Who sells this section of harness?

[wc56daveyboy]

I’m looking to replace ONLY the headlight harness
On a 3A

I’m thinking it’s the same for the WW2 jeep as well as the CJ2A/3A

This harness goes from both headlights, includes the 3-prong headlight connector, goes across the grill to the junction (terminal) block on the left fender.

I found only ONE seller, on eBay, located in Europe.


https://www.ebay.com/itm/WILLYS-MB-GPW- ... 3602726506

Hoping to find one here in THE US

So far in my searching on line of the usual suspects I can only find the entire harness, which I do NOT want. I only want this front headlight harness

Anyone know a source in the US?

[Brad Gates]

Howdy,
Try these folks. I have used their civilian harness and all good. They will customize if using different horn location, turn signals, etc. Just give them all your details. Walck's Four Wheel Drive in PA. 610-852-3110
Brad

[Rus Curtis]

When you say all usual suspects, did you check with Vintage Wiring?

https://vintagewiring.com/

I got my harness from them but also got some custom work as well.

[dpcd67]

These are too easy to make, to buy them, for me.

[athawk11]

Walck's make a full wire harness. You can call them and see if they will make just this portion of the harness.

https://walcks4wd.com/Wiring-Harnesses-Parts_c_177.html

[ffbsy]

I have made my own in the past. The wiring on these is so simple and you can’t mess it up. They also sell cloth wrap to keep it looking original if that is what you are after.

[wc56daveyboy]

I forgot all about this tread...

Sorry all.

I ended up making my own, as a good number of you mentioned.

Simple enough as I figured. I guess I was burnt out at that time a d just wanted plug and play.

Eventually I did the entire (basic) harness using a NOS M-series harness as a donor