Anyone know where i could fine a Mortar Rack for my M1A1 Chemical Mortar Cart?
I have everything else but the rack.
VR
M1A1 Chemical Mortar Cart
-
- G-Private
- Posts: 3
- Joined: Tue Nov 26, 2013 3:31 pm
- Location:
-
- G-Sergeant Major
- Posts: 181
- Joined: Sun Jan 03, 2010 10:17 am
- Location:
Re: M1A1 Chemical Mortar Cart
I could send you the dimensions of the one I have ! Don Shaffer N.E.Ohio
-
- G-Private
- Posts: 3
- Joined: Tue Nov 26, 2013 3:31 pm
- Location:
Re: M1A1 Chemical Mortar Cart
Thanks that would be great.
-
- G-Sergeant Major
- Posts: 181
- Joined: Sun Jan 03, 2010 10:17 am
- Location:
Re: M1A1 Chemical Mortar Cart
Well I made it out to my barn to measure the Barrel tray for the 4.2 inch Mortar. The tray is made out of 1 1/2" by 1 1/2" by1/8" thick angle iron . The tray is 40" long and 9 3/4' wide. There are 4 angle iron legs that are 3 1/2" long with 3/8" locating pins on the bottom. 2 are right at the end and 2 more at 25 1/4" inches in. The Barrel support is made out of 1 by 3/16 inch flat stock 5 1/2" high with a 5" radius in the center . The tray has the flat side of the angle iron up . There are photo's of the tray on the WEB I hope this helps you ! Don Shaffer N.E.Ohio
-
- G-Private
- Posts: 3
- Joined: Tue Nov 26, 2013 3:31 pm
- Location:
Re: M1A1 Chemical Mortar Cart
Thank you so much. I am sure it will.
VR
Charles Barber
VR
Charles Barber
Who is online
Users browsing this forum: No registered users and 34 guests