For Sale 1967 M-151A1 Project & Parts
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
For Sale 1967 M-151A1 Project & Parts
Realizing I have too many projects part 2. Selling this 1967 M-151A1 project.
As best as I can tell it’s uncut. But has major rust issues. I bought this from a friend who bought it but hadn’t been underneath. The outside was skimmed with about 5 gallons of Bondo. I had begun gathering high quality parts to restore it before realizing the body issues are beyond my skills.
I’d like to sell everything as one lot. If by Thanksgiving it hasn’t sold I’ll consider offers on individual parts.
Just about everything in the photos is included in the sale. In the parts cabinet only the Ben Hur trailer parts stay. Otherwise if it’s for a MUTT it goes.
There’s 3 or 4 carbs, one was rebuilt and never run, another is 1967 dated. NOS vacuum wipers, bunch of rubber parts, two rear seat cushions from TNJ Murray, a complete Underbody kit from TNJ Murray, multiple antenna mounts including two “sugar scoops”, windshield glass is good condition, I removed it and stored it inside. Reportedly the engine ran several years ago, but the radiator leaked. 4 new shocks, assorted other small new parts, correct steering wheel. And I’ll throw in a gallon of paint.
Has a Maryland title and data plate to match. Titled as a 62 Willy’s… so I’d recommend doing your own process to get a title but you are welcome to this one.
Asking $6000 OBO for everything or $7000 with the 416 trailer listed previously. No parting out or selling spares separately until/if not sold by Thanksgiving. Located in Ranson, West Virginia.
Dozens of photos are here on my Facebook page: https://www.facebook.com/G518Parts/post ... 1ih48c5S2l
Matt
As best as I can tell it’s uncut. But has major rust issues. I bought this from a friend who bought it but hadn’t been underneath. The outside was skimmed with about 5 gallons of Bondo. I had begun gathering high quality parts to restore it before realizing the body issues are beyond my skills.
I’d like to sell everything as one lot. If by Thanksgiving it hasn’t sold I’ll consider offers on individual parts.
Just about everything in the photos is included in the sale. In the parts cabinet only the Ben Hur trailer parts stay. Otherwise if it’s for a MUTT it goes.
There’s 3 or 4 carbs, one was rebuilt and never run, another is 1967 dated. NOS vacuum wipers, bunch of rubber parts, two rear seat cushions from TNJ Murray, a complete Underbody kit from TNJ Murray, multiple antenna mounts including two “sugar scoops”, windshield glass is good condition, I removed it and stored it inside. Reportedly the engine ran several years ago, but the radiator leaked. 4 new shocks, assorted other small new parts, correct steering wheel. And I’ll throw in a gallon of paint.
Has a Maryland title and data plate to match. Titled as a 62 Willy’s… so I’d recommend doing your own process to get a title but you are welcome to this one.
Asking $6000 OBO for everything or $7000 with the 416 trailer listed previously. No parting out or selling spares separately until/if not sold by Thanksgiving. Located in Ranson, West Virginia.
Dozens of photos are here on my Facebook page: https://www.facebook.com/G518Parts/post ... 1ih48c5S2l
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Bump. Open to offers.
Matt
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
MUTT is still for sale. Open to offers. Parts being sold separate. Willing to do a package deal.
Matt
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- USMC Sergeant
- Posts: 946
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: For Sale 1967 M-151A1 Project & Parts
I never knew they would put ROPS on a M151A1.All the good stuff is not in South Dakota!
change user name to mark
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
I( think that was a modification by the former owner. The rear two legs are only resting on the wheel wells, not mounted to anything.
Matthew
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Bump.
Open to offers on pieces, parts, the whole thing. Most of the replacement parts are listed separately now. I'm willing to accept offers on the truck itself.
Matt
Open to offers on pieces, parts, the whole thing. Most of the replacement parts are listed separately now. I'm willing to accept offers on the truck itself.
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Bump. Taking offers or parting out. I want this gone.
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Most of my spare parts were sold. So the truck itself weighs about 2500 lbs. I'm taking a dollar a pound on it. Whole thing or pieces parts. You come, you pick, you haul. If you don't want the whole thing bring a torch. I don't care. I want it out of my driveway.
