Could you guys tell me if this had spacers between the bottom of radiator support and frame bracket if so what were they.It is on a WC 52.First picture is frame bracket and second is bottom of radiator support.Thanks
Did this have spacers.
-
- G-Master Sergeant
- Posts: 106
- Joined: Wed Mar 10, 2004 4:53 pm
- Location: southern Oklahoma
- zepher11
- G-Lieutenant General
- Posts: 4365
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Did this have spacers.
I don't see a spacer listed for the radiator support in the SNL. I find that I usually need the radiator support down a little bit lower when aligning the hood from the cowl to the support. It's either that or raise the body a tad.
I recently re-assembled the front end on my WC52 and used no spacers. I think they could be used if it looked like they would be needed to get the correct hood alignment.
I recently re-assembled the front end on my WC52 and used no spacers. I think they could be used if it looked like they would be needed to get the correct hood alignment.
-
- G-Master Sergeant
- Posts: 106
- Joined: Wed Mar 10, 2004 4:53 pm
- Location: southern Oklahoma
Re: Did this have spacers.
Thank you a bunch that is what I needed to know.
Who is online
Users browsing this forum: phillip.w.givens and 40 guests