How to repair a MB/GPW fuel gauge. Lots of pics

1941 - 1945, MB, GPW Technical questions and discussions, regarding anything related to the WWII jeep.
User avatar
YLG80
G-Captain
G-Captain
Posts: 763
Joined: Fri Aug 05, 2011 10:45 am
Location: near Namur, Belgium
Contact:

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by YLG80 » Fri Nov 25, 2011 5:20 am

For a complete information on fuel gauge repair, here is a picture of an Early Fuel gauge in restoration.
The general principle is the same, but the 2 coils positions are different.
The picture shows the gauge in a mid position (1/2 full)
early_fuel_gauge-web.JPG
early_fuel_gauge-web.JPG (40.77 KiB) Viewed 3003 times
Yves
Ford GPW 164794 1/4T 12-7-43 - Frame# GPW*239762*
ACM I body#198443
Restored as 1st Army 759th LT B21
ON6YD(ex YB1AUH)

mandrake
G-Private First Class
G-Private First Class
Posts: 8
Joined: Sat Jun 16, 2012 8:30 am
Location: Italy

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by mandrake » Sun Sep 09, 2012 2:24 pm

Hello,
the value between the two connectors is 38 so i think it's ok but the value between the left connector and the brass li is 51...isn't it too much?
Pleas let me know i it's ok or not

User avatar
Akiss
G-Sergeant
G-Sergeant
Posts: 40
Joined: Wed Apr 18, 2012 11:56 am
Location: Athens Greece
Contact:

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by Akiss » Sun Nov 18, 2012 6:38 am

Great post thanx :)

Chuckman84
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 321
Joined: Sun Jun 10, 2012 7:19 pm
Location: Charlotte, NC

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by Chuckman84 » Tue May 28, 2013 5:32 pm

ok, so I tried this, and broke my glass while doing so. anyone know of a vendor who could sell me the glass and the rubber(ish) gasket? Id love to keep this thing vintage and original as can be.

Chuck
83 CJ7 full-bore rock crawler
53 CJ3A farm/hunting rig
45 GPW being restored

JLR
G-Sergeant
G-Sergeant
Posts: 34
Joined: Mon Jan 04, 2010 9:34 am

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by JLR » Wed May 29, 2013 1:25 am

Good morning all,
This is a subject about which several of us (non-electricians) are scratching our heads at this very moment, so your help would be greatly appreciated.
Here in France, we have 6v, 12v and 24v jeeps.
The spare parts Dealers have 6v and 12v dashboard gauges (not 24v), and only one sort of gas-tank transmitter which is supposed to work with all 3 voltages.
The Dealers tell us that gauge and transmitter must be matched.
What is your verdict on the following questions please :-
1- can a gauge marked 6v work properly with a 12v or 24v circuit ?
2- can a gauge marked 12v work properly with a 6 or 24v circuit ?
3- can the tank transmitter work properly with any of 6,12 or 24v circuits ?
4- must the gauge and transmitter be matched ? If so, how is this done ?

Many thanks for your help in solving these "froggy questions" !
John


User avatar
MB1943EB
G-Staff Sergeant
G-Staff Sergeant
Posts: 65
Joined: Thu Aug 22, 2013 4:37 am
Location: Bremen, Germany

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by MB1943EB » Tue Nov 26, 2013 1:48 pm

JLR wrote:Good morning all,
This is a subject about which several of us (non-electricians) are scratching our heads at this very moment, so your help would be greatly appreciated.
Here in France, we have 6v, 12v and 24v jeeps.
The spare parts Dealers have 6v and 12v dashboard gauges (not 24v), and only one sort of gas-tank transmitter which is supposed to work with all 3 voltages.
The Dealers tell us that gauge and transmitter must be matched.
What is your verdict on the following questions please :-
1- can a gauge marked 6v work properly with a 12v or 24v circuit ?
2- can a gauge marked 12v work properly with a 6 or 24v circuit ?
3- can the tank transmitter work properly with any of 6,12 or 24v circuits ?
4- must the gauge and transmitter be matched ? If so, how is this done ?

Many thanks for your help in solving these "froggy questions" !
John
Gidday,

anybody here who could give answers to JLR's interesting questions? I'm most interested in question no. 4.
Would be glad to get some information. Thanks.
Eckhard
_________________________
'I've gone out to look for me. If I should get back before I return, please hold me until I get here.'
(Col. W. Klink, Stalag 13)

parcours
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 439
Joined: Wed Jul 09, 2014 9:04 pm
Location: So. California USA

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by parcours » Tue Jul 21, 2015 5:26 am

EXCELLENT Post.

Bringing it back to life...

Seff
G-Sergeant Major
G-Sergeant Major
Posts: 163
Joined: Tue May 26, 2015 1:00 pm
Location: Denmark

Re: How to repair a MB/GPW fuel gauge. Lots of pics

Post by Seff » Thu Nov 05, 2015 2:43 am

The tank sender unit is a variable resistance. This resistance, if it goes from 0 to x Ohm, should work equally well on 12 V and 6 V. They don't, though. There's always some resistance in them, and they can never cut/"resist" 100% of the voltage.

The gauge should be voltage-specific.

Post Reply

Return to “MB GPW Technical Knowledge Base”

Who is online

Users browsing this forum: conrod6 and 9 guests