Oddball short DBEs

Manufacturers, configurations, Shovels, Axe, Wrenches, Oiler, F/E etc.
User avatar
gpw_42
G-Sergeant Major
G-Sergeant Major
Posts: 194
Joined: Sun Nov 22, 2009 6:18 pm

Re: Oddball short DBEs

Post by gpw_42 » Sat Jan 12, 2019 6:32 am

Silly's MB wrote:
Sat Jan 12, 2019 2:26 am
Hi Steve,
I would believe it to be circa 1950's as it is similar to the open ended spanners found in dated tool rolls which bare the forged 'Fairmount' as opposed to the stamped wartime marking.

Definitely a hard to find wrench in the correct size whatever the marking.
Thanks, Cliff, for the quick and definitive feedback. Kinda what I was anticipating when I saw your stamped examples above.

Steve

Len Jones
G-Staff Sergeant
G-Staff Sergeant
Posts: 69
Joined: Sun Jan 24, 2016 8:40 am
Location: South Wales, UK

Re: Oddball short DBEs

Post by Len Jones » Sat Jan 12, 2019 2:40 pm

Cliff I thought you might like to see these ?

FAIRALLOY 9727 SPEC ' AA ' describes this one as a contract special - so my guess is that it might not be listed in period catalogues ?
FAIRALLOY 9725 B
FAIRALLOY 9723

So for comparison I have added the post WW2 FAIRMOUNT USA 5/8'' X 3/4''. I agree that the raised font is similar to the raised font on the nine piece DOE wrench set which I have in a NOS W-51-41-W-982-20 marked canvas roll.
Attachments
Fairmount U.S.A..JPG
Fairmount U.S.A..JPG (136.38 KiB) Viewed 118 times
9727 SPEC,       9725 B, 9723.JPG
9727 SPEC, 9725 B, 9723.JPG (128.07 KiB) Viewed 118 times
P1280045.JPG
P1280045.JPG (130.61 KiB) Viewed 118 times
P1280048.JPG
P1280048.JPG (122.4 KiB) Viewed 118 times
P1280051.JPG
P1280051.JPG (109.4 KiB) Viewed 118 times
Last edited by Len Jones on Sun Jan 13, 2019 10:50 am, edited 2 times in total.
Owner & Custodian of GPW 24043 since 1976.
MVT No 366.

User avatar
Hartofoak
G-Major
G-Major
Posts: 821
Joined: Tue Nov 23, 2010 4:06 pm
Location: Berkshire England

Re: Oddball short DBEs

Post by Hartofoak » Sun Jan 13, 2019 5:35 am

Thanks Len for posting about your fine sets and the info about the "special" Fairmount. So there's now at least three in the UK except my example does not have "Fairalloy" stamped on the reverse. Looks like the special has been stamped with the description whereas the other two have been forged in, again suggesting it was manufactured outside those normally available. Did you just happen to have them lying around or have you been specifically collecting for a GMTK?
MB 298781 DoD: est. 01-19-44 (ex British Army 1958)
T1 Trailer: Transportation Equipment Co.
MVMTS toolboxes & tools

Len Jones
G-Staff Sergeant
G-Staff Sergeant
Posts: 69
Joined: Sun Jan 24, 2016 8:40 am
Location: South Wales, UK

Re: Oddball short DBEs

Post by Len Jones » Sun Jan 13, 2019 10:36 am

Cliff glad you liked them, I have been collecting for a long time now. You know how it starts ? Buy a jeep - buy some tools - then another jeep - then a trailer - then even more tools - fast forward several decades - start a GMTS - then another - the slippery slope - then too many tools :lol:

Digging through my Armstrong's I came upon this one marked ' 15176 ' instead of the usual ' 9723 ', but both have the the same opening sizes :o

The ' 15176 ' is marked ' Chrome-Vanadium ', and the ' 9723 ' is marked ' Hi-Tensile ' ? So if the numbers signify the wrench size why the difference between two identical wrenches ? Or perhaps it is something else ?

Throw into the mix this one ' 15314 ' which is a 1/4 Whit. X 5/16 Whit. marked ' Chromium-Vanadium ', obviously with different opening sizes so not GMTS correct but the number sequence is sort of similar to ' 15176 '. Are Whitworth pieces like this one listed in American catalogues ?

So my best guess is that the ' 15176 ' and the ' 15314 ' were only for export to supply Commonwealth Forces using a different numbering system ? Both of which were U.K. finds.

Thoughts anyone please ?
Thanks Len
Attachments
3-8'' X 7-16''.JPG
3-8'' X 7-16''.JPG (89.86 KiB) Viewed 52 times
9723 & 15176.JPG
9723 & 15176.JPG (90.91 KiB) Viewed 52 times
P1280144.JPG
P1280144.JPG (91.01 KiB) Viewed 52 times
1-4 & 5-16 Whit..JPG
1-4 & 5-16 Whit..JPG (104.81 KiB) Viewed 52 times
15314.JPG
15314.JPG (102.18 KiB) Viewed 52 times
P1280139.JPG
P1280139.JPG (104.76 KiB) Viewed 52 times
Owner & Custodian of GPW 24043 since 1976.
MVT No 366.

Post Reply

Return to “G503 Tools & Equipment ( Vehicle & Pioneer)”

Who is online

Users browsing this forum: airborne-53 and 8 guests