Bantam T3-C hitch picture
-
- G-General
- Posts: 13414
- Joined: Fri Jan 17, 2003 5:40 pm
- Location: Fort Myers, Florida
Bantam T3-C hitch picture
Could someone post a picture of the hitch portion of the towbar where the Fulton Coupler meets the rest of the landing leg. Just a top and side view will do. Thanks a lot.
Stand for the Flag, Kneel for the Cross
-
- G-Corporal
- Posts: 17
- Joined: Fri Sep 07, 2018 12:06 pm
Re: Bantam T3-C hitch picture
Here's one that's sort of top view and side view at the same time. Hope this helps.

There is a another style with a u shaped strap instead of the casting:


There is a another style with a u shaped strap instead of the casting:
-
- G-General
- Posts: 13414
- Joined: Fri Jan 17, 2003 5:40 pm
- Location: Fort Myers, Florida
Re: Bantam T3-C hitch picture
Excellent picture. Just what I needed to see. Thanks I have the casting but they put on some strapping sides and top for a drop pin set up. Fortunately they re Welded the chain eyes on it so I have everything to put back.I picked up a little later era Fulton hitch here on the Gee but it will be very close.
Stand for the Flag, Kneel for the Cross
-
- G-Corporal
- Posts: 17
- Joined: Fri Sep 07, 2018 12:06 pm
Re: Bantam T3-C hitch picture
Glad to help. There is a thread on this topic on the CJ2A site FYI
https://www.thecj2apage.com/forums/mode ... 10491.html
https://www.thecj2apage.com/forums/mode ... 10491.html
-
- G-General
- Posts: 13414
- Joined: Fri Jan 17, 2003 5:40 pm
- Location: Fort Myers, Florida
Re: Bantam T3-C hitch picture
Here are the bits I removed. Just have to figure out how to make the hitch work as it has a closed bottom and I would not mind a little more length on it


Stand for the Flag, Kneel for the Cross
Who is online
Users browsing this forum: canorisa and 2 guests