G506 parts needed
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
G506 parts needed
Need a pair of good running boards for g506 trucks
- retro-roco
- G-Brigadier General
- Posts: 2498
- Joined: Thu Mar 27, 2003 10:54 am
- Location: Bloomington, IL, USA
Re: G506 parts needed
~
Last edited by retro-roco on Fri May 25, 2018 11:12 am, edited 1 time in total.
Kirk Gustafson
359th Infantry Regt. 90th Div. WWII HRS
1942 Chevy G506 1-1/2 ton 4x4 Cargo
1943 Ben Hur water trailer
359th Infantry Regt. 90th Div. WWII HRS
1942 Chevy G506 1-1/2 ton 4x4 Cargo
1943 Ben Hur water trailer
-
- G-First Lieutenant
- Posts: 616
- Joined: Fri Jul 02, 2004 5:58 pm
- Location: Victoria Australia
Re: G506 parts needed
Hi Kirk,retro-roco wrote: ↑Sat May 05, 2018 6:23 pmIf you have trouble finding these, you can make them by cutting the curved fender notch off a civilian Chevy truck fender. I have a couple that I plaan to modify for my truck. They will require the addition of an extension to the top, so they reach the bottom of the rockers.
Can you do us all a favor please mate when you do the mod on the civilian Chevy side steps can you post some photo's how you did it.
Cheers
Ian
from down under
MB 311192 ARN 157967
Gpw 161919
Aus Trailer No3a, 43
Aus Trailer No4, 45
41 Fordson WOT2-H
G506 Chevy
Gpw 161919
Aus Trailer No3a, 43
Aus Trailer No4, 45
41 Fordson WOT2-H
G506 Chevy
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
I would also like to see that photos would be great
-
- G-Major General
- Posts: 3472
- Joined: Sat Jun 05, 2010 2:51 pm
- Location: Evergreen State
Re: G506 parts needed
Are you sure our rusty junk parts are going to be good enough for you 560sec? Last time you got all mad that WE here on the "G" are nothing more than HACKS who refuse to zinc plate our parts before installation.......
AAAAAHH, YEAH! There are those of us here who have EXCELLENT MEMORY RETENTION and don't forget those who flaunt a big EF-YEW in our faces!!! Oh yeah, I have a very nice pair of spare running boards too. I removed them from a truck I found in West Covina California...........
AAAAAHH, YEAH! There are those of us here who have EXCELLENT MEMORY RETENTION and don't forget those who flaunt a big EF-YEW in our faces!!! Oh yeah, I have a very nice pair of spare running boards too. I removed them from a truck I found in West Covina California...........
In Loving Memoriam: George R. Hancock. 20 Mar. 1938 - 11 Jan. 2017. U.S.A.F. 1956 - 1962. R.I.P. Dad.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
- signsup
- banned
- Posts: 3932
- Joined: Wed Jan 25, 2012 6:30 am
- Location: Winston, GA
Re: G506 parts needed
I presume the running boards being sought must be Pebble Beach Concourse quality? Or, will they just end up being that way after the Midas touch.
Robert Brough
Winston, GA
2018 MVPA Honor Service Award
President, GA MVPA
Winston, GA
2018 MVPA Honor Service Award
President, GA MVPA
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
Sorry D.R.H No Rusty parts with holes all over will not do.But if you want to sell your good ones let me know.By The way I am doing a car for Pebble Beach at this time in fact we have a Duesenburg a Mercedes and a micro car that all will be going to Pebble if you want send me your phone number so I can send you some photos and we can talk about your running boards.Have a great day.
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
Update I found a right side I still need to find a left passenger side g506 running board let me know.thanks
-
- G-Major General
- Posts: 3472
- Joined: Sat Jun 05, 2010 2:51 pm
- Location: Evergreen State
Re: G506 parts needed
Quite frankly Mr. Huntington Beach, I really don't want to have much more to do with you. Except to tell you that I wouldn't even sell the rust from the floor of my shop to you. And by the way, I couldn't care less about your Hoity Toity pebble beach snobbery cars.
