205 Bearing puller

M274 Mechanical Mule Knowledge Base
Post Reply
Guam0311
G-Master Sergeant
G-Master Sergeant
Posts: 120
Joined: Tue Feb 06, 2018 12:59 pm
Location:

205 Bearing puller

Post by Guam0311 » Sun Apr 22, 2018 5:39 pm

Anyone know what the best or preferred tool for removing the "205" bearing? I have the rear transmission cover off and I have a new bearing so I guess now is the time to change it. The inboard side face of the bearing has rust but otherwise the bearings seems to be fine.


muleman7
G-First Lieutenant
G-First Lieutenant
Posts: 646
Joined: Mon May 14, 2007 5:36 pm
Location: Georgia
Contact:

Re: 205 Bearing puller

Post by muleman7 » Thu May 03, 2018 6:51 am

Depending on the bearing location:
Intermediate Gear with bearing on Gear Shaft use a 3 jaw bearing puller or bearing puller and press off. Bearings in Transmission Cover secure bearing retainer with 2 nuts and drive out bearing with a socket or punch.
Image
Image
Image
Image

Intermediate Gear with bearing in bottom of transmission use a 2 jaw set for inside grip or a blind hole bearing puller.
Image

Try this blind hole bearing puller from Harbor Freight includes the slide hammer
https://www.harborfreight.com/slide-ham ... 62601.html
Three Jaw
https://www.harborfreight.com/3-jaw-pil ... -4876.html
Bearing Puller
https://www.harborfreight.com/large-bea ... -3979.html
Mules are my passion
www.m274armymules.com

Post Reply

Return to “MULE M274 Technical”

Who is online

Users browsing this forum: No registered users and 7 guests