G`day
Just New here.I owner the CJ 3B and looking for old CJ3 b combat Tires and Rims.
But there are hard to find in Australia.Someone told me may be I can useing Land rover`s rims to instead.
Can I put Land rover`s 5 studs rims 6.0x16 to willys??
Cheers
Rims Question
-
- G-Civilian
- Posts: 2
- Joined: Tue Nov 09, 2021 4:58 am
- Location: Australia
- Bill H.
- G Moderator
- Posts: 6256
- Joined: Sun May 31, 1998 8:00 pm
- Location: Yonna Valley, Oregon
Re: Rims Question
A CJ3B would not have combat wheels.
Bill H.
"Each shall seek his own kind, in other words, a bird may love a fish but where would they build a home together?" Tevye, Fiddler on the Roof
1952 Dunbar Kapple M100
1953 Willys M38A1
1962 AMC M422A1
1965 Stevens M416B1 X 2
1967 Kaiser M715
2 Timothy 3:1-5
"Each shall seek his own kind, in other words, a bird may love a fish but where would they build a home together?" Tevye, Fiddler on the Roof
1952 Dunbar Kapple M100
1953 Willys M38A1
1962 AMC M422A1
1965 Stevens M416B1 X 2
1967 Kaiser M715
2 Timothy 3:1-5
-
- G-Second Lieutenant
- Posts: 503
- Joined: Wed Apr 05, 2006 3:51 am
- Location: Alabama
Re: Rims Question
Yes, strictly speaking, "Combat wheels" weren't on a CJ3B. However, the CJ3B shares the wheel dimensions of all the civilian flat fender jeeps. The early standard was 16" x 4.5" (factory tire: 6.00 x 16) where eventually, an option was offered for 15" x 4.5" (factory tire: 7.00 x 15). While I've seen 3B's with 16" wheels, I've noticed more having the optional 15" wheels. I've read that the M606 had an optional 7.00 x 16 tire.
On the two choices of civilian wheels/tires, I believe the overall diameter would have been nearly the same. Later models eventually settled on rims measuring 15" and a bit wider.
IF the stud pattern is the same AND the wheel center hole big enough, then other wheels would certainly fit. The one thing then to watch is offset that may affect turn radius. I don't think there would be an issue fitting over the stock 9" brakes but upgrades to 10" or 11" would need to be checked.
p.s. send your 3B information to Derek Redmond for the CJ3B Page!
http://cj3b.info/
On the two choices of civilian wheels/tires, I believe the overall diameter would have been nearly the same. Later models eventually settled on rims measuring 15" and a bit wider.
IF the stud pattern is the same AND the wheel center hole big enough, then other wheels would certainly fit. The one thing then to watch is offset that may affect turn radius. I don't think there would be an issue fitting over the stock 9" brakes but upgrades to 10" or 11" would need to be checked.
p.s. send your 3B information to Derek Redmond for the CJ3B Page!
http://cj3b.info/
Rus Curtis
'54 CJ-3B
T3-C
'54 CJ-3B
T3-C
- dpcd67
- G-General
- Posts: 11866
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: Rims Question
I have an M606 made by Kaiser with many Mitsubishi parts, (yes they made them under license) and it has the M38 type wheel with the integral bead lock. When we talk about "combat" wheels, we mean, the two piece bolt together wheel, which were not used after WW2.
U. S. Army 28 years.
Armor Branch
Armor Branch
- Joe Friday
- G-Colonel
- Posts: 1230
- Joined: Tue Dec 14, 2010 10:28 am
- Location:
Re: Rims Question
By "integral Bead Lock" do you mean what the Tire and Rim Association calls a "safety hump"?
The original poster said "Combat Tires", not "combat wheels", so he may have simply meant Non Directional Tires?
I don't know if Land Rover wheels fit, I assume not.
Jeep wheels are 5 holes on 5.5 inch bolt circle and 4.25 inch center bore.
The original poster said "Combat Tires", not "combat wheels", so he may have simply meant Non Directional Tires?
I don't know if Land Rover wheels fit, I assume not.
Jeep wheels are 5 holes on 5.5 inch bolt circle and 4.25 inch center bore.
2018 MVPA PIONEER AWARD - MVPA #419
-
- G-Civilian
- Posts: 2
- Joined: Tue Nov 09, 2021 4:58 am
- Location: Australia
Re: Rims Questiong
Thank you very one.
Seems to looking for Willys original’s Rims will be the good choice.
Seems to looking for Willys original’s Rims will be the good choice.
Who is online
Users browsing this forum: No registered users and 32 guests