24 volt lamp sockets
-
- G-Sergeant
- Posts: 33
- Joined: Wed Feb 13, 2013 9:39 am
- Location:
24 volt lamp sockets
I'm rewiring my brake and blackout lamps. I believe the correct 24V bulbs are 1251 & 1683 but I haven't found anything as to what sockets I need. Any direction will be helpful. Thanks.
-
- G-Major
- Posts: 861
- Joined: Fri Dec 13, 2002 8:26 pm
- Location: LIVERMORE, CALIFORNIA
Re: 24 volt lamp sockets
you can find rebuild kits on eBay...their not to steep.
1951 M38 #22936
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
-
- G-Colonel
- Posts: 1926
- Joined: Mon Oct 16, 2017 1:01 pm
- Location: San Diego, CA
Re: 24 volt lamp sockets
sockets are not voltage specific. Are you missing your sockets?
52 M38 2X, '52 M37, '44 WC51, '42 WC 56/57, '50 CJ-V35(U), '42 GPW, '44 M3A1 Scout Car, 2010 M-Gator
- Sean Bathrick
- Sergeant Major of the Gee
- Posts: 429
- Joined: Tue Mar 04, 2003 8:21 am
- Location: Jamul, CA
Re: 24 volt lamp sockets
I am going thru this myself. I found the rebuild kits for the rear from Midwest Military I believe and the front marker lights from Kaiser Willys. Very straightforward to do. I soaked the inside of the buckets for 2 days in WD40. I only had 1 screw that gave me problems. The bulbs came from Amazon and Ebay. You will need to buy the Douglas shell kit to put on the bullet connectors. About 10 to 15 minutes per bucket.
Sean
43 MB
45 K38
52 M38A1
67 M151
67 M416
43 MB
45 K38
52 M38A1
67 M151
67 M416
Who is online
Users browsing this forum: Google Adsense [Bot] and 38 guests