Nice M151A1 complete turn key Project.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Nice M151A1 complete turn key Project.
I am selling my M151A1 due to life changes and would like to see someone complete my labor of love. I started this project with a " get it up and running" idea which quickly turned into a "do it right" approach. What I have done, I feel it was done right using as many NOS parts as possible, It came with a USMC data plate but I found an army hood number as I sanded down the hood - being ex-army I ran with it. Correct army data plate included: There is the usual rust spots under the battery box (new panel available from D&L Bensinger for $110) and driver and passenger footwells (minor). With very little effort you can have this Mutt up and running. The gas tank has been split open and the rust removed. There are a few pinholes that will have to be welded or patched then the tank can be sealed and welded back together. Includes a PRC77 radio set-up consisting of the sponson/w brace, Mount MT-1029/VRC, and Amplifier power supply /w battery cable AM 2060A/VRC, antenna and tiedown kit. Assorted cables and coax.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
A full set of manuals for the Mutt and radio system.
New wiring harness front and rear installed (M151A2).
A2 style turn signal components.
New motor mounts front and rear.
New windshield seal - was fun to install!
New grade 8 bolts etc.
5 new inner tubes.
New rubber boot set.
New points, condenser, rotor and cap.
Extra wheel rim.
All seats and cushions.
Electrical Test set.
Extra brake shoes (take off)
Lots of new small NOS parts as needed.
All items in the engine bay painted and ready to install.
Fuel pump converted to mechanical style.
Engine ran fine when take out. Valve cove removed and it looked very clean?new.
New valve and side cover gaskets.
All stenciling painted NO vinyl.
EXTRAS:
Spare starter.
XL flack vest.
Axe, shovel, jack and grease gun.
Ammo box first aid kit.
Vietnam used personal transistor radio.
Mermite cooler.
Jerry cans.
USGI shelter half pup tent, poles and stakes.
A very good selection of military tools in period correct tool box.
......And all the other stuff I forgot I had.
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Nice M151A1 complete turn key Project.
Price?
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
As stated $15,000
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: Nice M151A1 complete turn key Project.
Is that a weld in the tool box area? Was it an x cut?
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
It was a Y cut mutt.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
Open to honest offers. Nice winter project.
Motor ran great before I pulled it to replace the motor mounts.
Gladly answer any questions.
Motor ran great before I pulled it to replace the motor mounts.
Gladly answer any questions.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
Happy New Year 2023. Project is still available and open to offers. Get a jump on your summer plans with this easy to complete M151A1 with very little extras needed.
-
- G-Sergeant
- Posts: 37
- Joined: Wed Nov 09, 2016 4:27 am
- Location:
Re: Nice M151A1 complete turn key Project.
Is this 151A1 still available?
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
Had some interest but still for sale as of today. Open to offers.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
No offers yet. Thinking $11,000 will take it.
British Army (Royal Signals). US Army 1st Air Cav (UH1H pilot)
Prime mover 1965 M151A1
Trailer M416
MVPA #37617
Prime mover 1965 M151A1
Trailer M416
MVPA #37617
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
Still some interest but no takers yet. I can remove the radios and non Mutt equipment and just sell the Mutt at a lower price. Open to ALL offers.
What works for you might work for me.
What works for you might work for me.
British Army (Royal Signals). US Army 1st Air Cav (UH1H pilot)
Prime mover 1965 M151A1
Trailer M416
MVPA #37617
Prime mover 1965 M151A1
Trailer M416
MVPA #37617
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
Still available.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
$9500 with radios and gear $8500 for just the M151. Located in Cleveland, GA.
- redcoat54th
- G-First Sergeant
- Posts: 141
- Joined: Sat Sep 15, 2007 7:05 pm
- Location: Cleveland, Georgia.
Re: Nice M151A1 complete turn key Project.
SOLD. Thanks for looking.
Who is online
Users browsing this forum: No registered users and 1 guest