Ford GPW 1942

Post your jeep photos, Pre or Post restoration. Bragging Photos etc. Also LIFE jeep photos.
Post Reply
User avatar
lt.luke
G-General
G-General
Posts: 9899
Joined: Fri May 09, 2003 7:56 am
Location: Oklahoma
Contact:

Post by lt.luke » Tue Mar 31, 2009 5:04 am

aamir567 wrote:I restored it in 1990. It took me almost one year to restore.
I am using my Ford GPW 1942 on extreme offroading on its original specs.
So far so good. My Ford GPW compete with all the 4x4's in our club ( Islamabad Jeep Club ) Pakistan.
Its performance is also up to the mark.

Rally organisers some time ask for Mandatory Roll bar & Seat belts.

I think i use it for Offroading events within our club n should not take part in competetions where roll bar is Mandatory.

Aamir Malik
A very wise choice.


User avatar
horrocks
G-Colonel
G-Colonel
Posts: 1810
Joined: Fri Aug 31, 2007 12:34 pm
Location: Ongar, England

Post by horrocks » Tue Mar 31, 2009 5:47 am

Hotchkiss M201s (licence built Willys MBs) were often fitted with a neat rollcage in the French army. I have always felt that if I were to do some serious off-roading, I would use a Hotchkiss. Slightly more expendable! I give a link to my recent story of rolling a Jeep. Its not fun, and rather too easy. I would feel very exposed doing the stuff you show in your photos without a cage and harness of some sort. You will see some photos of M201 rollcages in this thread..... viewtopic.php?t=137314&postdays=0&postorder=asc&start=0
Toby

Willys MB 3/13/42 127415
Willys MB 1/9/45 404620

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Post by aamir567 » Tue Mar 31, 2009 11:13 am

This one is one of by best video so far. It was taken around five years back.
Event was organised by Islamabad Jeep Club ( Pakistan )

Hope u will like this video

Aamir Malik

http://www.youtube.com/watch?v=karouyEP64Y
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Thu Oct 15, 2009 6:44 am

We ( Islamabad Jeep Club ) r planning to arrrange an Obstacle, Hurdle based event in near future. Kindly suggest the point system or any other criteria for judging who is first n second.
It would be highly appreciated if u guide me with a link or video.

Thanx

Aamir Malik
It is always Man behind the wheels.

rejomj
G-First Lieutenant
G-First Lieutenant
Posts: 620
Joined: Wed Sep 17, 2008 10:32 pm
Location: USA

Re: Ford GPW 1942

Post by rejomj » Thu Oct 15, 2009 7:40 am

8/10 WWII Jeeps in India and Pakistan are being used for off roading and only have the original exterior looks. Most of these vehicles don't have original engine but in Aamir's case he has a original engine (Saw it on T-Bhp)

Aamir, Welcome to the G!

You have a great vehicle with even greater history. Unlike you I was not fortunate and I don't have a go devil engine for my ’43 GPW :cry:

Like what people have told you here, if you can avoid using your '42 GPW for off roading please do so(if you have to compromise its originality with roll cage etc). I suppose Kaiser’s are easily available in Pakistan and you can use it to fulfill your OTR desires.

P.S - How is the WWII Jeep parts scene in Pakistan. Are they as hard as in India?

Rejo Jacob
Rejo

Ford GPW 98399 (est - Feb. 18, 1943) est - 20188487

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Fri Oct 16, 2009 6:16 am

We can find parts of Willys & Ford GPW in Pakistan from Junk yard.
New parts r also available but most of them r not original.
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Fri Oct 16, 2009 10:10 am

Dear G members

Need suggestions regarding arranging 4x4 obstacle based Offroading event point system.
Would appreciate if videos or link be posted also

Aamir
It is always Man behind the wheels.

User avatar
johnny43gpw
G-Second Lieutenant
G-Second Lieutenant
Posts: 578
Joined: Sat Dec 10, 2005 11:34 am
Location: Washington State " The Wet Coast"
Contact:

Re: Ford GPW 1942

Post by johnny43gpw » Fri Oct 16, 2009 11:08 am

Hi Aamir,

Just a thought about a roll Bar, If you can get one fabricated, you might try using the 4 Holes in the rear Floor where the Machine Gun Mount Bolt's to the Frame for the center over head and run two Tubes back, to attach to the rear Body and Frame Bolts also in the rear Floor, as far as seat Belts ,I would use the rear Bolt locations in the Front Seat's.

