My distributor has a lot of play in the shaft, so much so that I can open and close points my just rocking the shaft. I can't seem to find the collar/bushing/bearing for repair. All I see for "distributor repair kit" are the points, condenser, etc and nothing about what I need. Looking for a place to order what I need, any suggestions?
Scott
Distributor problem
-
- Sergeant Major of the Gee
- Posts: 424
- Joined: Sun Sep 28, 2003 8:04 pm
- Location: Tijeras, NM
- Contact:
-
- G-Private First Class
- Posts: 12
- Joined: Sat Jan 12, 2013 11:37 am
- Location:
Re: Distributor problem
go to willys distributors on the net kurt rebuilds them and sells parts
-
- G-Lieutenant General
- Posts: 4513
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: Distributor problem
Which distributor is in there?
Distributor absorbent bronze bushing -A1681 from Ron
pull it apart, is it really the shaft and bearings? check the shaft sometimes that is worn and will need a new shaft or bearing relocation.
Adam
Distributor absorbent bronze bushing -A1681 from Ron
pull it apart, is it really the shaft and bearings? check the shaft sometimes that is worn and will need a new shaft or bearing relocation.
Adam
-
- Sergeant Major of the Gee
- Posts: 424
- Joined: Sun Sep 28, 2003 8:04 pm
- Location: Tijeras, NM
- Contact:
Re: Distributor problem
It's the standard waterproof Autolite 24V M38 distributor. I will try willysdistributors.com and see if I can get lucky.
Who is online
Users browsing this forum: No registered users and 13 guests