Valve Position Plate
- Grummanflyer
- G-Sergeant Major
- Posts: 183
- Joined: Sun Oct 15, 2017 6:06 am
- Location: Hills of Ky.
- Contact:
Valve Position Plate
Has anybody here got a Brunswick with the original valve position plate on it? I think mine may be a forgery.
Thanks
GF
Thanks
GF
I have guns.
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
-
- USMC Sergeant
- Posts: 946
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: Valve Position Plate
I don't know what you are talking about, probably a 4 cylinder? I have an A5 mule so that's probably different?
change user name to mark
- Grummanflyer
- G-Sergeant Major
- Posts: 183
- Joined: Sun Oct 15, 2017 6:06 am
- Location: Hills of Ky.
- Contact:
Re: Valve Position Plate
Its a 2 cyl A5 made by Brunswick according to the numbers. I would like to see a picture of an original valve location data plate to see if it has a plate ID number in the corner.
Gf
Gf
I have guns.
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
-
- USMC Sergeant
- Posts: 946
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: Valve Position Plate
My mule is made by Baifield Industries.I edited this so it is correct(mark)
Last edited by markrdje on Wed Jan 03, 2018 10:37 pm, edited 4 times in total.
change user name to mark
-
- G-Lieutenant General
- Posts: 5820
- Joined: Wed Dec 18, 2002 11:00 am
- Location:
Re: Valve Position Plate
Mark, check your plate again, your mule was built by Baifield Industries - EMTEX Division.
As far as the valve plate, give John Emery a call, he has examples of every plate ever made for the mule and is making very accurate reproductions of most of them.
Maybe this will help, bad photo, but the valve plate is the middle one on the top.
As far as the valve plate, give John Emery a call, he has examples of every plate ever made for the mule and is making very accurate reproductions of most of them.
Maybe this will help, bad photo, but the valve plate is the middle one on the top.
-
- USMC Sergeant
- Posts: 946
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: Valve Position Plate
Chuck, you are right sorry for saying something wrong
change user name to mark
- Grummanflyer
- G-Sergeant Major
- Posts: 183
- Joined: Sun Oct 15, 2017 6:06 am
- Location: Hills of Ky.
- Contact:
Re: Valve Position Plate
Chuck, I was talking to John Emery yesterday about the correct data plates for my mule and he asked me if the valve position plate had a part number in the lower corner. He said he was trying to make some reproductions and his sample plate had been hit with a grinder in the corner and he couldn't read the number. Mine doesn't have a number in the corner at all so it's probably a fake. I told him I would ask on this board and that hopefully somebody had a machine with an original tag so he could finish the artwork for the ones he is making. All he needs is the part number of the actual tag itself.
GF
GF
I have guns.
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
-
- G-Staff Sergeant
- Posts: 68
- Joined: Sun Jul 20, 2014 5:49 pm
- Location: Will County, Illinois
-
- G-Lieutenant General
- Posts: 5820
- Joined: Wed Dec 18, 2002 11:00 am
- Location:
Re: Valve Position Plate
10-4. If it was not so cold, I'd walk up to the shop and look at mine. Also have a friend with a very late Brunswick Corp A5 that I know is all original and will look at it. Will let you know what I find and you can report back to John.
-
- G-First Lieutenant
- Posts: 646
- Joined: Mon May 14, 2007 5:36 pm
- Location: Georgia
- Contact:
Re: Valve Position Plate
I checked 3 A5 mules 2 are Automatic Sprinkler Corp Baifield Div. the other is Baifield Industries Emtex Div.
All 3 Engine Valve Positions Plates are Aluminum Colored with Black Printing and NO contract number.
All 3 Engine Valve Positions Plates are Aluminum Colored with Black Printing and NO contract number.
Mules are my passion
www.m274armymules.com
www.m274armymules.com
- Grummanflyer
- G-Sergeant Major
- Posts: 183
- Joined: Sun Oct 15, 2017 6:06 am
- Location: Hills of Ky.
- Contact:
Re: Valve Position Plate
Yes they should be Aluminum with black lettering according to John. I have not seen any valve position plates with the contract number but Emery says there should be one in the bottom right hand corner. He says he has one but somebody damaged it with a grinder and he does not have the complete number for his reproductions. Maybe Chuck can find a number or somebody will come up with one.
I have guns.
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
-
- G-First Sergeant
- Posts: 126
- Joined: Tue Apr 29, 2014 10:54 am
- Location:
Re: Valve Position Plate
I have heard of this plate, but never seen one. Where should it be located?
Cold here in WNY, -1 ( without wind chill ) at the moment, and the temp is supposed to drop all night. Going to have to fire up the chain saw and haul wood with the Mule this weekend.
JBP
Cold here in WNY, -1 ( without wind chill ) at the moment, and the temp is supposed to drop all night. Going to have to fire up the chain saw and haul wood with the Mule this weekend.
JBP
JBP
Rush, NY
Small Military Fleet, only one lonely A2 Mule,
But several other antiques, including me!
Rush, NY
Small Military Fleet, only one lonely A2 Mule,
But several other antiques, including me!
-
- USMC Sergeant
- Posts: 946
- Joined: Sat Jun 13, 2009 12:44 pm
- Location:
Re: Valve Position Plate
It on the front middle edge of the mule, right by the handle
change user name to mark
-
- G-First Sergeant
- Posts: 126
- Joined: Tue Apr 29, 2014 10:54 am
- Location:
Re: Valve Position Plate
Okay, I'll check, that spot, I don't recall any holes there where it was in days gone by.
.
.
JBP
Rush, NY
Small Military Fleet, only one lonely A2 Mule,
But several other antiques, including me!
Rush, NY
Small Military Fleet, only one lonely A2 Mule,
But several other antiques, including me!
- Grummanflyer
- G-Sergeant Major
- Posts: 183
- Joined: Sun Oct 15, 2017 6:06 am
- Location: Hills of Ky.
- Contact:
Re: Valve Position Plate
Cold here too man. My dog has been stuck to a tree in the front yard for two days.LifeLongWNYer wrote: ↑Thu Jan 04, 2018 4:11 pmI have heard of this plate, but never seen one. Where should it be located?
Cold here in WNY, -1 ( without wind chill ) at the moment, and the temp is supposed to drop all night. Going to have to fire up the chain saw and haul wood with the Mule this weekend.
JBP
I have guns.
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
You don't want me to have guns.
I won't give you my guns.
YOUR MOVE!
Who is online
Users browsing this forum: No registered users and 29 guests