I have a very nice 1990 M998 Helmet Top Hmmwv for sale,
I have owned for a couple of years, clear oregon Title as a AM General Hmmwv, not an AMC Renegade or anything like that.
It has 1 year old Carc 383 green paint, airlift bumper with reverse lights/license plate light. New highback seats with covers, professionally sprayed in bedliner on the whole inside, Suplemental armor doors (not original Armor, but I do have some front door armor if you want to pay extra)are totally stripped, primed painted with new seals, new glow plugs with S3 smart box, new main and engine wiring harness and ground wires, new front drive axles, runs, steers, stops great. Goes down the road at 55 pretty well.
I am asking 27,500, I do not think a person could replicate for that price.
Listed on Salem Or. craigslist Photos can be seen there.
Arthur Porter
Five0Three 3Three0 Three9Seven8
Arthur 26 m pilot At msn dot com
First person to show up with cash/check, pennies, gold, ???
1990 M998 Helmet top F/S
Moderator: Kurt Lesser
-
- G-Corporal
- Posts: 22
- Joined: Sat Jul 12, 2008 7:36 pm
- Location: Oregon
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
Re: 1990 M998 Helmet top F/S
Why did you stop the bedliner halfway past the shifter and not to the doghouse? Where is the trailer hitch plug? Any wiper issues? The wires are mixed up.
Jason
Jason
-
- G-Corporal
- Posts: 22
- Joined: Sat Jul 12, 2008 7:36 pm
- Location: Oregon
Re: 1990 M998 Helmet top F/S
Hi Jason,
I had a local company spray it, and they did a pretty good job,
But they are use to doing pickup beds, with customer instructions, I guess they were confused, it's going back in to get that remedied this week.
And I guess I dont know what you are talking about with the windshield wipers, they work, wiring switches? Is there something that you see from a picture, I dont with it in the driveway.
Thank you very much for the interest.
Arthur
I had a local company spray it, and they did a pretty good job,
But they are use to doing pickup beds, with customer instructions, I guess they were confused, it's going back in to get that remedied this week.
And I guess I dont know what you are talking about with the windshield wipers, they work, wiring switches? Is there something that you see from a picture, I dont with it in the driveway.
Thank you very much for the interest.
Arthur
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
Re: 1990 M998 Helmet top F/S
I meant that the wipers are on the wrong side. It looks like the left one is in your way while driving. They should stop to the other side. I have heard that this can be fixed by moving the linkage inside the w/s frame.
Jason
.
Jason
.
- Hell On Wheels
- G-Colonel
- Posts: 1529
- Joined: Fri May 04, 2007 1:19 pm
- Location: San Antonio, TX
- Contact:
Re: 1990 M998 Helmet top F/S
Jason,
That second picture you posted is that a mod for the washer hose? I need to do that to my rig. extend the hoses and remount.
That second picture you posted is that a mod for the washer hose? I need to do that to my rig. extend the hoses and remount.
Robert
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
1966 - M151A1
1986 - M998
2007 - M1102
2009 - H3T
Hell on Wheels https://www.youtube.com/channel/UCi_blL ... z7Ukw8gbHg
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
Re: 1990 M998 Helmet top F/S
That was done because of that armor plate at the bottom of the windshield. They had to move the nozzles up.Hell On Wheels wrote: ↑Mon Apr 30, 2018 4:50 pmJason,
That second picture you posted is that a mod for the washer hose? I need to do that to my rig. extend the hoses and remount.
That was just the first pic I found with the wipers at the correct PARK spot.
Jason
- Retired War Horses
- G-Brigadier General
- Posts: 2445
- Joined: Sun Jan 11, 2004 9:45 am
- Location: Northern Calif
- Contact:
Re: 1990 M998 Helmet top F/S
Hell On Wheels wrote: ↑Mon Apr 30, 2018 4:50 pmJason,
That second picture you posted is that a mod for the washer hose? I need to do that to my rig. extend the hoses and remount.
ThAts how they are done on the m1151’s
Retired War Horses Restoration
Call us for all your HMMWV parts, service, upgrades and conversion needs.
Call us for all your HMMWV parts, service, upgrades and conversion needs.
Who is online
Users browsing this forum: No registered users and 42 guests