Nice M151A1 complete turn key Project.

1959 - 1978, M151, M151A1, M151A2 jeeps, NO EBAY or COMMERCIAL SALES.
Post Reply
User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Nice M151A1 complete turn key Project.

Post by redcoat54th » Mon Oct 17, 2022 9:01 am

image3 (4).jpeg
image0 (22).jpeg
image1 (15).jpeg
image1 (14).jpeg
$15,000.
I am selling my M151A1 due to life changes and would like to see someone complete my labor of love. I started this project with a " get it up and running" idea which quickly turned into a "do it right" approach. What I have done, I feel it was done right using as many NOS parts as possible, It came with a USMC data plate but I found an army hood number as I sanded down the hood - being ex-army I ran with it. Correct army data plate included:
image3 (5).jpeg
There is the usual rust spots under the battery box (new panel available from D&L Bensinger for $110) and driver and passenger footwells (minor). With very little effort you can have this Mutt up and running. The gas tank has been split open and the rust removed. There are a few pinholes that will have to be welded or patched then the tank can be sealed and welded back together.
image1 (17).jpeg
image0 (23).jpeg
image1 (16).jpeg
image0 (21).jpeg
Includes a PRC77 radio set-up consisting of the sponson/w brace, Mount MT-1029/VRC, and Amplifier power supply /w battery cable AM 2060A/VRC, antenna and tiedown kit. Assorted cables and coax.
image1 (13).jpeg


User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Mon Oct 17, 2022 9:19 am

image0 (20).jpeg
image0 (24).jpeg
image2 (9).jpeg
image2 (11).jpeg
image2 (12).jpeg
Includes:
A full set of manuals for the Mutt and radio system.
New wiring harness front and rear installed (M151A2).
A2 style turn signal components.
New motor mounts front and rear.
New windshield seal - was fun to install!
New grade 8 bolts etc.
5 new inner tubes.
New rubber boot set.
New points, condenser, rotor and cap.
Extra wheel rim.
All seats and cushions.
Electrical Test set.
Extra brake shoes (take off)
Lots of new small NOS parts as needed.
All items in the engine bay painted and ready to install.
Fuel pump converted to mechanical style.
Engine ran fine when take out. Valve cove removed and it looked very clean?new.
New valve and side cover gaskets.
All stenciling painted NO vinyl.
EXTRAS:
Spare starter.
XL flack vest.
Axe, shovel, jack and grease gun.
Ammo box first aid kit.
Vietnam used personal transistor radio.
Mermite cooler.
Jerry cans.
USGI shelter half pup tent, poles and stakes.
A very good selection of military tools in period correct tool box.
......And all the other stuff I forgot I had.

Rickf
G-Lieutenant General
G-Lieutenant General
Posts: 5741
Joined: Sun Mar 19, 2006 12:04 pm
Location: Pemberton, New Jersey

Re: Nice M151A1 complete turn key Project.

Post by Rickf » Mon Oct 17, 2022 12:13 pm

Price?
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone

User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Mon Oct 17, 2022 12:58 pm

As stated $15,000

lpcoating
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 334
Joined: Tue Apr 17, 2012 7:32 pm
Location:

Re: Nice M151A1 complete turn key Project.

Post by lpcoating » Fri Oct 21, 2022 7:04 am

Is that a weld in the tool box area? Was it an x cut?

User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Fri Oct 21, 2022 9:14 am

It was a Y cut mutt.

User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Wed Oct 26, 2022 2:04 pm

Open to honest offers. Nice winter project.

Motor ran great before I pulled it to replace the motor mounts.

Gladly answer any questions.

User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Sat Jan 07, 2023 4:35 pm

Happy New Year 2023. Project is still available and open to offers. Get a jump on your summer plans with this easy to complete M151A1 with very little extras needed.

snipertn
G-Sergeant
G-Sergeant
Posts: 33
Joined: Wed Nov 09, 2016 6:27 am
Location:

Re: Nice M151A1 complete turn key Project.

Post by snipertn » Fri Jan 13, 2023 7:42 am

Is this 151A1 still available?

User avatar
redcoat54th
G-First Sergeant
G-First Sergeant
Posts: 135
Joined: Sat Sep 15, 2007 8:05 pm
Location: Cleveland, Georgia.

Re: Nice M151A1 complete turn key Project.

Post by redcoat54th » Sat Jan 21, 2023 10:39 am

Had some interest but still for sale as of today. Open to offers.


Post Reply

Return to “M151's For Sale”

Who is online

Users browsing this forum: lgr2016 and 3 guests