To All Concerned (ALCON)
Having moved all my goodies to Prescott AZ, I am finally getting the opportunity to work on some long overdue projects that have been on ice since 2013. One of those projects is my M151A2 that needs a few items so that I can get her up and running. Here's what I'm looking for.... used items preferred but NOS acceptible if that's all that's out there:
1. The two little brackets for the rear passenger seat that bolt into the side of the body and hold the pins of the rear seat up. COMPLETED
2. A tool box cover.
3. A radiator shroud. COMPLETED
4. The handle that mounts on the dashboard on the passenger side to assist the passenger in climbing in and out of the vehicle. COMPLETED
5. The short little connecting rod that connects the throttle from the carb linkage to the bellcrank on the manifold. ..
6. The little metal mount that fits under the carb that the throttle spring attaches too from the carb.
And what do you recommend regards a good rebuild kit for my Zenith Carb that will have the components to stand up to the sh!ty ethanol fuel and also a kit for the fuel pump (if there is such a thing) that will also do the same? COMPLETED
THANK YOU FOR ALL OF THE HELP!!*
Thank you for any leads.
Mark
FOUND !!! Looking for a Few Parts to Get My A2 Project up and Running
- mkoloc
- LTC, U.S. Army
- Posts: 848
- Joined: Tue May 29, 2007 9:52 pm
- Location: 1631 Bitter Creek Lane, Batavia OH 45103
- Contact:
FOUND !!! Looking for a Few Parts to Get My A2 Project up and Running
Last edited by mkoloc on Sun Jul 16, 2017 9:09 pm, edited 2 times in total.
LTC Mark Koloc USA (RET)
MVPA Member # 31144
1631 Bitter Creek Lane
Batavia, OH 45103
Cell: 1.715.821.9426
mkoloc44@yahoo.com
MVPA Member # 31144
1631 Bitter Creek Lane
Batavia, OH 45103
Cell: 1.715.821.9426
mkoloc44@yahoo.com
-
- G-Major
- Posts: 913
- Joined: Wed Apr 16, 2014 6:20 pm
- Location:
- Contact:
Re: Looking for a Few Parts to Get My A2 Project up and Runn
I have the seat brackets. PM on its way.
1942 VEP GPW, J-2 winch, BC-659, 1919a4
1945 GPW, 1943 MBT
Sold - 1967 M151a1, 1943 MB, M416
www.ToThePointPolygraph.com
1945 GPW, 1943 MBT
Sold - 1967 M151a1, 1943 MB, M416
www.ToThePointPolygraph.com
- Eddie Holland
- G-Colonel
- Posts: 1582
- Joined: Sat Nov 29, 2003 4:22 am
- Location: Calvert City Kentucky
Re: Looking for a Few Parts to Get My A2 Project up and Runn
I pmed you on a nice tool box cover I have
42 GPW 12/30/42 Matching #'s 88,638 being restored
Restoring
M-151 Ford
M-151-A1 Ford
M-151-A2 AMG restored
2 M-416 restored
restoring 2 M-100s
Restoring
M-151 Ford
M-151-A1 Ford
M-151-A2 AMG restored
2 M-416 restored
restoring 2 M-100s
- mkoloc
- LTC, U.S. Army
- Posts: 848
- Joined: Tue May 29, 2007 9:52 pm
- Location: 1631 Bitter Creek Lane, Batavia OH 45103
- Contact:
Re: Looking for a Few Parts to Get My A2 Project up and Runn
ALCON: THANK YOU!!!! All parts sourced.
LTC Mark Koloc USA (RET)
MVPA Member # 31144
1631 Bitter Creek Lane
Batavia, OH 45103
Cell: 1.715.821.9426
mkoloc44@yahoo.com
MVPA Member # 31144
1631 Bitter Creek Lane
Batavia, OH 45103
Cell: 1.715.821.9426
mkoloc44@yahoo.com
Who is online
Users browsing this forum: No registered users and 2 guests