Allready some time ago for an update of the restoration work, but still busy with the work
I arranged a passagers seat, which is the same as the drivers seat except the under frame.
The drivers frame is adjustable and passagers seat is straight fixed on the floor.
But both are ready now, waiting for install.
Then finaly my radiator is ready.
A complete new cooling bloc, and fixed now on the frame.
Together with the hard to find shroud.
Wil Verhage from the company Jemax parts, has a lot of work to repair my engine
He repaired the cracked engine, and had also work on the hole from the distributer, which was also cracked.
Now the engine get new cilinder tubes, new pistons, valves, valve guides, bearings, distribution chain, etc etc....
Next week I hope to receive it, and make it a working , matching engine again.
So far my spare engine is in the frame for instalation and try outs.
Wil Verhage made pressure tests with water, to see if there are no more leaks.
With my mate Ad, we are every saturday busy with the body work.
We are replacing bad parts of the hull, and do this carefully on locations that are not a problem
with fixing the frame.
When the matching engine is ready and tested, I will strip the frame, and install this in the hull.
Then we will do the repairs with the frame in.
Will be continued