In Loving Memoriam: George R. Hancock. 20 Mar. 1938 - 11 Jan. 2017. U.S.A.F. 1956 - 1962. R.I.P. Dad.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
D.H.R look up Jealous see what it says.I worked very hard to get good enough to restore cars that enter concourse car shows and proud of it there are plenty of hacks out there sorry to hurt your feelings.
-
- Sergeant Major of the Gee
- Posts: 300
- Joined: Tue Nov 24, 2015 6:25 pm
- Location: Lost Angels California
Re: G506 parts needed
Uhhmm, D.H.R. isn't jealous.....
Proud caretaker of U.S.A. truck 3219442-S 1943 Chevrolet Cab Over Engine 1 1/2 4x4
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
So you know him.Then tell me what is it then.
-
- G-Major General
- Posts: 3472
- Joined: Sat Jun 05, 2010 2:51 pm
- Location: Evergreen State
Re: G506 parts needed
Thanks Thad for the back-up.
Hey Mr. 560sec, why not ask me directly? I'll tell you the truth about "whats with ME". I don't like people like you, I have been burned by your kind too many times to count!! You insulted ME and some of my Online Friends here on the "G", and I AM NOT one to keep my mouth shut about it either!!! Why don't you search my posts and see what kind of work that I and They do. As far as being jealous, phew, that was the first deadly sin of mine I abolished over 27 years ago. Besides who would be jealous of an arrogant @ss, such as yourself .................
I searched your posts and found what ticked folks off about you. REMEMBER THIS !?!?!???!!!!! I guess YOU care what "WE" say now, huh!!??
Written by 560sec...........
Here is the story.I build concourse cars for a living. i do concourse refinishing i have won pebble beach two times well with that said.I bought three g506 trucks and took the best parts off all three for the body parts.all of the parts i have are in great shape.i do not have any mechanical parts.the doors are like new.cab has two small areas that need patches.i have two hoods one new and one used the new one has a couple of small dents.the side panels have chevy on them.i have a wood steering wheel fan shroud lower radiator panel that goes below the grille rear glass guard left upper grille guard and lamp just to name some of the good parts. some of the parts have been powder coated like the lower cab right and left stiffening brackets and cab springs the stripping was expensive i paid more then $ 3000.00 to strip all the parts.I sold all of the mechanical parts frame and everything else. oh this will piss a lot of you off i even chromed some parts yes show chrome. gauge panel dash lamp covers windshield brackets turn signal assy. windshield opener brackets and more you factory guys are rolling over and all pissed off.As you see i didnt care about being correct on this build.You see i have to do this every day of my life i hand paint with a brush different colors on nuts and bolts so it looks factory.not on this one.I WILL NOT PART THIS OUT AT ALL.because if nobody wants to take this good deal i will put it on the back burner and finish it.I will not waste my time on putting all of the parts on a web site i do not have the time but i will text photos to a real interested buyer. for you guys that will say the spelling is bad the grammer is bad.ya i dont care THE REASON i am selling this is because i bought three mercedes years ago one just sold for $250.grand and the other one sold for $180.thousand i bought both cars for $30 k.any way i have been doing mercedes benz cars for over thirty years and would like to do those first.I know i spent way to much on this truck but when i do a truck or a car it has to be the best all parts were stripped the washed with phosphate then baked i just did a benz 280 sl it was 2.220.00 just for the body no moving parts not cheep i have seen a lot of good mechanical and frame restorations on these g506 trucks but when ii see the metal work and prep i have not see to much that i would say great maybe there are some really good metal guys out there on this these trucks. i have not seen it yet i guess i am way to picky for a g506 truck.I am not a real good metal guy thats why i needed the best parts.So if you want a real easy body build i have it since most of these trucks are rust buckets.I have a rust free frame located if i do not sell this truck. i also found a 92 dodge diesel one ton 4x4 truck. with 42 inch tires