Page 2 of 3

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Mon Jun 18, 2012 11:02 am
by Bill H.
Leaf spring shackle bushings:

Suspension Restoration Company (http://www.suspension.com" onclick="window.open(this.href);return false;) part #2121. Cost is $1.50 each. 16 bushings are required. They are made of polyurethane with a durometer of approx. 94 on the A scale. I just installed a set on my Mite. Very easy to install, less than an hour for all, front and back.

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Wed Jul 25, 2012 3:49 pm
by Bill H.
Does anyone have a good number for the axle shaft universal joints? I talked to Ron Alred the other night and he thought they were some odd tractor PTO U-Joint :?

We really need to keep this going and updated.

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Mon Nov 26, 2012 5:59 pm
by markrdje
I have a 151,A2, and I am wondering if they are completely different from a mighty mite(in parts,accessories)I know the engine was completely different
mark

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Sun Mar 31, 2013 5:35 pm
by lawverdict
A carb rebuild kit number and brake master cylinder rebuild number would be appreciated.

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Wed Apr 03, 2013 4:39 pm
by ron alred
No one has been ablt to come up with the correct carb kit any more. I have nos new carbs and master cyls if you are interested. e mail me for prices please
Alredmilitaryvehicles@gmail.com thanks Ron Alred 423 580 0472

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Wed Apr 03, 2013 8:49 pm
by Austringer
The Master Cylinders Ron has are just about perfect.

Jason

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Thu Apr 18, 2013 6:21 pm
by mspeters
Rear Halfshafts - to replace some missing shafts in my parts rig , a spicer long yoke shaft (no pic) and yoke sleeve worked for me. It has longer spline travel, no jacking need to remove. This is a 1.375" splines. shock clearance is tight.

yoke sleeve 2-3-8021KX
yoke shaft 2-82-201X

New Transmission Mounts

Posted: Mon May 20, 2013 8:43 am
by BigBlock
New Replacement Rear Engine/Transmission mounts (2 needed per mite)
UPC: 81106021502
Brand: Anchor
Part number: 2150
Sold at O'Reilly Auto Parts
http://www.oreillyauto.com" onclick="window.open(this.href);return false;
Price $2.50 (That's right, $5 per pair.)
2150.jpg
Rear Mount
2150.jpg (23.44 KiB) Viewed 3455 times
C'mon guys! These are being sold on ebay for $25 - $35 per pair.

New Clutch Plate and Disk

Posted: Mon May 20, 2013 8:59 am
by BigBlock
Clutch Kit: Plate, Disk, Bearing, Tool

The pilot bushing and throw-out bearing sleeve from this kit are not compatible, but the pressure plate, clutch disk, and allignment tool are perfect.
The throwout bearing and sleeve can be separated if you want to use the new bearing with your original sleeve.

Part number: k5317-02 (Also fits lots of early Jeeps - 1945 - 1972)
Cost varies from $90 - $120

Available:
http://www.carpartkings.com/sachs-clutc ... 17-02.html
and
http://www.oreillyauto.com/site/c/detai ... &ppt=C0015
k5317-02.jpg
K5317-02
k5317-02.jpg (14.24 KiB) Viewed 3455 times

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Mon May 20, 2013 2:34 pm
by Jim Sanders
Clearly I need to get the clutch kit to have on hand - since it will fit the Mite or my '46 CJ-2A --and sooner or later one of them will need it.

Re: Some Handy Mighty Mite Info

Posted: Fri Nov 08, 2013 3:08 am
by Benny77
acmack wrote:Anyone have the numbers for rod bearings and mains? Are NOS okay? I was thinking I should do them since I have the motor torn down for a jug swap anyway. David
Does any one know of a mighty mite dealer or mechanic out of Ohio a few years ago? I know the man also had a small museum and restored mighty mites.

Ben

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Fri Nov 08, 2013 3:12 am
by Benny77
ron alred wrote:No one has been ablt to come up with the correct carb kit any more. I have nos new carbs and master cyls if you are interested. e mail me for prices please
Alredmilitaryvehicles@gmail.com thanks Ron Alred 423 580 0472

Does any one know of a mighty mite dealer or mechanic out of Ohio a few years ago? I know the man also had a small museum and restored mighty mites.

Ben

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Fri Nov 08, 2013 5:17 am
by Austringer
Are you talking about Off Road Floater Equipment?

Re: Some Handy Mighty Mite Info (PART NUMBERS)

Posted: Fri Nov 08, 2013 7:23 am
by acmack
Off Road Floater did do Mite motor rebuilds.

David

Re: Mighty Mite Restoration

Posted: Fri Nov 08, 2013 2:45 pm
by Benny77
Brian: I'm Ben. Do you know of a business owner out in Ohio that restores Mighty Mites, and has a small military vehicle museum on the grounds?

I spoke with him a few years ago and I obtained a few years ago when I visited this site.