Dodge T214 Engine Oil System
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Dodge T214 Engine Oil System
I am finishing the engine assembly on a Dodge T214 230cid engine that is an ordnance replacement engine in a Dodge WC12 1/2 ton. I am having difficulty trying to sort out the oil lines, tubes and fittings. The parts TM and diagram are not much help.
Can someone please post a few images AND details of the fittings that connect the engine to the oil filter (both ways) and the oil gauge. I have a pic of the left side of my engine and cannot figure out which of the oil holes are plugged, and which ones are for
A. Engine to oil filter
B. Oil filter to engine Boss 5
C. Engine to Oil gauge.
I have the three rubber hoses sold by VPW. I understand one goes to an elbow on the side, one to an elbow at the bottom and the other is part of the oil gauge line.
I just need to know more about fittings, connections and which of the 6 threaded bosses to use. A few pictures would be of great help, as would be lengths of the metal tubes between the various hoses.
Thanks in advance.
Can someone please post a few images AND details of the fittings that connect the engine to the oil filter (both ways) and the oil gauge. I have a pic of the left side of my engine and cannot figure out which of the oil holes are plugged, and which ones are for
A. Engine to oil filter
B. Oil filter to engine Boss 5
C. Engine to Oil gauge.
I have the three rubber hoses sold by VPW. I understand one goes to an elbow on the side, one to an elbow at the bottom and the other is part of the oil gauge line.
I just need to know more about fittings, connections and which of the 6 threaded bosses to use. A few pictures would be of great help, as would be lengths of the metal tubes between the various hoses.
Thanks in advance.
Last edited by 17thAirborne on Tue Jan 23, 2018 7:27 am, edited 1 time in total.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
For the record, 3 is for the dip stick. Some times I can be such a dip stick
I did speak with Steve at VPW about these. he stated that any of the horizontally drilled bosses, (1,2,4 or 6) can be used for pressure to the oil filter or to the oil gauge. Boss 4 is for the oil filter to engine return.
This leaves me with determining which is the CORRECT fitting for the line to filter and the line to gauge.
A. Engine to oil filter
B. Oil filter to engine Boss 5
C. Engine to Oil gauge.
I did speak with Steve at VPW about these. he stated that any of the horizontally drilled bosses, (1,2,4 or 6) can be used for pressure to the oil filter or to the oil gauge. Boss 4 is for the oil filter to engine return.
This leaves me with determining which is the CORRECT fitting for the line to filter and the line to gauge.
A. Engine to oil filter
B. Oil filter to engine Boss 5
C. Engine to Oil gauge.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
I guess I am slowly figuring this out. From the TM for the T214 engine, the following images leads me to believe (if the 1/2 ton oil placement is the same) that the following functions correspond to my image:
A. Engine to oil filter Boss 1
B. Oil filter to engine Boss 5
C. Engine to Oil gauge. Boss 4
Plugged Bosses: Boss 2,6
A. Engine to oil filter Boss 1
B. Oil filter to engine Boss 5
C. Engine to Oil gauge. Boss 4
Plugged Bosses: Boss 2,6
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- zepher11
- G-Lieutenant General
- Posts: 4355
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Dodge T214 Engine Oil System
I was thinking Oil to Oil Gauge was from Boss 4 (Edit: was 3 which is dipstick) as shown in your first photo. I'll check mine when I get home if you have no answer by then.
Last edited by zepher11 on Tue Jan 23, 2018 6:05 pm, edited 1 time in total.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
Thanks much. I was looking at your engine pics, but could not make them out. Close ups of the fittings would help immensely, then Ill post the part numbers that I find locally. You are always a big help
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- zepher11
- G-Lieutenant General
- Posts: 4355
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Dodge T214 Engine Oil System
Okay, the first two photos are of my WC52. The fittings are a little greasy. The second set of photos are from the Dodge WC16 which is the half-ton configuration in. It's a little tight in there with the radio suppression stuff:
- zepher11
- G-Lieutenant General
- Posts: 4355
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Dodge T214 Engine Oil System
Also, I notice that what you have marked as Boss 2 is actually the block coolant drain that has petcock valve. You can just see them on my photos to the right of the oil line in Boss 1.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
Zeph,
As usual, very Excellent! Thanks a bunch.
