engine rebuild
Posted: Mon Jul 31, 2006 12:06 am
superb pic,s jon .your a engineering genius .welcome to the club of engineer,s 
superb pic,s jon .your a engineering genius .welcome to the club of engineer,s G503 Military Vehicle Message Forums
Powered by Ron Fitzpatrick Jeep Parts
https://forums.g503.com/
Rebuilding the jeep engine
Page 2 of 2
superb pic,s jon .your a engineering genius .welcome to the club of engineer,s Posted: Wed Aug 02, 2006 6:39 am
John, that is exactly my thought! Run Forrest Run saved me the trouble of expressing the concept in good english,so just let me say I wholeheartedly agree with him. Thank you for another great tutorial!run forrest run wrote:Thank you so much. Not only for your expertise, but fore the time and effort you have put into making this invaluable information available without the drama of "this here is my bestselling book".
.
rebuild
Posted: Sat Aug 05, 2006 6:15 pm
THAT SAME CRACK I HAD ON MY GPW<->661 ENGINE I HAD
Posted: Wed Aug 23, 2006 2:29 pm
John,
First let me say thanks. Keep it going.
Second is a question. Where the pins were used on the water jacket crack, is there any way you can elaborate on the process for installing the repair pins? I would really like to learn more about this procedure.
Thanks again,
DA
First let me say thanks. Keep it going.
Second is a question. Where the pins were used on the water jacket crack, is there any way you can elaborate on the process for installing the repair pins? I would really like to learn more about this procedure.
Thanks again,
DA
Engine rebuild part 1
Posted: Tue Dec 18, 2007 4:21 pm
Hi John,
Much appreciate rebuild articles, has given me the confidence to have a go! however, I have come across the same identical crack, as shown in your pic 1b along the top of the water jacket. This being the only damage I am not to sure whether it is necessary to have it repaired as It doesnt seem to be in a place that may result in problems later on. What do you think yourself. could it lead to problems later on?
regards
kevin
Much appreciate rebuild articles, has given me the confidence to have a go! however, I have come across the same identical crack, as shown in your pic 1b along the top of the water jacket. This being the only damage I am not to sure whether it is necessary to have it repaired as It doesnt seem to be in a place that may result in problems later on. What do you think yourself. could it lead to problems later on?
regards
kevin
Re: Rebuilding the jeep engine PART ONE
Posted: Mon Jun 08, 2009 6:02 pm
Hello there,
Can you please tell me where to purchase the Std. sleeves? Going through a re-build at the moment. Great article. Thank you.
Can you please tell me where to purchase the Std. sleeves? Going through a re-build at the moment. Great article. Thank you.
Re: Rebuilding the jeep engine PART ONE
Posted: Wed Jun 10, 2009 9:51 am
Sleeves don't come in sizes...just a sleeve, it is bored out to the piston you want to use...
bored out to standard with new pistons is common...
as far as buying them, the machine shop gets them...never bought any??
john
bored out to standard with new pistons is common...
as far as buying them, the machine shop gets them...never bought any??
john
Re: Rebuilding the jeep engine PART ONE
Posted: Fri Jun 12, 2009 9:51 am
For weld repair info google search "metal stitching" crack repairs. I had my block repaired at the nbr 2,3 exhaust valve seat on my Fhead block.
Many thanks to Mr. Barton for his engine thread it helped me a bunch!!
Many thanks to Mr. Barton for his engine thread it helped me a bunch!!
Re: Rebuilding the jeep engine PART ONE
Posted: Wed Sep 30, 2009 3:51 am
Great work John,
I have a rebuild in my future.
Just a note. On my system some pics did not show up.
Part 1 - Pic after Intro and Pics K,L and M.
Part 2 - 2nd pic
Part 3 - Pics 29 and 30
Might be old links or something with my system.
Have a good day.
I have a rebuild in my future.
Just a note. On my system some pics did not show up.
Part 1 - Pic after Intro and Pics K,L and M.
Part 2 - 2nd pic
Part 3 - Pics 29 and 30
Might be old links or something with my system.
Have a good day.
Re: Rebuilding the jeep engine PART ONE
Posted: Mon Jan 04, 2010 7:32 pm
Rebuilding one right now. Amazing job John! Many thanks!