I've been agonizing over the bolt charf for a few days an I have to make a final change. Here is what is changing and why:
Change bolt 1 and 2 locations and hardware. I believe the TM has some errors in the listing order, that is explained when you look up the lengths of the bolts in the back of the TM. This only became apparent to me when I began assembling my tub and posting data on my site. Here is the rationale:
1. Most everything goes in Order, front to back, left to right, its how draftsmen and engineers work. So bolt No. 1 should be in the front and the rest in order front to back. It makes sense ans all the other bolts 3-6 are in order in the diagram.
2. Some of the hardware is mixed up in the listing, and becomes clear after studying the bolt part numbers and sizes in the rear of the TM and actually installing everything. It becomes clear that the TM is in error.
I have made Bolt No. 1 the front bolt that goes into the frame side from the gusset and into the weld nut. (That is why it needs no other hardware such as PAL nut and nut)
Bolt No. 2 is the long special bolt with the spring that gets 2 special washers per bolt, the nut and PAL nut.
I've added the new files here.