and a aluminum troop bed all to spec.s now thats cool.also comes with i think i have all the parts for the back canvas metal parts.any question email.sscoupes@gmail.com i know with some of you guys are going to bitch and complain about things i have said and done because i have seen it before but you just sound like bitchy bitchy women if you have any questions about what parts are missing from the body no glass.oh i have the hood prop rod.i have all window frames and mechanical parts no radiator just shroud.no running boards.just ask. TAKING $8000.00 I know most of you guys are going to say he is nuts crazy i will not pay that thats to much.I have way more that that into these parts.To you guys that say that.You do not build quality. JUST TRUCKS WITH RUST AND BONDO AND FLAT PAINT TO HIDE THE DENTS.These parts are for the builder where quality maters and nothing else will do and dont complain about thats to much thats because most people cut corners i do not.Do not complain and say thats to much because the truck is not worth it thats not true i built a car that one sold at the gooding auction for $90 thousand wow everyone said no one would top this less than a year later a car i built sold for $175.thousand if you have true quality you will get the money but i do not think g506 guys build them to sell but thats even better you will have the best.Well lets see the Crimp One Off hit the fan. NO BS.NO CHEEP SKATES.remember i do not care what you say.$8000.00 will not even pay for the chrome on one of my benz cars.but its a start.
Hey Mr. 560sec, why not ask me directly? I'll tell you the truth about "whats with ME". I don't like people like you, I have been burned by your kind too many times to count!! You insulted ME and some of my Online Friends here on the "G", and I AM NOT one to keep my mouth shut about it either!!! Why don't you search my posts and see what kind of work that I and They do. As far as being jealous, phew, that was the first deadly sin of mine I abolished over 27 years ago. Besides who would be jealous of an arrogant @ss, such as yourself .................
I searched your posts and found what ticked folks off about you. REMEMBER THIS !?!?!???!!!!! I guess YOU care what "WE" say now, huh!!??
Written by 560sec...........
Here is the story.I build concourse cars for a living. i do concourse refinishing i have won pebble beach two times well with that said.I bought three g506 trucks and took the best parts off all three for the body parts.all of the parts i have are in great shape.i do not have any mechanical parts.the doors are like new.cab has two small areas that need patches.i have two hoods one new and one used the new one has a couple of small dents.the side panels have chevy on them.i have a wood steering wheel fan shroud lower radiator panel that goes below the grille rear glass guard left upper grille guard and lamp just to name some of the good parts. some of the parts have been powder coated like the lower cab right and left stiffening brackets and cab springs the stripping was expensive i paid more then $ 3000.00 to strip all the parts.I sold all of the mechanical parts frame and everything else. oh this will piss a lot of you off i even chromed some parts yes show chrome. gauge panel dash lamp covers windshield brackets turn signal assy. windshield opener brackets and more you factory guys are rolling over and all pissed off.As you see i didnt care about being correct on this build.You see i have to do this every day of my life i hand paint with a brush different colors on nuts and bolts so it looks factory.not on this one.I WILL NOT PART THIS OUT AT ALL.because if nobody wants to take this good deal i will put it on the back burner and finish it.I will not waste my time on putting all of the parts on a web site i do not have the time but i will text photos to a real interested buyer. for you guys that will say the spelling is bad the grammer is bad.ya i dont care THE REASON i am selling this is because i bought three mercedes years ago one just sold for $250.grand and the other one sold for $180.thousand i bought both cars for $30 k.any way i have been doing mercedes benz cars for over thirty years and would like to do those first.I know i spent way to much on this truck but when i do a truck or a car it has to be the best all parts were stripped the washed with