Looking for tools God help me

[Steve Webb]

Good news is not any war time stuff but post war 40's 50's . I am making a set for my 3a and this is chance for you fella's if you have something not for your interest's or bought it and found out it's not wartime or had to buy stuff to get something you really wanted. So here is what I am looking for and the more from 1 source the better from shipping standpoint. My zip is 33967
Slip joint pliers
Needle nose pliers
Side cutters
Water pump/channel locks
Crescent wrench 4,6,8 or 10"
Ball Peen hammer 12 or 16 oz. Handle is not critical is you don't have it or it's damaged
SPW
screwdriver straight slot with wood handles 1/4, 5/16, 3/8 and 1/2
screwdriver phillips with wood handles #1,2 and 3
DBE set 1/4 to 1" ish
Doe set 1/4 to 1" ish

Please e-mail or PM me and thank you.

[pjones]

Steve,
Slip joint pliers, needle nose pliers and side cutters come in different lengths. Do you know what lengths you need? Any brand preferences?

phil

[Steve Webb]

Not really as it is just a kit someone would have probably just picked up as needed or whatever would have been locally available. The only thing is the screwdrivers I want the cabinet shaped ones not the round clunky handles.

This is what it is going to end up in

https://www.duluthtrading.com/store/pro ... 28017.aspx

[USAFpj]

Steve, we can get you a pretty nice postwar set together; something that would have been available during the 40's and 50's. I'll PM ya..

[Steve Webb]

Well I have everything coming from 1 source except for the screwdrivers and the box wrench set so rattle them drawer's

[d42jeep]

Well I have everything coming from 1 source except for the screwdrivers and the box wrench set so rattle them drawer's

These are heading to Steve today. He is still looking for screwdrivers and box wrenches. Somebody must have some!
-Don

[Steve Webb]

Tools arrived today Don. Very pleased and think if the other stuff gets acquired the roll will really be handy. I would probably like to get about a 4" pair of needle nose also. The long ones are pretty nice but might be too long in a couple places. Thanks, again.

[d42jeep]

Screwdrivers and DBE wrenches are on the way to Steve plus a small pair of Kraeuter longnoses. If the 3a ever has a problem on the road the tools will be on board in the roll.
-Don

[Steve Webb]

Got 2nd set today really fast from post office. Except for the knife, tester and small cold chisel everything else from Don and a big thanks to him. I also had gotten an ignition wrench set from Robin a while back dated 1956 same year as I was born so couldn't pass that up. It fits in toll box very nice and I am tickled to have this instead of a set of modern Chinese stuff.