CJ-2A front engine plate
- Mark Jennings
- G-Second Lieutenant
- Posts: 535
- Joined: Sat Jun 28, 2003 7:06 am
- Location: Taberg, New York
CJ-2A front engine plate
I am looking for a CJ-2A front engine plate with both mounting tabs facing the rear (like an MB / GPW) but for a gear driven cam shaft. I know they exist because I have see a picture of one.
Thanks in advance.
Mark.
Thanks in advance.
Mark.
Never enough time to do it right but always enough time to do it over.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
- dpcd67
- G-General
- Posts: 11813
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: CJ-2A front engine plate
These are rare; I have one, like new; $150. I'll post a picture so you can see.
U. S. Army 28 years.
Armor Branch
Armor Branch
- Mark Jennings
- G-Second Lieutenant
- Posts: 535
- Joined: Sat Jun 28, 2003 7:06 am
- Location: Taberg, New York
Re: CJ-2A front engine plate
Hello,
Please give me a few days, I ask because my original chain driven GPW engine needs work (block bored, crank ground and a crack in the block fixed) so I bought a civilian gear driven engine. I am taking it apart for rebuild today and if the bore, the crank both look good and there are no cracks in the block I will be using these parts and will most likely pull the trigger on the your engine plate.
I will keep you posted and thank you.
Mark.
Please give me a few days, I ask because my original chain driven GPW engine needs work (block bored, crank ground and a crack in the block fixed) so I bought a civilian gear driven engine. I am taking it apart for rebuild today and if the bore, the crank both look good and there are no cracks in the block I will be using these parts and will most likely pull the trigger on the your engine plate.
I will keep you posted and thank you.
Mark.
Never enough time to do it right but always enough time to do it over.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
- dpcd67
- G-General
- Posts: 11813
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: CJ-2A front engine plate
These were Military parts; intended to put M38 engines into WW2 Jeeps. Got that from Joel. Only one I have ever had.
U. S. Army 28 years.
Armor Branch
Armor Branch
- Mark Jennings
- G-Second Lieutenant
- Posts: 535
- Joined: Sat Jun 28, 2003 7:06 am
- Location: Taberg, New York
Re: CJ-2A front engine plate
Thank you. I took the engine apart today and the bore and crank look good I also do not see any cracks. I will drop it off to the machine shop on Monday and should have a better on the over all condition once it is hot tanked and all the grease and oil is gone.
Thank you.
Mark.
Thank you.
Mark.
Never enough time to do it right but always enough time to do it over.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
"Just name me a hero and I`ll prove he`s a bum". Greg "Pappy" Boyington.
1942 Bantam Trailer
1942 WLA
1943 GPW
1948 Indian Chief
1950 Indian Arrow
1960 Wife.
- dpcd67
- G-General
- Posts: 11813
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: CJ-2A front engine plate
Post war blocks fair better on cracks; I think they are thicker, and for sure, they are made from a better alloy. The NI CR CU on the side indicates that.
U. S. Army 28 years.
Armor Branch
Armor Branch
-
- G-Command Sergeant Major
- Posts: 213
- Joined: Thu Oct 04, 2018 3:14 pm
- Location: Battle Ground, WA
Re: CJ-2A front engine plate
I may have one at home. I picked up four motors. One is an early cj.
-
- G-Command Sergeant Major
- Posts: 213
- Joined: Thu Oct 04, 2018 3:14 pm
- Location: Battle Ground, WA
- dpcd67
- G-General
- Posts: 11813
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: CJ-2A front engine plate
Early CJ2A engines were chain drive and will have the WW2 engine plate. I doubt that any CJ would have the plate the OP is looking for.
U. S. Army 28 years.
Armor Branch
Armor Branch
-
- G-Lieutenant General
- Posts: 4526
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: CJ-2A front engine plate
The front plate on the cj2a engine, gear drive, they are a dime a dozen, the ears point back. They were used for quite a few years till the 3A came out. 2 used ones on the auction site for 50 plus post.
Adam
Adam
-
- G-Second Lieutenant
- Posts: 532
- Joined: Wed Mar 28, 2018 4:22 pm
- Location: USA - East Tennessee
Re: CJ-2A front engine plate
Yep, I have three CJ2A engines right now, all gear drive cam, all with the plate having both feet facing aft.
These CJ2A plates are not rare at all, but Joel knows his stuff and perhaps that is some M38 specific purpose plate and rare for that reason. There may be some difference which identifies it as M38 perhaps the generator mounting differs to accommodate the larger 24 volt unit.
The newer plates with the left side foot facing forward were used beginning with CJ3A / M38 production to accommodate the larger dual action fuel pump.
These CJ2A plates are not rare at all, but Joel knows his stuff and perhaps that is some M38 specific purpose plate and rare for that reason. There may be some difference which identifies it as M38 perhaps the generator mounting differs to accommodate the larger 24 volt unit.
The newer plates with the left side foot facing forward were used beginning with CJ3A / M38 production to accommodate the larger dual action fuel pump.
A.C.Fults
East Tennessee
Shade Tree Mechanic more than 50 years.
None of us are as smart as we pretend to be.
East Tennessee
Shade Tree Mechanic more than 50 years.
None of us are as smart as we pretend to be.
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: CJ-2A front engine plate
Post War Gear Drive CJ-2A thru early CJ-3A used the Plate configured same as the MB. The Civvy Parts manual does not agree with this but I have witnessed very early CJ-3A Jeeps that had the CJ-2A configuration on intact CJ-3A Jeeps that were 3 or 4 years old.The 49 Willys Parts manual is not clear in this. The Gear Drive CJ-2A, early CJ-3A and the 50's Korean War Gear Drive replacement engines used the CJ-2A/early CJ-3A Plate that. PE-95 Gear Drive Replacement engines also had the WWII style front mount set up.
There was a difference, however, that little Stud for the Generator Brace was usually missing, but the hole was there. I fashioned the missing studs with a Bolt, Nut, and a couple lock washers. I have a Late Korean War issue Front Plate removed from a NOS 50's Korean Era Crate Engines and the stud is not installed.
These late CJ-3A Type Gear Drive Replacement engines with early front plate are described on P. 63 NABHOLTZ, Revised. No Generator Stud, just the hole.
There was a difference, however, that little Stud for the Generator Brace was usually missing, but the hole was there. I fashioned the missing studs with a Bolt, Nut, and a couple lock washers. I have a Late Korean War issue Front Plate removed from a NOS 50's Korean Era Crate Engines and the stud is not installed.
These late CJ-3A Type Gear Drive Replacement engines with early front plate are described on P. 63 NABHOLTZ, Revised. No Generator Stud, just the hole.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
Who is online
Users browsing this forum: No registered users and 31 guests