Hello all,
I found this posting on Craigslist, and I'm wondering if these wheels are used on the M38A1, as well? Also, if this would be a good deal? Please see the link below for the wheels in question. Thanks for any advice.
https://stillwater.craigslist.org/pts/d ... 48142.html
Will these wheels work?
-
- G-Private
- Posts: 4
- Joined: Wed Mar 07, 2018 6:41 am
- Location:
-
- G-Major
- Posts: 861
- Joined: Fri Dec 13, 2002 8:26 pm
- Location: LIVERMORE, CALIFORNIA
Re: Will these wheels work?
there not correct for a m38 or m38a1.
1951 M38 #22936
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
- artificer
- banned
- Posts: 13558
- Joined: Tue Jul 11, 2006 10:46 am
- Location: SINGAPORE
Re: Will these wheels work?
It is a good deal & they will bolt straight on.
John GIBBINS Member Institute of Automotive Mechanical Engineers [Ret], ASE Master Medium/Heavy Truck & Auto Technician USA -2002 Licensed Motor Mech NSW MVIC 49593 Current 2015
TO DIAGNOSE, TROUBLESHOOT OR FAULT FIND ANY AUTO SYSTEM....
Understand how system parts interact with one another. GOOD parts can then be established & the NOT GOOD problem/s part/s isolated for repair or replacement.
TO DIAGNOSE, TROUBLESHOOT OR FAULT FIND ANY AUTO SYSTEM....
Understand how system parts interact with one another. GOOD parts can then be established & the NOT GOOD problem/s part/s isolated for repair or replacement.
-
- G-Private
- Posts: 4
- Joined: Wed Mar 07, 2018 6:41 am
- Location:
Re: Will these wheels work?
Thanks for the feedback. I'd like to find the correct style for an M38A1.
From the information I've gathered I will need the following:
Ordnance number...7387807
Type...std drop-center
Rim size...4.50 x 16.00
Stud circle diameter...5.496 x 5.504
Do the original type M38A1 wheels have the 1/8" hole by one of the lug holes?
From the information I've gathered I will need the following:
Ordnance number...7387807
Type...std drop-center
Rim size...4.50 x 16.00
Stud circle diameter...5.496 x 5.504
Do the original type M38A1 wheels have the 1/8" hole by one of the lug holes?
-
- G-Major
- Posts: 861
- Joined: Fri Dec 13, 2002 8:26 pm
- Location: LIVERMORE, CALIFORNIA
Re: Will these wheels work?
http://www.willysmjeeps.com/v2/modules. ... oad&cid=51
from the willysmjeeps board downloads....you should check it out for all things m38 & m38a1
from the willysmjeeps board downloads....you should check it out for all things m38 & m38a1
1951 M38 #22936
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
1951 M100 DUNBAR
1953 M100 DUNBAR
M416B1
2- M762
MVPA #11788
MVCC
-
- G-Private
- Posts: 4
- Joined: Wed Mar 07, 2018 6:41 am
- Location:
Re: Will these wheels work?
Thanks Ken!
Who is online
Users browsing this forum: No registered users and 48 guests