LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

1950 - 1968, M38, M38A1, M170, Wanted jeeps or parts... list your needs.
Post Reply
381cpdog
G-Private
G-Private
Posts: 4
Joined: Sat Aug 21, 2021 9:39 pm
Location: home

LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by 381cpdog » Tue Feb 08, 2022 5:32 pm

hello fellas,

i am looking for a good schematic for the winch/fairlead for the m38a1/m170 jeeps.

i found the drawing but the measurements were illegible, any measurement in piece parts is great too

even if you know of guy who knows a guy, please pass this along too

i don't need an original, aftermarket will do

thank all for your inputs:):)


CT Trooper
G-Sergeant
G-Sergeant
Posts: 35
Joined: Sun Sep 25, 2011 6:42 pm
Location: Connecticut

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by CT Trooper » Wed Feb 09, 2022 9:27 am

38cpdog,

Please pm me with your email. I have an original winch on my M38A1. I have a drawing I can copy and send to you.

CT Trooper
G-Sergeant
G-Sergeant
Posts: 35
Joined: Sun Sep 25, 2011 6:42 pm
Location: Connecticut

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by CT Trooper » Wed Feb 09, 2022 11:42 am

38cpdog, I sent you a diagram to the email listed in your profile. Hope it has everything you need, otherwise feel free to contact me. Good luck with your project!

parker007
G-Captain
G-Captain
Posts: 712
Joined: Fri Oct 18, 2019 5:35 pm
Location: california

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by parker007 » Wed Feb 09, 2022 2:23 pm

I could use the diagram also.

CT Trooper
G-Sergeant
G-Sergeant
Posts: 35
Joined: Sun Sep 25, 2011 6:42 pm
Location: Connecticut

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by CT Trooper » Wed Feb 09, 2022 3:57 pm

Send me a PM with your email and I will forward you a copy.

381cpdog
G-Private
G-Private
Posts: 4
Joined: Sat Aug 21, 2021 9:39 pm
Location: home

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by 381cpdog » Thu Feb 10, 2022 7:54 pm

hell dale

i got them thank you,

i have attached a few follow on questions for you as=s well when you get the chance to answer, thank you

chasendeer
G-Captain
G-Captain
Posts: 778
Joined: Thu Sep 27, 2012 1:20 pm
Location: Napa,CA

Re: LOOKING FOR RAMSEY WINCH CRADLE/FAIRLEAD OR THE DRAWING OR SCHEMATIC FOR IT

Post by chasendeer » Fri May 06, 2022 9:32 pm

I have an original that needs a little love.
Jay


Post Reply

Return to “M38, M38a1 Wanted”

Who is online

Users browsing this forum: No registered users and 3 guests