Matt
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Here's the NOS or take off parts that remain:
Trying this again. This should be the correct list of what is still available. I'm selling off my M-151A1 project and parts. Prefer pickup in Ranson, WV or at the MVPA convention. But I will ship. Search my previous posts to see pictures of all this stuff. These parts listed are available as well as anything still on the truck. I'm parting it out or open to offers to take the whole thing.
Carburetor Dated 11-70 Used $150.00
Carburetor Dated 6-67 Like New $300.00
Carburetor Dated 2-78 Rebuilt $400.00
Pair Carburetor bodies $50.00
NOS Steering Wheel $75.00
NoS 2 Tab Gas Cap $20.00
Horn button Kit $25.00
NOS Clutch Kit may be missing seals box in poor condition $150.00
NOS Front Shock Pair $100.00
Old Stock Boot Kit (Missing E-brake?) $40.00
NOS Brake Shoes, 12 of them 25 each $300.00
4 Brake drums, rusty but look to be unused $100.00
Starter, untested no bendix $40.00
Starter, untested w/bendix $60.00
Generator, untested $100.00
4 Wiper Blades, NOS 10 each $40.00
Headlight Switch Untested w/o handles $10.00
Front Header Pipe, Unused but some rust $25.00
Front header pipe, used but serviceable $15.00
Horn button $5.00
NOS Plug Wires, Poor condition from storage $25.00
Short Axle Yoke assembly w/U-joint 3 @ 50 each $150.00
Short Axle Yoke w/o U-joint $40.00
Shift Handle w/knob & boot $20.00
Long Axle Shaft, Appears to be a take out $50.00
Pulley, Unknown application P/N 102289 $10.00
NOS Brake Spring Set $20.00
Seat back manual/map pocket $20.00
Underbody Repair Kit straight from TNJ Murray $700.00
Vinyl Side Curtains, crunchy $40.00
Carburetor Air Inlet Hose, Original Take Off $50.00
Radio Base Plate R442 $50.00
Fire Extinguisher & Bracket NOT FOR MUTT $25.00
Tire Chains, set of 4 lots of surface rust, will need some work $50.00
Exhaust manifold, appears unused $50.00
Differential, take off. Condition unknown, does turn $20.00
Front hub $10.00
Transmission cover $5.00
Vinyl Doors, pretty rough price for pair $50.00
Matt
Trying this again. This should be the correct list of what is still available. I'm selling off my M-151A1 project and parts. Prefer pickup in Ranson, WV or at the MVPA convention. But I will ship. Search my previous posts to see pictures of all this stuff. These parts listed are available as well as anything still on the truck. I'm parting it out or open to offers to take the whole thing.
Carburetor Dated 11-70 Used $150.00
Carburetor Dated 6-67 Like New $300.00
Carburetor Dated 2-78 Rebuilt $400.00
Pair Carburetor bodies $50.00
NOS Steering Wheel $75.00
NoS 2 Tab Gas Cap $20.00
Horn button Kit $25.00
NOS Clutch Kit may be missing seals box in poor condition $150.00
NOS Front Shock Pair $100.00
Old Stock Boot Kit (Missing E-brake?) $40.00
NOS Brake Shoes, 12 of them 25 each $300.00
4 Brake drums, rusty but look to be unused $100.00
Starter, untested no bendix $40.00
Starter, untested w/bendix $60.00
Generator, untested $100.00
4 Wiper Blades, NOS 10 each $40.00
Headlight Switch Untested w/o handles $10.00
Front Header Pipe, Unused but some rust $25.00
Front header pipe, used but serviceable $15.00
Horn button $5.00
NOS Plug Wires, Poor condition from storage $25.00
Short Axle Yoke assembly w/U-joint 3 @ 50 each $150.00
Short Axle Yoke w/o U-joint $40.00
Shift Handle w/knob & boot $20.00
Long Axle Shaft, Appears to be a take out $50.00
Pulley, Unknown application P/N 102289 $10.00
NOS Brake Spring Set $20.00
Seat back manual/map pocket $20.00
Underbody Repair Kit straight from TNJ Murray $700.00
Vinyl Side Curtains, crunchy $40.00
Carburetor Air Inlet Hose, Original Take Off $50.00
Radio Base Plate R442 $50.00
Fire Extinguisher & Bracket NOT FOR MUTT $25.00
Tire Chains, set of 4 lots of surface rust, will need some work $50.00
Exhaust manifold, appears unused $50.00
Differential, take off. Condition unknown, does turn $20.00
Front hub $10.00
Transmission cover $5.00
Vinyl Doors, pretty rough price for pair $50.00
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
3/4 of the parts list has been sold. I will update soon. Truck itself is being parted out. Come and take what you want, give me a fair price for it.