As usual, very Excellent! Thanks a bunch.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- zepher11
- G-Lieutenant General
- Posts: 4355
- Joined: Fri Aug 12, 2011 7:37 pm
- Location: The Real Northern CalifornIA
Re: Dodge T214 Engine Oil System
No problem Oz.
-
- G-Sergeant First Class
- Posts: 94
- Joined: Sun Apr 01, 2007 6:33 pm
- Location: ONOWAY, ALBERTA
Re: Dodge T214 Engine Oil System
Its interesting looking at your block that there were a early and late style of T214 engine block. I had a look at my 2 and the difference I spotted was the oil fill tube boss as the early one was a push in tube and the later block has the bolt on fill tube as you have.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
i have to dig through my greasy engine parts bag, but all i recall is the slide in filler tube. i was also puzzled by the two threaded holes. thanks for noticing that
post script: the filler pipe is the slide in type. looks like i have another part to eventually replace.
post script: the filler pipe is the slide in type. looks like i have another part to eventually replace.
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
-
- Sergeant Major of the Gee
- Posts: 362
- Joined: Tue Apr 19, 2016 9:19 pm
- Location: Australia
Re: Dodge T214 Engine Oil System
download/file.php?id=121166 Book manual
download/file.php?id=121164 Your engine.
Hi OZ
It's Peter from Australia.
I went through my dozens of dodge engines to have a look at the oil line. All my engine oil line shows all the same as on your book manual you post pictures on top.
Don't forget it will not show on the book manual that their is a 7 plug located behind end of the generator bracket like plug 6 so don't use it And don't use plug 6 there's no way you will fit the oil gauge line as the starter is Blocking it. Your Pictures on top
These engine on engine stand all same oil line. My engine collection
T215
T214
T245
T173
T212
Engine on the restored, unrestored and projects WC dodge
1942 wc51 T215 shows same.
1944 WC51 T214 show same.
1945 WC51 Fire dodge show different oil gauge line coming behind starter.
Hope this helps
Cheers Peter
download/file.php?id=121164 Your engine.
Hi OZ
It's Peter from Australia.
I went through my dozens of dodge engines to have a look at the oil line. All my engine oil line shows all the same as on your book manual you post pictures on top.
Don't forget it will not show on the book manual that their is a 7 plug located behind end of the generator bracket like plug 6 so don't use it And don't use plug 6 there's no way you will fit the oil gauge line as the starter is Blocking it. Your Pictures on top
These engine on engine stand all same oil line. My engine collection
T215
T214
T245
T173
T212
Engine on the restored, unrestored and projects WC dodge
1942 wc51 T215 shows same.
1944 WC51 T214 show same.
1945 WC51 Fire dodge show different oil gauge line coming behind starter.
Hope this helps
Cheers Peter
Last edited by Peterdodge6volt on Thu Jan 25, 2018 6:37 pm, edited 1 time in total.
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
Peter,
Thanks for posting your findings. All of this will those of us trying to finish Dodge engines.
all the best
Thanks for posting your findings. All of this will those of us trying to finish Dodge engines.
all the best
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
So far
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
- 17thAirborne
- G-Lieutenant General
- Posts: 5847
- Joined: Mon Jun 21, 2004 5:42 am
- Location: Central TN
Re: Dodge T214 Engine Oil System
So the question now...teflon tape or permatex to seal?
Oz
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Feb 43 GPW 98532 USA 20206257
Oct 70 Land Rover Series 2a 25334079G NZ16GF36
http://gpw.castraponere.com/ (My Restoration Page)
Who is online
Users browsing this forum: No registered users and 58 guests