Hi All,
I'm in need of a good steering bellcrank bracket or an entire front crossmember for a CJ3A. An entire cross member to weld in would be preferred. Any help is appreciated.
Need Bellcrank Bracket or Front Crossmember for CJ3A
-
- G-Private
- Posts: 3
- Joined: Wed Dec 23, 2020 1:12 pm
- Location: Boise, ID
-
- G-Second Lieutenant
- Posts: 503
- Joined: Wed Apr 05, 2006 3:51 am
- Location: Alabama
Re: Need Bellcrank Bracket or Front Crossmember for CJ3A
If nothing materializes here, my go to for original parts is Harry Sheets:
http://www.midwestwillys.com/
http://www.midwestwillys.com/
Rus Curtis
'54 CJ-3B
T3-C
'54 CJ-3B
T3-C
-
- G-Private
- Posts: 3
- Joined: Wed Dec 23, 2020 1:12 pm
- Location: Boise, ID
Re: Need Bellcrank Bracket or Front Crossmember for CJ3A
Does anyone know of any other salvage yards that may have some old Jeep frames laying around that or beyond repair?
-
- G-Second Lieutenant
- Posts: 503
- Joined: Wed Apr 05, 2006 3:51 am
- Location: Alabama
Re: Need Bellcrank Bracket or Front Crossmember for CJ3A
This is a good idea on your part: Spread the net out further.
When I lived in KS, I scanned for possible places. I found a list posted on Rick Grover's website. It's dated but salvage yards don't disappear that often.
I would suggest scanning neighboring states also and if you've got relatives or friends, search those areas too for potential suppliers and , "let your fingers do the walking!" I made a lot of phone calls to eliminate dead ends and scored some really great parts!
http://www.public.asu.edu/~grover/willys/parts.html
Be sure to scroll down and see the link to another list (also dated but still useful) that Rick added from Arturo Garcia.
Good luck!
When I lived in KS, I scanned for possible places. I found a list posted on Rick Grover's website. It's dated but salvage yards don't disappear that often.
I would suggest scanning neighboring states also and if you've got relatives or friends, search those areas too for potential suppliers and , "let your fingers do the walking!" I made a lot of phone calls to eliminate dead ends and scored some really great parts!
http://www.public.asu.edu/~grover/willys/parts.html
Be sure to scroll down and see the link to another list (also dated but still useful) that Rick added from Arturo Garcia.
Good luck!
Rus Curtis
'54 CJ-3B
T3-C
'54 CJ-3B
T3-C
-
- G-Major
- Posts: 860
- Joined: Thu Apr 05, 2007 8:38 am
- Location: NC
Re: Need Bellcrank Bracket or Front Crossmember for CJ3A
Might have what you need. PM Sent.
GPW-712
GPW-713
GPW-713
-
- G-Private
- Posts: 3
- Joined: Wed Dec 23, 2020 1:12 pm
- Location: Boise, ID
Re: Need Bellcrank Bracket or Front Crossmember for CJ3A
I think Stingray has taken care of me. Thanks all for your replies.
Just an FYI, I talked to a gentleman who has a NOS bellcrank mount and is looking into whether or not it will pencil out to manufacture a preproduction mount.
Just an FYI, I talked to a gentleman who has a NOS bellcrank mount and is looking into whether or not it will pencil out to manufacture a preproduction mount.
Who is online
Users browsing this forum: No registered users and 25 guests