1w/B1

Post by shaner » Tue Oct 16, 2018 5:11 am

I have a truck that was involved in an accident.

I need a frame rail and some front end components.

ragman
G-First Lieutenant
G-First Lieutenant
Posts: 692
Joined: Wed Nov 24, 2004 8:48 am
Location: Sharon Center, Ohio

Re: m1151A1w/B1

Post by ragman » Tue Oct 16, 2018 7:27 am

Which side - I have multiple sets of REV rails with the right side being something I can get my hands on easier than the left. Where are you located? If you buy a body from AMG you better plan on picking it up in South Bend - they don't crate it and trucking companies cannot be trusted to take any special care - I know from experience.

I picked up every new body after that.

User avatar
86humv
G-Brigadier General
G-Brigadier General
Posts: 2450
Joined: Sat Aug 20, 2005 12:54 pm
Location: SO. CAL.

Re: m1151A1w/B1

Post by 86humv » Tue Oct 16, 2018 11:03 am

shaner wrote:
Tue Oct 16, 2018 5:11 am
I have a truck that was involved in an accident.

I need a frame rail and some front end components.
I have the front end parts when you need them.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer

Post Reply

Return to “Humvee Technical Knowledge Base -”

Who is online

Users browsing this forum: No registered users and 4 guests