WTB: piece of demiled 105mm/106mm barrel
-
- Sergeant Major of the Gee
- Posts: 447
- Joined: Sun Mar 26, 2006 10:40 pm
- Location:
WTB: piece of demiled 105mm/106mm barrel
I need a piece of a demiled 105mm or 106mm barrel for a project that I am working on. It could be from a 105 or 106 recoilless rifle, or a piece of a demiled tank or howitzer barrel. Doesn't really matter. It does need to be a minimum of 3 feet long, and can be as long as 4 or 5 feet. Not real picky on what I get, as I can machine it to make it work. Needs to have rifling in it, so a section of the bore is what I need......no chamber needed. Can be torch cut / doesn't need to be pretty. Please let me know what you have, and where you are located (USA only). Thanks, Marshall
-
- G-Sergeant
- Posts: 38
- Joined: Fri Mar 17, 2006 7:11 pm
- Location: New Mexico
- Contact:
Re: WTB: piece of demiled 105mm/106mm barrel
Hello Marshall, I have a nice long section of a M27 105mm barrel that could work for your project that I would be willing to sell or trade. If I remember correct it was cut off at the bell section.
Thanks
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun
James DeGroat
President
DeGroat Tactical Armaments, LLC.
www.ArmamentSales.com
Specializing in the 7.62mm Minigun
Who is online
Users browsing this forum: No registered users and 8 guests