Just my thought's, this Modification would allow you to remove the Roll Bar later if you like, without any Modification to the body or frame to keep the originality of your Jeep.

Have you looked at UTUBE on the Web for any off road video's ???

p.s. Send us a Picture of the Jeep Junkyard you where telling us about!

Take care of that Cool Jeep !!!!

Johnny
1943 GPW #108653
Issue date 4-29-43

"Everything I know, I learned from G.I. Joe" and G503.com !

Cold War Vet:
Combat Medic- 91B
303RD Cav- 19D
104th Inf.- 11B2H
2/146 FA/FO- 13F

http://photobucket.com/albums/e263/johnnyusa/

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Sat Oct 17, 2009 8:46 am

johnny43gpw wrote:Hi Aamir,

Just a thought about a roll Bar, If you can get one fabricated, you might try using the 4 Holes in the rear Floor where the Machine Gun Mount Bolt's to the Frame for the center over head and run two Tubes back, to attach to the rear Body and Frame Bolts also in the rear Floor, as far as seat Belts ,I would use the rear Bolt locations in the Front Seat's.

Just my thought's, this Modification would allow you to remove the Roll Bar later if you like, without any Modification to the body or frame to keep the originality of your Jeep.

Have you looked at UTUBE on the Web for any off road video's ???

p.s. Send us a Picture of the Jeep Junkyard you where telling us about!

Take care of that Cool Jeep !!!!

Johnny
I will consult with my mechanic for the places which u pointed out.
If by any chance u find out any video link or picture do let me know

Thanx

Aamir malik
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Tue Oct 20, 2009 10:29 am

Waiting for expert comments
Thanx
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Mon Oct 26, 2009 8:13 am

aamir567 wrote:
johnny43gpw wrote:Hi Aamir,

Just a thought about a roll Bar, If you can get one fabricated, you might try using the 4 Holes in the rear Floor where the Machine Gun Mount Bolt's to the Frame for the center over head and run two Tubes back, to attach to the rear Body and Frame Bolts also in the rear Floor, as far as seat Belts ,I would use the rear Bolt locations in the Front Seat's.

Just my thought's, this Modification would allow you to remove the Roll Bar later if you like, without any Modification to the body or frame to keep the originality of your Jeep.

Have you looked at UTUBE on the Web for any off road video's ???

p.s. Send us a Picture of the Jeep Junkyard you where telling us about!

Take care of that Cool Jeep !!!!

Johnny
I will consult with my mechanic for the places which u pointed out.
If by any chance u find out any video link or picture do let me know

Thanx

Aamir malik
Me & my mechanic r still confused about the points U mentioned
Can it be possible to show the places on pics

I will be highly obliged
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Sun Aug 22, 2010 11:34 am

Hope u will like these pictures

Image

Image

Image

Image
It is always Man behind the wheels.

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Sun Apr 22, 2012 3:34 am

After uploading this picture on different websites
I am getting comments from friends to have roll cage / Roll Bar & Seat belt for my FORD GPW 1942

I would like to request all G team members to suggest rollcage / Rollbar design etc
Attachments
IMG_1229.JPG
IMG_1229.JPG (85.69 KiB) Viewed 4710 times
It is always Man behind the wheels.

User avatar
Steerman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 465
Joined: Wed Nov 05, 2008 3:17 pm
Location: San Leandro

Re: Ford GPW 1942

Post by Steerman » Tue Apr 24, 2012 4:51 pm

I especially liked the Oakland A's cap on the passenger in the video (they are our home team).
VEP '42 Willys MB 130463
Engine: GPW-6015 s/n MB331114
tub: 33313

'56 CJ5
'49 Willy's panel delivery truck
USNR, 1966-1972, IC2
USS Dixie, AD14, 1968-1970
MVCC Member
MVPA 35292

User avatar
aamir567
G-First Sergeant
G-First Sergeant
Posts: 149
Joined: Sat May 24, 2008 10:02 am
Location: Islamabad Pakistan

Re: Ford GPW 1942

Post by aamir567 » Wed May 09, 2012 11:27 am

Anxiously waiting for comments from senior members of G503 for Roll Cage / Roll Bar & Seat belts
It is always Man behind the wheels.


Post Reply

Return to “- PHOTO GALLERY -”

Who is online

Users browsing this forum: No registered users and 42 guests