Does anyone have a diagram of the parking brake on the 1/2 ton WC?
Am putting the brake together and not sure of how all the parts go together - especially
the side opposite the handle. Is there a bolt and nut that goes into the bracket on that side?
Thanks for any help
Parking brake diagram - wtk
-
- G-Corporal
- Posts: 26
- Joined: Wed Apr 20, 2016 11:10 am
- Location:
- zepher11
- G-Lieutenant General
- Posts: 4357
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Parking brake diagram - wtk
Top photo is out of the manual for a Dodge WC half-ton:
This is a photo out of the manual for a Dodge WC 3/4 ton:
This is a photo out of the manual for a Dodge WC 3/4 ton:
-
- G-Corporal
- Posts: 26
- Joined: Wed Apr 20, 2016 11:10 am
- Location:
Re: Parking brake diagram - wtk
Thanks Zeph!
Would you know what holds the hand brake anchor clip screw in place?
I see that there is a spring but what does the screw thread into?
Thanks
Would you know what holds the hand brake anchor clip screw in place?
I see that there is a spring but what does the screw thread into?
Thanks
- dpcd67
- G-General
- Posts: 11813
- Joined: Mon Jul 25, 2011 3:41 pm
- Location: Iowa
Re: Parking brake diagram - wtk
It threads into the extension off the transfer case. Actually, it is the support, that houses the output bearing, PN CC-927338. (From my WC63 SNL but the principle is the same).
Look in your TMS and SNL and you will see how it works. The screw is wired into place as it can't be actually tightened.
Look in your TMS and SNL and you will see how it works. The screw is wired into place as it can't be actually tightened.
U. S. Army 28 years.
Armor Branch
Armor Branch
-
- G-Corporal
- Posts: 26
- Joined: Wed Apr 20, 2016 11:10 am
- Location:
Re: Parking brake diagram - wtk
Thanks dpcd67,
I see how it threads in to the extension bracket now - there wasn't any screw on mine and it was
just being held on by the springs and bolts on the other side.
Thanks
I see how it threads in to the extension bracket now - there wasn't any screw on mine and it was
just being held on by the springs and bolts on the other side.
Thanks
Who is online
Users browsing this forum: No registered users and 63 guests