Hub seals for DUKW.
- weasel nut
- G-Colonel
- Posts: 1247
- Joined: Wed Apr 16, 2003 8:49 pm
- Location: Tilton, New Hampshire
- Contact:
Hub seals for DUKW.
I have a July 1945 DUKW.
I am going to do the brakes on all axles. I need some hub seals (which are listed under a different part # than the CCKW). GM 3675092 & GM 3675073 are the DUKW part numbers. Anyone have any sources or a modern equivalent part number. 7-45 build date
Thanks. Bill
I am going to do the brakes on all axles. I need some hub seals (which are listed under a different part # than the CCKW). GM 3675092 & GM 3675073 are the DUKW part numbers. Anyone have any sources or a modern equivalent part number. 7-45 build date
Thanks. Bill
- Attachments
-
- Wolf_my_new_DUKW_1_low_7-5-2018.jpg (89.55 KiB) Viewed 2364 times
42 Chevy 125 Crash Truck from Dow AAFB, 44 Chevy 325 Crash Truck, 42 WC-54, 44 M29C Weasel, 45 CCKW 353 A2 Air-portable, 44 Case VAIW Tug, M-5 HST, 42 M-10 Ammo, Steel & Wood Ben Hur, 43 Sperry AA Searchlight, 41 Wehrmacht Trailer, PE-95G, PE-99B
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Hub seals for DUKW.
I have NOS OEM Rear Inners and possibly NOS Fronts.Will take a look later.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Lieutenant General
- Posts: 5638
- Joined: Thu Dec 03, 2009 5:29 pm
- Location:
Re: Hub seals for DUKW.
Hello Bill,
That is an awesome looking DUKW !!
Looks like it spent its post war years in a garage
My DUKW's spent their postwar years rusting
I grew up in Sanbornton, right next to you , and went to Winnisquam Middle and High School !!
I always liked passing the Union Soldier statue in Tilton on the way to school every day.
Are you going to the WW2 weekend in with the Conway Scenic Railroad later this year ?
I want to bring my GPW up from Florida to attend.
Best Regards,
Ray
That is an awesome looking DUKW !!
Looks like it spent its post war years in a garage
My DUKW's spent their postwar years rusting
I grew up in Sanbornton, right next to you , and went to Winnisquam Middle and High School !!
I always liked passing the Union Soldier statue in Tilton on the way to school every day.
Are you going to the WW2 weekend in with the Conway Scenic Railroad later this year ?
I want to bring my GPW up from Florida to attend.
Best Regards,
Ray
- weasel nut
- G-Colonel
- Posts: 1247
- Joined: Wed Apr 16, 2003 8:49 pm
- Location: Tilton, New Hampshire
- Contact:
Re: Hub seals for DUKW.
Hi Ray,
Was unaware of the Conway RR event. I just looked it up on their website. Might take it in.
Unsure about WWII weekend.
Thanks for the comments.
Bill
Was unaware of the Conway RR event. I just looked it up on their website. Might take it in.
Unsure about WWII weekend.
Thanks for the comments.
Bill
42 Chevy 125 Crash Truck from Dow AAFB, 44 Chevy 325 Crash Truck, 42 WC-54, 44 M29C Weasel, 45 CCKW 353 A2 Air-portable, 44 Case VAIW Tug, M-5 HST, 42 M-10 Ammo, Steel & Wood Ben Hur, 43 Sperry AA Searchlight, 41 Wehrmacht Trailer, PE-95G, PE-99B
-
- G-Lieutenant General
- Posts: 5638
- Joined: Thu Dec 03, 2009 5:29 pm
- Location:
Re: Hub seals for DUKW.
Hello Bill,
Here is a G503 link to the event.
It sounds like a great event to ride the rails with our WW2 vehicles !
viewtopic.php?f=38&t=303368
I too just looked at their website, and the event is not listed, I will check with the original poster of the event.
Best Regards,
Ray
Here is a G503 link to the event.
It sounds like a great event to ride the rails with our WW2 vehicles !
viewtopic.php?f=38&t=303368
I too just looked at their website, and the event is not listed, I will check with the original poster of the event.
Best Regards,
Ray
- weasel nut
- G-Colonel
- Posts: 1247
- Joined: Wed Apr 16, 2003 8:49 pm
- Location: Tilton, New Hampshire
- Contact:
Re: Hub seals for DUKW.
Thanks again Ray.
I am following the other post.
Bill
I am following the other post.
Bill
42 Chevy 125 Crash Truck from Dow AAFB, 44 Chevy 325 Crash Truck, 42 WC-54, 44 M29C Weasel, 45 CCKW 353 A2 Air-portable, 44 Case VAIW Tug, M-5 HST, 42 M-10 Ammo, Steel & Wood Ben Hur, 43 Sperry AA Searchlight, 41 Wehrmacht Trailer, PE-95G, PE-99B
-
- G-Lieutenant Colonel
- Posts: 1002
- Joined: Wed Jan 18, 2012 12:24 pm
- Location: 70 km outside of Melbourne Australia
Re: Hub seals for DUKW.
The reason for different part numbers on hub seals for DUKW and CCKW is that the CCKW uses a leather seal whereas the DUKW is neoprene.
David
David
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Hub seals for DUKW.
Well...not quite, I have Leather rears for DUKW, will check out the fronts If I can. Lips on DUKW Seals are shaped different as they have more water exposure.
OEM Leather in ideal storage is just as good as Neoprene.
OEM Leather in ideal storage is just as good as Neoprene.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Lieutenant Colonel
- Posts: 1002
- Joined: Wed Jan 18, 2012 12:24 pm
- Location: 70 km outside of Melbourne Australia
Re: Hub seals for DUKW.
I have never encountered a leather hub seal for the DUKW and no longer have the SNL for that vehicle.
Does the leather seal have the same part number as the neoprene?
We were at the end of a long supply chain here and there are differences in what was made available.
David
Does the leather seal have the same part number as the neoprene?
We were at the end of a long supply chain here and there are differences in what was made available.
David
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Hub seals for DUKW.
I'll take a look for you first chance I get. I have them on my GMC Shelf. DUKW Front seals are configured for DUKW front Spindles which are different than the front spindles on BANJO GMC.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
Who is online
Users browsing this forum: 65shelby and 55 guests