Dodge 1/2 Ton WC Throttle Linkage
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Dodge 1/2 Ton WC Throttle Linkage
I think the salad on my engine carburetor/throttle linkage is not proper. Could someone be so kind as to post a few clear pics of the proper linkage parts required to go from the passenger side cross shaft through the bell cranks on the manifold up to the carburetor. Here is what I had on mine and nothing appears correct except the plate that screws to the manifold.
Thanks
Thanks
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
Here is an image of the various bell crank parts that I have, along with the hrottle Cable Housing Clamp Bracket. VPW does have that bracket, but no other bell cranks that mount on the bracket. I will also need to fab the rod that goes from the linkage to the throttle.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Command Sergeant Major
- Posts: 229
- Joined: Mon Nov 29, 2010 7:00 am
- Location: Hereford,U.K.
Re: Dodge 1/2 Ton WC Throttle Linkage
Hi Oz,
I'm going to check what i have as I've got a few parts ,and I'm not sure whats correct either..
will post some pics later.
I'm going to check what i have as I've got a few parts ,and I'm not sure whats correct either..
will post some pics later.
94 locating Regt RA,57 Bty B troop 1982-1985.
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
-
- G-Command Sergeant Major
- Posts: 229
- Joined: Mon Nov 29, 2010 7:00 am
- Location: Hereford,U.K.
Re: Dodge 1/2 Ton WC Throttle Linkage
Hi Oz,
i just checked through some pictures i took of another Dodge for reference .
i just checked through some pictures i took of another Dodge for reference .
94 locating Regt RA,57 Bty B troop 1982-1985.
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
-
- G-Command Sergeant Major
- Posts: 229
- Joined: Mon Nov 29, 2010 7:00 am
- Location: Hereford,U.K.
Re: Dodge 1/2 Ton WC Throttle Linkage
Hi Oz,
Heres what I've got on 2 of the manifolds i have,I'm not sure which i should use ? also the armature that goes over the bell housing i have 2 different types ? Heres the Accelerator linkages i have.
Heres what I've got on 2 of the manifolds i have,I'm not sure which i should use ? also the armature that goes over the bell housing i have 2 different types ? Heres the Accelerator linkages i have.
94 locating Regt RA,57 Bty B troop 1982-1985.
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
Excellent. Thanks very much. That is the most clear image yet. I have not determined the correct orientation of the governor. I have it installed as this image shows, but VPW said it should be turned the other way. The image I posted on my thread seems to show it 180 out from the pic you posted. Thanks for posting this as it will help me to sort out the correct linkage parts.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
I wonder if there is a late war and early war version different for the 1/2 ton and 3/4 ton. They look close, but I do see the differences. Since I have a replacement engine T214, i am not sure which is correct eitherBATMOBILE1 wrote: ↑Sun Mar 18, 2018 9:39 amHi Oz,
Heres what I've got on 2 of the manifolds i have,I'm not sure which i should use ? also the armature that goes over the bell housing i have 2 different types ?
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Command Sergeant Major
- Posts: 229
- Joined: Mon Nov 29, 2010 7:00 am
- Location: Hereford,U.K.
Re: Dodge 1/2 Ton WC Throttle Linkage
Hi Oz,
Glad my pictures helped.i must have taken some pictures of the spares truck i took the engine out of,if i have it should show the carb connections..
If i find anything else i will post pictures.
Your doing a great job,and what your doing now i will be doing in a while too,so it will help me as well..
Cheers.
Paul.
Glad my pictures helped.i must have taken some pictures of the spares truck i took the engine out of,if i have it should show the carb connections..
If i find anything else i will post pictures.
Your doing a great job,and what your doing now i will be doing in a while too,so it will help me as well..
Cheers.
Paul.
94 locating Regt RA,57 Bty B troop 1982-1985.
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
Finally got around to making a linkage from the manifold bell crank to the throttle. The bell crank is from an M37 according to VPW, and a close match, if not functional.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- G-Command Sergeant Major
- Posts: 229
- Joined: Mon Nov 29, 2010 7:00 am
- Location: Hereford,U.K.
Re: Dodge 1/2 Ton WC Throttle Linkage
Looking good Oz,your almost thereto spent the last week working on cleaning all my manifold parts and throttle linkages ,so when i get to where you are now i have a few options, still not sure what to use.got a decent high rise inlet manifold from John at Midwest.will need to get the inlet and exhaust machined as they are quite a way out.
94 locating Regt RA,57 Bty B troop 1982-1985.
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
32 Heavy Regt RA,57 Bty D droop 1985-1990.
M38 1952 ,restoration project
Dodge 1/2 ton WC-24 Chassis WC-6 body..combo.
Dodge 1951 M43 ,SOLD
Harley Davidson WLA.type IV. SOLD
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
I will be pleased to see the manifold with linkage on it to compare how close my bellcrank fab and linkage is. I am glad I had my IN/EX machined. It took quite a bit to get them mated nicely to create a pure seal. I am trying to motivate myself to befin again on the cab. Not comfortable with my lack of sheet metal skill, but just need to dive in there.BATMOBILE1 wrote: ↑Tue Apr 24, 2018 10:29 amLooking good Oz,your almost thereto spent the last week working on cleaning all my manifold parts and throttle linkages ,so when i get to where you are now i have a few options, still not sure what to use.got a decent high rise inlet manifold from John at Midwest.will need to get the inlet and exhaust machined as they are quite a way out.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Dodge 1/2 Ton WC Throttle Linkage
Have you compared 1/2 Ton accelerator linkage parts with 3/4 Ton WC? I may be able to with NOS if some pieces are the same.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge 1/2 Ton WC Throttle Linkage
I received the bell crank from VPW. Steve said it was from am M37, close, but not the exact same pattern. He said original WC bell cranks are hard to find. I made the throttle bell crank to throttle lever myself trying to match the bends from batmobile's original.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Thu Jan 06, 2005 5:40 pm
- Location: Santa Rosa, CA
Re: Dodge 1/2 Ton WC Throttle Linkage
Can anyone tell me how this little block is connected to the bell crank? I have the little block but only has 1 post off the side.
[/URL][/img]
Here’s the little block style I have.
[/URL][/img]
I can’t get the banner out of the way.
[/URL][/img]
Here’s the little block style I have.
[/URL][/img]
I can’t get the banner out of the way.
1942 GPW
1942 T2 wla
1942 Bantam
1942 WC40
1941 Nash-kelvinator Ben hur
1943 Ben Hur
1944 Ben hur
1942 T2 wla
1942 Bantam
1942 WC40
1941 Nash-kelvinator Ben hur
1943 Ben Hur
1944 Ben hur
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Dodge 1/2 Ton WC Throttle Linkage
Will post a pic of the linkage and bellhousing bracket that I removed from NOS T-214 Engines.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
Who is online
Users browsing this forum: No registered users and 52 guests