m1114 c partition
Moderator: Kurt Lesser
-
- G-Major
- Posts: 939
- Joined: Fri Aug 29, 2008 10:24 am
- Location: Lexington,SC.
m1114 c partition
Ok guys I've got myself a C partition and I want to install it. Problem is I don't have any of the brackets to bolt it in. I figure I'd just make them. So what I need are some pics of exactly where this thing goes because without the brackets I don't have anything to locate it in place.
I've searched google images and other sources for about a week and all I can find are 1150 and 60 series trucks. The local base and NG sites have also gotten rid of all the older 1114 trucks.
Does anyone have some interior shots of this thing installed? I've looked in the TM's and they are not good enough for what I'm trying to do.
If anyone has any of these brackets I need um. At least to duplicate them.
I've searched google images and other sources for about a week and all I can find are 1150 and 60 series trucks. The local base and NG sites have also gotten rid of all the older 1114 trucks.
Does anyone have some interior shots of this thing installed? I've looked in the TM's and they are not good enough for what I'm trying to do.
If anyone has any of these brackets I need um. At least to duplicate them.
XM818 W/W
M35A2 W/W .69 OD gears.
M1151
M35A2 W/W .69 OD gears.
M1151
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
I have been wanting one of those do you have one for sale thats in the picture?
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- G-Major
- Posts: 939
- Joined: Fri Aug 29, 2008 10:24 am
- Location: Lexington,SC.
Re: m1114 c partition
Hell On Wheels wrote:I have been wanting one of those do you have one for sale thats in the picture?
I have one like the one thats in the picture. it's not for sale but I could maybe copy one for you. it won't be cheap though.
XM818 W/W
M35A2 W/W .69 OD gears.
M1151
M35A2 W/W .69 OD gears.
M1151
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
Copy, you mean make it? If it exact them PM on cost
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- G-Major
- Posts: 939
- Joined: Fri Aug 29, 2008 10:24 am
- Location: Lexington,SC.
Re: m1114 c partition
I can have the partition made but it won't have the door in it. If your looking for 100% authentic then keep trying to find an original one. I spent 4 years looking for mine.Hell On Wheels wrote:Copy, you mean make it? If it exact them PM on cost
XM818 W/W
M35A2 W/W .69 OD gears.
M1151
M35A2 W/W .69 OD gears.
M1151
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
Well Im looking for the 1152 version back panel, if you can make one, thats fine with me, send me some type of picture or drawing to see what your plan is and your price.
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: m1114 c partition
Hey is this the partition you are talking about? I'm looking for one too....
- Attachments
-
- hmmwv midgate1.jpg (122.38 KiB) Viewed 3020 times
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
No that's a sponson panel, I'm looking for a back wall found on 1152, basically a four door hmmwv with no sponson or rear hatch
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: m1114 c partition
Got it... I'm using the 4 man soft top, but I want a divider to keep the stuff thats supposed to be in the bed, in the bed.
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
Here is the back panel Im looking for. It might be a reach but would like to see or try.
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- G-Second Lieutenant
- Posts: 529
- Joined: Fri Aug 12, 2011 6:47 pm
- Location: Spring Lake, NC
Re: m1114 c partition
that almost looks like the ones I issued out in South Korea in 2009/2010.
The only thing that I see missing is the star centered on the tailgate.
Due to the lack of storage from the wagon canvas setup to the M1165, we installed Generator Tool Boxes (Ordered 6 at the same time so they all matched, that seemed to be the key) and installed them on the metal over the wheel wells (the flat smooth piece, not the actual top of the fenders). Looked great and gave them some enclosed lockable storage outside of the cab.
The only thing that I see missing is the star centered on the tailgate.
Due to the lack of storage from the wagon canvas setup to the M1165, we installed Generator Tool Boxes (Ordered 6 at the same time so they all matched, that seemed to be the key) and installed them on the metal over the wheel wells (the flat smooth piece, not the actual top of the fenders). Looked great and gave them some enclosed lockable storage outside of the cab.
11B Oct03-Aug08
91A Aug08-Mar12
90A Mar12-Apr15
Fort Bragg, NC
"Train to Maintain!"
My Trucks:
1951 M38
1977 M880 Dodge (restoration in progress)
2006 Dodge Ram 2500, Quad Cab, Short Bed, Cummins Turbo Diesel
91A Aug08-Mar12
90A Mar12-Apr15
Fort Bragg, NC
"Train to Maintain!"
My Trucks:
1951 M38
1977 M880 Dodge (restoration in progress)
2006 Dodge Ram 2500, Quad Cab, Short Bed, Cummins Turbo Diesel
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: m1114 c partition
I think I'm going to go this route with my wall, I made it out of cardboard, in the process of fabricating. I made so that it will be removable and the rear hatch will still open and close.
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- G-Sergeant Major
- Posts: 173
- Joined: Wed Sep 15, 2004 1:43 am
- Location: London UK
Re: m1114 c partition
would anyone know if an M1114 C-partition would fit into an older M1043 slantback ? I'm guessing as the sponsons are pretty much the same there should not be any issues but before I start wrestling with a big hunk of kevlar maybe someone here may have some clues.
- lkgindy
- G-Lieutenant Colonel
- Posts: 1038
- Joined: Mon Oct 24, 2005 4:27 pm
- Location: Indianapolis, Indiana
Re: m1114 c partition
Hell On Wheels wrote:Here is the back panel Im looking for. It might be a reach but would like to see or try.
What is the purpose of the plates on top of the rear wheel tubs?
Larry
1987 M-998 Project
1995 Hummer HT
1995 Hummer HT
Who is online
Users browsing this forum: No registered users and 59 guests