Parts Interchangeability - Ford Pinto
- muttguru
- G-Colonel
- Posts: 1698
- Joined: Fri Jul 18, 2003 11:46 am
- Location: Lil' ol' England
- Contact:
Parts Interchangeability - Ford Pinto
Hello folks,
I'm trying to help an A2 owner overseas who wants to know if a Ford Pinto has similar (or same) parts as an M151-series. He's asking about the radiator and fuel pump.....does anyone have a picture or two of the radiator and the pump, especially a view of the inlet and outlet on the rad.
Any help much appreciated.
Thanks, ken
I'm trying to help an A2 owner overseas who wants to know if a Ford Pinto has similar (or same) parts as an M151-series. He's asking about the radiator and fuel pump.....does anyone have a picture or two of the radiator and the pump, especially a view of the inlet and outlet on the rad.
Any help much appreciated.
Thanks, ken
Contact address - muttguru@aol.com
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
- ltsimp
- G-Sergeant Major
- Posts: 160
- Joined: Sat Dec 04, 2004 7:11 am
- Location: Delaware, Ohio
Re: Parts Interchangeability - Ford Pinto
I replaced my A2 fuel pump with a commonly available one but it wasn’t from a Pinto. For the life of me I can’t remember what it was from. Have you looked at the cross reference list? I’ll try and find my old posts.
-
- Sergeant Major of the Gee
- Posts: 418
- Joined: Wed Oct 23, 2013 6:25 am
- Location: El Dorado, Ar.
Re: Parts Interchangeability - Ford Pinto
I think the part # for the fuel pump is 60577, available from most auto part supplier.
- W. Winget
- LTC, U.S. Army
- Posts: 4446
- Joined: Mon Dec 16, 2002 10:37 am
- Location: USA, Virginia, Carrollton
- Contact:
Re: Parts Interchangeability - Ford Pinto
Ken:
Below is an online photo of a 73 Pinto radiator. Not certain about size dimensions in comparison.
States:
19.75 x 16 x 2"
Seen at Redline360.com
Wasn't the fuel pump from a 66 Falcon the same? Can't recall, it may have been a Dodge dart.
V/R W.Winget
Top inlets on opposite side of below MUTT rad.
Below is an online photo of a 73 Pinto radiator. Not certain about size dimensions in comparison.
States:
19.75 x 16 x 2"
Seen at Redline360.com
Wasn't the fuel pump from a 66 Falcon the same? Can't recall, it may have been a Dodge dart.
V/R W.Winget
Top inlets on opposite side of below MUTT rad.
Looking for 1918 Standard B 'Liberty' truck parts
-
- G-Captain
- Posts: 779
- Joined: Mon Sep 20, 2004 5:52 pm
- Location: Cape Cod
Re: Parts Interchangeability - Ford Pinto
The Omix radiator is Not a 151 radiator.
Incorrect location for lower outlet.
Fil Bonica
Incorrect location for lower outlet.
Fil Bonica
- W. Winget
- LTC, U.S. Army
- Posts: 4446
- Joined: Mon Dec 16, 2002 10:37 am
- Location: USA, Virginia, Carrollton
- Contact:
Re: Parts Interchangeability - Ford Pinto
Oops, let's try this.
Drvrs side top inlet, pass side lower outlet (American orientation here)
WAW
Just opposite of purported Pinto photo.Drvrs side top inlet, pass side lower outlet (American orientation here)
WAW
Looking for 1918 Standard B 'Liberty' truck parts
-
- G-Lieutenant General
- Posts: 5911
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Parts Interchangeability - Ford Pinto
Will, If you go over to the 838 Ken posted the same question over there and one of the guys showed pics of Pintos with radiators in them and the inlet is in the right spot. I seem to remember they were really thin radiators though since they only had to cool a small 4 banger running on the street. And they had to do it on Fords tight budget at that time!
https://g838.org/viewtopic.php?f=3&t=13452
https://g838.org/viewtopic.php?f=3&t=13452
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- muttguru
- G-Colonel
- Posts: 1698
- Joined: Fri Jul 18, 2003 11:46 am
- Location: Lil' ol' England
- Contact:
Re: Parts Interchangeability - Ford Pinto
Hi Rick and Hambone, along with Itsimp and Will W and not forgetting Fil B,
many thanks for the comments and advice.
The "overseas" owner lives in Israel and he has a rough-ish M151A2. As very few of these vehicles ended up in civvie hands, it's almost impossible to find parts for them and he wants to restore what he has to something resembling how it used to look !
I had heard that the Pinto used a radiator that looked very muvh like the M151 rad....... there were also some comments on the G503 board too....and of course Big George in Holland also wrote to me with extra advice.
I've sent the comments to the owner of the A2 so it's now up to him to try whatever may work. I'll let you know how things go.
