CMD Body Panels for M 151
-
- USMC Sergeant
- Posts: 947
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: CMD Body Panels for M 151
I need 2 but what is the price? I still have to send you a pic of the minor frame rails that went perpendicular from the long rail.My terminology probably needs adjusting.
Thanks for the service,
mark
Thanks for the service,
mark
change user name to mark
-
- USMC Sergeant
- Posts: 947
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: CMD Body Panels for M 151
[img]https://i.postimg.cc/s2YpSwg7/Screen-Sh ... AM.png/img] Clutch rod, don't remember where I bought it THIS GOT SENT TO WRONG SUBJECT SORRY--don't know how to correct it, maybe the moderator can it for me?
change user name to mark
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
Weld fixture for ensuring accuracy on the cowl side panels. The location points for the side panel, top of cowl and front fender top all need to be held. This is a way to make that happen. The slits in the fixture are for welding while clamped down. We also have some aluminum heat sinks coming out of the machine shop for these parts. Finished part will also have the door rod bracket and offsets to match the original design.
Guy
Guy
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
-
- USMC Sergeant
- Posts: 947
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: CMD Body Panels for M 151
Thank you, I'll see if I can dig up some money from somewhere?
change user name to mark
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
The aluminum heat sink is now out of our Machine shop. Not only is this for controlling warpage, it's also a "Go, No-Go" gauge for the forming process and ensures the quality of the part. Part was cut on our water jet, then machined to width and the radii of the bends were duplicated for 100% surface contact.
Guy
Guy
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
As most people are aware, NY has all non-essential manufacturing shut down. As of this past Friday, CMD is under this order by the Governor. We've filed for a variance but are not sure of the outcome yet. For those of you that need parts, hang in there. Full side panels are in our weld shop and we'll start shipping as soon as we can. Stay safe!
Guy
Guy
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
Good morning guys. Just wanted to give everyone an update on body panel shipments. We opened back up with a small crew last Thursday. As most of you are aware, manufacturing in NYS (and many others) is only able to work on "essential" manufacturing. Our understanding of this is that we are not even able to ship a "non-essential" part off of the shelf without being in violation. There are fines associated with this and the government is encouraging whistle-blowers. We've been in contact with our attorneys for clarification on these matters. I've had a lot of people wanting parts but at this time, we can not ship. I have a list and will start processing these orders as soon as we are able. With everything going on, I realize that not being able to ship parts is pretty minor but I wanted to keep everyone informed. Stay safe...
Guy
Guy
- Hell On Wheels
- G-Colonel
- Posts: 1530
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: CMD Body Panels for M 151
this is the kit I need when you reopen
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
Good morning people. Just wanted to let everyone know that we are now able to ship 151 parts again. I have a list of people that have requested parts and will start processing orders. Please keep in mind that this will not happen all at once and I'll get parts moving as soon as I can. We have a lot going on here and as most of you know, this is not a 2 man shop and I have other priorities. I'll be reaching out to those that requested parts with a status update. Thank you for your understanding.
Guy
Guy
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
Re: CMD Body Panels for M 151
Parts update: We've shipped out 8 orders this week and we're working on number 9. Full side panels are back in production. I have a list of people that want them and will contact them in order (oldest inquiry first). Most other parts are in stock but some items getting low. Will also start replenishing those parts. Thanks to all of you who have purchased parts.
Guy
Guy
-
- Sergeant Major of the Gee
- Posts: 385
- Joined: Tue Apr 17, 2012 6:32 pm
- Location:
- Tim Powell
- G-Staff Sergeant
- Posts: 69
- Joined: Thu Aug 30, 2012 1:00 pm
- Location:
Re: CMD Body Panels for M 151
Good to hear you Folks are reopening!!!
Will contact you the first part of next week with a few questions about your parts we need!
Will contact you the first part of next week with a few questions about your parts we need!
Tim Powell
"All that is necessary for the triumph of evil
is that good men do nothing."
"All that is necessary for the triumph of evil
is that good men do nothing."
Who is online
Users browsing this forum: No registered users and 31 guests