I need to replace the front brake wheel cylinders on my White M3A1 Scout Car. I bought two new wheel cylinders through NAPA, part number 4571. I got this number from a post here on the G503. Everything lines up except the pistons need to be the reverse pin type. Does anyone have a correct wheel cylinder rebuild kit number with the correct pistons?
It appears that part number FD-613 will work, but at $118 each there must be another solution. When I use that number on some of the commercial part websites, it brings me back to 4571.
Thanks in advance. Paul
M3A1 Front Wheel Cylinders
-
- G-Captain
- Posts: 739
- Joined: Wed Sep 29, 2004 5:12 am
- Location: Texas
M3A1 Front Wheel Cylinders
1944 WC51
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: M3A1 Front Wheel Cylinders
Paul,
FD-613 is just the Casting Number. You need F-1430 Cylinder Assy., they are both for the Front on G-067 Scout Car and the Front for the Split Axle CCKW.
Trust Me.
FD-613 is just the Casting Number. You need F-1430 Cylinder Assy., they are both for the Front on G-067 Scout Car and the Front for the Split Axle CCKW.
Trust Me.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Corporal
- Posts: 26
- Joined: Sun Sep 28, 2014 11:31 am
- Location:
Re: M3A1 Front Wheel Cylinders
Send me your original wheel cylinders, I can rebuild them, also if you have a master or a hydrovac that needs to be rebuilt send it down to me, we can rebuild all of them
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: M3A1 Front Wheel Cylinders
F-1430 has the correct pistons. Let me know if you can't get the F-1430.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Captain
- Posts: 739
- Joined: Wed Sep 29, 2004 5:12 am
- Location: Texas
Re: M3A1 Front Wheel Cylinders
Okay I'm good to go. Thanks Joel!!!
1944 WC51
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
Who is online
Users browsing this forum: No registered users and 43 guests