42 GPW "Bella"
-
- G-First Lieutenant
- Posts: 667
- Joined: Sun Jul 29, 2018 4:55 pm
- Location: Someplace in 1944..
Re: 42 GPW "Bella"
Great work!
I have to say that sump being welded to the frame is a first for me! There are some reproductions out there now, most of the originals tend to be swiss cheese
I enjoy seeing the progress, even though I'm putting it back together, looking at your photos brings me back to those awesome memories of taking it apart. Enjoy it!
I have to say that sump being welded to the frame is a first for me! There are some reproductions out there now, most of the originals tend to be swiss cheese
I enjoy seeing the progress, even though I'm putting it back together, looking at your photos brings me back to those awesome memories of taking it apart. Enjoy it!
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
Thanks peep!
So as far as I can tell, the tag on the trans indicates it was rebuilt in North French Africa, but what is "NET"?
So as far as I can tell, the tag on the trans indicates it was rebuilt in North French Africa, but what is "NET"?
3/8, 2nd Marine Division
42 GPW
42 GPW
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
Took my filterette off for cleaning and painting, and a mysterious yellow fluid was leaking out of the back. It seems it was punctured at some point, and the layer of crud underneath had actually prevented it from leaking out untill now. What's inside those things?
3/8, 2nd Marine Division
42 GPW
42 GPW
-
- G-Captain
- Posts: 749
- Joined: Fri Aug 12, 2016 9:30 pm
- Location: teignmouth Devon UK
Re: 42 GPW "Bella"
Be careful of leaking capacitors - don't get any on your skin - PCB's I believe.
Barrie
Barrie
GPW 101005 DOD 3-2-43 20207773 (actual) Louisville
- jeepfinger
- G-Colonel
- Posts: 1587
- Joined: Sun Jan 11, 2009 11:54 am
- Location: Bronte Country West Yorkshire England.
Re: 42 GPW "Bella"
Sorry, I never replied before. I see in your photo now that the oil line has a flex.
Dave
Any chance of any photos? the filterettes are a bit of an Enigma. Could help other GPW onwners with info, like me my GPW's not to far of yours.
Dave
Dave Boocock
GPW 41158 June 19 1942
Bantam T3 9555 1/11/1943 USA 0258448
BSA WDM20 Sept 1940 C4343114
GPW 41158 June 19 1942
Bantam T3 9555 1/11/1943 USA 0258448
BSA WDM20 Sept 1940 C4343114
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
I always forget to take a before picture. She cleaned up quiet nice. I used Quiksteel metal repair epoxy on the hole. Also checked for continuity and everything seems fine.
3/8, 2nd Marine Division
42 GPW
42 GPW
- jeepfinger
- G-Colonel
- Posts: 1587
- Joined: Sun Jan 11, 2009 11:54 am
- Location: Bronte Country West Yorkshire England.
Re: 42 GPW "Bella"
Great,
Thanks alot for posting your photos.
It looks like a friction fit covered version. Barrie, I bet that cover you had, up to of late would have fit. What do you think?
Mav, don't you have the cover? Was there any decals before you cleaned it?
Dave
Thanks alot for posting your photos.
It looks like a friction fit covered version. Barrie, I bet that cover you had, up to of late would have fit. What do you think?
Mav, don't you have the cover? Was there any decals before you cleaned it?
Dave
Dave Boocock
GPW 41158 June 19 1942
Bantam T3 9555 1/11/1943 USA 0258448
BSA WDM20 Sept 1940 C4343114
GPW 41158 June 19 1942
Bantam T3 9555 1/11/1943 USA 0258448
BSA WDM20 Sept 1940 C4343114
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
No cover, no decals, and no markings that I can find.
3/8, 2nd Marine Division
42 GPW
42 GPW
- twinflyer17
- G-Colonel
- Posts: 1347
- Joined: Thu Sep 12, 2013 11:49 am
- Location: Washington, D.C.
Re: 42 GPW "Bella"
Unless you're going to run an original radio, the filterette doesn't need to be hooked up and can be bypassed. I didn't want to risk leaking on my own, so I bypassed it and hid the wires behind it. Food for thought if you have any concerns about it springing a new leak in the future. Apparently a leak can be pretty corrosive to anything it touches.
-
- G-First Lieutenant
- Posts: 667
- Joined: Sun Jul 29, 2018 4:55 pm
- Location: Someplace in 1944..
Re: 42 GPW "Bella"
Yeah that does look like it would have been the friction fit cover, which makes sense. They were used on the first part of the second contract GPWs, I think into late June/early July? [That doesn't mean all will have had them, but that some in that range would have from what I know ]
Anyway it would be a Tobe Deutschmann model, but there aren't very common at all. Probably not the rarest filterette, but one of the hard ones to find for sure. One thing I wanted to try (because why not ) would be to take a trashed Tobe Deutschmann cover made for the single screw, and cut that section out, weld in a plain flat section of sheet metal into the cover where you cut out the raised domed area for the screw, and see how it works as a replacement/stand in for the friction fit cover? The only thing I am not positive on, is how tightly it would fit. I mean the cover you need was tight enough to have a friction fit, not sure if they loosened it a hair for the screw models or not?
Anyway it would be a Tobe Deutschmann model, but there aren't very common at all. Probably not the rarest filterette, but one of the hard ones to find for sure. One thing I wanted to try (because why not ) would be to take a trashed Tobe Deutschmann cover made for the single screw, and cut that section out, weld in a plain flat section of sheet metal into the cover where you cut out the raised domed area for the screw, and see how it works as a replacement/stand in for the friction fit cover? The only thing I am not positive on, is how tightly it would fit. I mean the cover you need was tight enough to have a friction fit, not sure if they loosened it a hair for the screw models or not?
-
- G-Captain
- Posts: 749
- Joined: Fri Aug 12, 2016 9:30 pm
- Location: teignmouth Devon UK
Re: 42 GPW "Bella"
You mean this one Dave -
Barrie
Barrie
GPW 101005 DOD 3-2-43 20207773 (actual) Louisville
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
Cool, if the opportunity ever comes along to snag a cover I'll do it. Until then priority of work is to get the tub back in decent shape, get her running and stopping. Right now Im cleaning up some areas on the frame that need some love while I wait for the front hat channel kit. If all goes to plan, I'll get the old hat channel removed this week and utilize some local expertise in getting the new ones welded in this friday. I also plan on removing the wheels and getting the brakes overhauled. Ive already yanked the old lines and fittings.
3/8, 2nd Marine Division
42 GPW
42 GPW
-
- G-Staff Sergeant
- Posts: 67
- Joined: Mon Sep 03, 2018 11:25 am
- Location: east coast
Re: 42 GPW "Bella"
Some of bubba's lovely handiwork I need to undo. Here goes nothin...
3/8, 2nd Marine Division
42 GPW
42 GPW
-
- G-First Lieutenant
- Posts: 667
- Joined: Sun Jul 29, 2018 4:55 pm
- Location: Someplace in 1944..
-
- G-First Lieutenant
- Posts: 667
- Joined: Sun Jul 29, 2018 4:55 pm
- Location: Someplace in 1944..
Who is online
Users browsing this forum: No registered users and 47 guests