Kind regards
Ken
many thanks for the comments and advice.
The "overseas" owner lives in Israel and he has a rough-ish M151A2. As very few of these vehicles ended up in civvie hands, it's almost impossible to find parts for them and he wants to restore what he has to something resembling how it used to look !
I had heard that the Pinto used a radiator that looked very muvh like the M151 rad....... there were also some comments on the G503 board too....and of course Big George in Holland also wrote to me with extra advice.
I've sent the comments to the owner of the A2 so it's now up to him to try whatever may work. I'll let you know how things go.
Kind regards
Ken
Contact address - muttguru@aol.com
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Parts Interchangeability - Ford Pinto
Will a Pinto thermostat work on a 151 ?
-
- G-First Lieutenant
- Posts: 608
- Joined: Sun Sep 28, 2003 1:32 am
- Location: spakenburg holland
Re: Parts Interchangeability - Ford Pinto
hi
below the m151 thermostaat
Technical Data | NSN 6685-00-651-9523
Characteristic Specifications
THERMOSTAT TYPE BELLOWS
USAGE DESIGN ENGINE COOLANT FLOW
MOUNTING METHOD FLANGE
OPENING TEMP RATING 177.0 DEG FAHRENHEIT NOMINAL
OPERATING TEMP RATING 202.0 DEG FAHRENHEIT NOMINAL
SPRING OPERATED PRESSURE RELIEF NOT PROVIDED
VALVE TRAVEL DISTANCE 0.500 INCHES NOMINAL
FLOW CONTROL DEVICE BUTTERFLY
LARGEST OUTSIDE DIAMETER 2.490 INCHES NOMINAL
OVERALL HEIGHT 1.571 INCHES NOMINAL
any other one wil work if it fits and have the right temp
george
below the m151 thermostaat
Technical Data | NSN 6685-00-651-9523
Characteristic Specifications
THERMOSTAT TYPE BELLOWS
USAGE DESIGN ENGINE COOLANT FLOW
MOUNTING METHOD FLANGE
OPENING TEMP RATING 177.0 DEG FAHRENHEIT NOMINAL
OPERATING TEMP RATING 202.0 DEG FAHRENHEIT NOMINAL
SPRING OPERATED PRESSURE RELIEF NOT PROVIDED
VALVE TRAVEL DISTANCE 0.500 INCHES NOMINAL
FLOW CONTROL DEVICE BUTTERFLY
LARGEST OUTSIDE DIAMETER 2.490 INCHES NOMINAL
OVERALL HEIGHT 1.571 INCHES NOMINAL
any other one wil work if it fits and have the right temp
george
1976 ? M 151 A2 AMG MUTT lost in acsedent
1978 M 416 A1 ( parkhurst ) trailer
1970 m151 A2 FORD BUDD tub
1957 Volvo sugga radio truck
M 274 mule HOME MADE MULE
1978 M 416 A1 ( parkhurst ) trailer
1970 m151 A2 FORD BUDD tub
1957 Volvo sugga radio truck
M 274 mule HOME MADE MULE
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Parts Interchangeability - Ford Pinto
svramselaar wrote: ↑Mon May 22, 2023 2:15 pmhi
below the m151 thermostaat
Technical Data | NSN 6685-00-651-9523
Characteristic Specifications
THERMOSTAT TYPE BELLOWS
USAGE DESIGN ENGINE COOLANT FLOW
MOUNTING METHOD FLANGE
OPENING TEMP RATING 177.0 DEG FAHRENHEIT NOMINAL
OPERATING TEMP RATING 202.0 DEG FAHRENHEIT NOMINAL
SPRING OPERATED PRESSURE RELIEF NOT PROVIDED
VALVE TRAVEL DISTANCE 0.500 INCHES NOMINAL
FLOW CONTROL DEVICE BUTTERFLY
LARGEST OUTSIDE DIAMETER 2.490 INCHES NOMINAL
OVERALL HEIGHT 1.571 INCHES NOMINAL
any other one wil work if it fits and have the right temp
george
Thank you Sir. I was looking for names and part numbers.
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Parts Interchangeability - Ford Pinto
Thanks Rick. Hope all is well in NJ. I was really wanting name brands and part Numbers for a thermostat. CheersRickf wrote: ↑Tue Sep 27, 2022 10:26 amWill, If you go over to the 838 Ken posted the same question over there and one of the guys showed pics of Pintos with radiators in them and the inlet is in the right spot. I seem to remember they were really thin radiators though since they only had to cool a small 4 banger running on the street. And they had to do it on Fords tight budget at that time!
https://g838.org/viewtopic.php?f=3&t=13452
-
- G-Lieutenant General
- Posts: 5911
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Parts Interchangeability - Ford Pinto
STANT - S370H: STANT - 13078
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Who is online
Users browsing this forum: No registered users and 26 guests