phosphate then baked i just did a benz 280 sl it was 2.220.00 just for the body no moving parts not cheep i have seen a lot of good mechanical and frame restorations on these g506 trucks but when ii see the metal work and prep i have not see to much that i would say great maybe there are some really good metal guys out there on this these trucks. i have not seen it yet i guess i am way to picky for a g506 truck.I am not a real good metal guy thats why i needed the best parts.So if you want a real easy body build i have it since most of these trucks are rust buckets.I have a rust free frame located if i do not sell this truck. i also found a 92 dodge diesel one ton 4x4 truck. with 42 inch tires and a aluminum troop bed all to spec.s now thats cool.also comes with i think i have all the parts for the back canvas metal parts.any question email.sscoupes@gmail.com i know with some of you guys are going to bitch and complain about things i have said and done because i have seen it before but you just sound like bitchy bitchy women if you have any questions about what parts are missing from the body no glass.oh i have the hood prop rod.i have all window frames and mechanical parts no radiator just shroud.no running boards.just ask. TAKING $8000.00 I know most of you guys are going to say he is nuts crazy i will not pay that thats to much.I have way more that that into these parts.To you guys that say that.You do not build quality. JUST TRUCKS WITH RUST AND BONDO AND FLAT PAINT TO HIDE THE DENTS.These parts are for the builder where quality maters and nothing else will do and dont complain about thats to much thats because most people cut corners i do not.Do not complain and say thats to much because the truck is not worth it thats not true i built a car that one sold at the gooding auction for $90 thousand wow everyone said no one would top this less than a year later a car i built sold for $175.thousand if you have true quality you will get the money but i do not think g506 guys build them to sell but thats even better you will have the best.Well lets see the Crimp One Off hit the fan. NO BS.NO CHEEP SKATES.remember i do not care what you say.$8000.00 will not even pay for the chrome on one of my benz cars.but its a start.
In Loving Memoriam: George R. Hancock. 20 Mar. 1938 - 11 Jan. 2017. U.S.A.F. 1956 - 1962. R.I.P. Dad.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
-
- G-Sergeant First Class
- Posts: 84
- Joined: Sat Nov 05, 2016 11:35 am
- Location:
Re: G506 parts needed
I have been on websites like this one before you put parts cars trucks up for sale and the people give you shipt for how much you want for it if you don't like the price don't say anything and about burning you how can you say that you just make things up and you DA friends on this site believe you what a joke I call it how I see it I see a lot of nice work here but some is marginal and some are doing there best I understand that I do not care if you like me and that I will burn you man that's all you can come up with wow So how much do you want for your running boards.let me know
-
- G-Major General
- Posts: 3472
- Joined: Sat Jun 05, 2010 2:51 pm
- Location: Evergreen State
Re: G506 parts needed
YA KNOW I was just thinking about how much fun it would be to have a battle of wits with a guy like the one who authored this thread, but then I realized that I would be going to war against an UNARMED OPPONENT and that just wouldn't be fair. Would it?
I mean really, this GUY has such a hard time with his grammar, punctuation, sentence and paragraph composition, DO I REALLY BELIEVE HE BUILDS PEBBLE BEACH CONCOURSE READY/WORTHY VEHICLES??? I don't think so!!! I digress..............
I mean really, this GUY has such a hard time with his grammar, punctuation, sentence and paragraph composition, DO I REALLY BELIEVE HE BUILDS PEBBLE BEACH CONCOURSE READY/WORTHY VEHICLES??? I don't think so!!! I digress..............
In Loving Memoriam: George R. Hancock. 20 Mar. 1938 - 11 Jan. 2017. U.S.A.F. 1956 - 1962. R.I.P. Dad.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
In Loving Memoriam: Ann Hancock, 08 Mar. 1934 - 25 Sept. 2021. R.N. 1960 - 2005. R.I.P. Mom.
Thank You BOTH for always being there.
My YouTube Channel. https://www.youtube.com/channel/UCaMKEv ... M3g/videos.
Who is online
Users browsing this forum: Warren Duchesne and 57 guests