Matt
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Parting out the 1967 M151-A1. I've been trying to sell this since last October. So now it gets chopped up and if isn't gone by Labor Day there's a scrap yard 2 miles away.
LOCATION is RANSON, WEST VIRGINIA 25438
Come take what you want and give me a fair price for it. Or come take the whole thing for $1500.
Supposedly it ran before I got it, but it's been sitting for 5 years. Body is not cut, but is severely rusted, there's a spring coming through the rear floor. The ROPS is probably all that's holding it together.
I'll give this a couple of weeks then starting mid-August I'll remove small parts to ship. But for now it's COME AND GET IT.
LOCATION is RANSON, WEST VIRGINIA USA.
If you ask me where the truck is located or where I am located I'm just going to block you. Not even respond. It's in Ranson, West Virginia. I won't ship big parts, but I have a tractor and can help load you or whoever you send to fetch your new treasures.
These parts remain and can be shipped:
Carburetor Dated 11-70 Used $150.00
Carburetor Dated 6-67 Like New $300.00
Carburetor Dated 2-78 Rebuilt $400.00
NoS 2 Tab Gas Cap $20.00
4 Brake drums, rusty but look to be unused $100.00
Starter, untested w/bendix $60.00
Front Header Pipe, Unused but some rust $25.00
Front header pipe, used but serviceable $15.00
NOS Plug Wires, Poor condition from storage $25.00
Short Axle Yoke assembly w/U-joint 3 @ 50 each $150.00
Short Axle Yoke w/o U-joint $40.00
Shift Handle w/knob & boot$20.00
Long Axle Shaft, Appears to be a take out $50.00
Carburetor Air Inlet Hose, Original Take Off $50.00
Radio Base Plate R442 $50.00
Exhaust manifold, appears unused $50.00
Differential, take off. Condition unknown, does turn $20.00
Front hub $10.00
Pictures available. Most easily through email.
Matt
LOCATION is RANSON, WEST VIRGINIA 25438
Come take what you want and give me a fair price for it. Or come take the whole thing for $1500.
Supposedly it ran before I got it, but it's been sitting for 5 years. Body is not cut, but is severely rusted, there's a spring coming through the rear floor. The ROPS is probably all that's holding it together.
I'll give this a couple of weeks then starting mid-August I'll remove small parts to ship. But for now it's COME AND GET IT.
LOCATION is RANSON, WEST VIRGINIA USA.
If you ask me where the truck is located or where I am located I'm just going to block you. Not even respond. It's in Ranson, West Virginia. I won't ship big parts, but I have a tractor and can help load you or whoever you send to fetch your new treasures.
These parts remain and can be shipped:
Carburetor Dated 11-70 Used $150.00
Carburetor Dated 6-67 Like New $300.00
Carburetor Dated 2-78 Rebuilt $400.00
NoS 2 Tab Gas Cap $20.00
4 Brake drums, rusty but look to be unused $100.00
Starter, untested w/bendix $60.00
Front Header Pipe, Unused but some rust $25.00
Front header pipe, used but serviceable $15.00
NOS Plug Wires, Poor condition from storage $25.00
Short Axle Yoke assembly w/U-joint 3 @ 50 each $150.00
Short Axle Yoke w/o U-joint $40.00
Shift Handle w/knob & boot$20.00
Long Axle Shaft, Appears to be a take out $50.00
Carburetor Air Inlet Hose, Original Take Off $50.00
Radio Base Plate R442 $50.00
Exhaust manifold, appears unused $50.00
Differential, take off. Condition unknown, does turn $20.00
Front hub $10.00
Pictures available. Most easily through email.
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
Truck is on hold pending sale of entire vehicle. Individual parts listed are still for sale.
Mat
Mat
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts--SOLD
Truck is SOLD
For those who track prices. $1000
Matt
For those who track prices. $1000
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: For Sale 1967 M-151A1 Project & Parts
do you still have a rebuilt carburator? Is it a zenith?
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
Who is online
Users browsing this forum: No registered users and 46 guests